Search found 743 matches

by BertB
20 Oct 2015, 08:54
Forum: Introduce yourself
Topic: Introduction Elias Quint
Replies: 1
Views: 825

Re: Introduction Elias Quint

Hi Elias,
Welcome to the club.
I hope we hear more from you.

Regards,
Bert
by BertB
19 Oct 2015, 22:26
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6757

Re: reed relais

The ULN2803 consists of 8 darlington drivers with open collector outputs. On the output side (right end) they can sink up to 500 mA and can withstand up to 50 volts. The output is the reverse of the logic level on the input side (left). So a logic 1 on the input will make the output go low. There is...
by BertB
19 Oct 2015, 19:15
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

That is correct but the ESP then acts as an access point. From that point on, you can login to that ESP and make the appropriate settings to make it an STA (station) When you enter your WifiSSID and your Wifikey and command the ESP to reboot (in the tools tab) the ESP will ask a free IP from your ro...
by BertB
19 Oct 2015, 18:55
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Webkey is the password to get on your wifi.
by BertB
19 Oct 2015, 14:26
Forum: Introduce yourself
Topic: Hi all !!
Replies: 1
Views: 867

Re: Hi all !!

Welcome to you too Ronny.

greetings,
Bert
by BertB
19 Oct 2015, 14:25
Forum: Introduce yourself
Topic: Hello haubke i'm from the netherlands
Replies: 2
Views: 1021

Re: Hello haubke i'm from the netherlands

Hi Huub,

Welcome to out forum. Hope to hear more from you.

Regards,
Bert
by BertB
19 Oct 2015, 14:25
Forum: Introduce yourself
Topic: Seb from France
Replies: 2
Views: 1204

Re: Seb from France

Hi Seb, welcome to the club.

Greetings,
Bert
by BertB
18 Oct 2015, 20:51
Forum: ESP Easy: Projects / Applications
Topic: RFID Access control / door lock actuator
Replies: 42
Views: 24643

Re: RFID Access control / door lock actuator

@rtenklooster
Hi, where can I get you sketch?
by BertB
16 Oct 2015, 15:14
Forum: ESP Easy: Projects / Applications
Topic: Rain Sensor
Replies: 26
Views: 13271

Re: Rain Sensor

This is correct. Best would be to use alternate currents. But that is also a difficult solution.
by BertB
16 Oct 2015, 09:08
Forum: ESP Easy: Projects / Applications
Topic: Rain Sensor
Replies: 26
Views: 13271

Re: Rain Sensor

Do you have a picture and a link to the type of rain sensor you used?
by BertB
15 Oct 2015, 15:19
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Hi guys, just wondering if any of you would be interested to have firmware update from the WebUI using HttpUpdate from OTA sample of Arduino ESP8266 ? I think is should be easy to integrate. Yes, I am. But I am not one of the software guru's here :) About firmware size, may be we can play with the ...
by BertB
14 Oct 2015, 12:55
Forum: ESP Easy: Software
Topic: Need a Build R20 With all
Replies: 6
Views: 2196

Re: Need a Build R20 With all

"The ESP Easy firmware is currently in alpha stage where we're working on design, functionality and stability." It's not a problem you're talking about issues, that's why we are here.. to help each other and to make the esp code more stable and more useful. But a lot of bugs... that's way to negati...
by BertB
13 Oct 2015, 10:48
Forum: ESP Easy: Software
Topic: BMP180 Domoticz
Replies: 1
Views: 2735

Re: BMP180 Domoticz

Use the second one
by BertB
13 Oct 2015, 10:46
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

@Martinus.
You hardly ever use all possible plugins, so is it not possible to include some kind of checkbox mechanism to choose te desired functionality in the Easy?
by BertB
13 Oct 2015, 08:30
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Charly86 wrote: Another one R38 has TSL2561 I2C Luminosity sensor (If pull request is accepted)
See request here https://github.com/ESP8266nu/ESPEasy/pull/7
Great! I had this one on my list too.
by BertB
08 Oct 2015, 21:31
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

just moved to R31. Looks fine so far, but also with R30 on a NodeMcu 1.0 (with BMP180, DHT22, 1 DS18B20 on the board and 1 DS18B20 via cable) I had no problems.
On R29 I had to give both DS18B20 the same device number, but as of R30 that was no longer necessary.
by BertB
06 Oct 2015, 21:54
Forum: ESP Easy: Software
Topic: How send data to LCD
Replies: 5
Views: 1985

Re: How send data to LCD

When I execute your example, I see Message in the lcd.The example in the tutorial only works for Connexio, not for Easy, because Connexio uses the LCD plugin.
In Easy, when you enter lcdwrite 1,1,Hello World, you will see Hello World starting on the first line, in the first column of the lcd
by BertB
06 Oct 2015, 09:08
Forum: Introduce yourself
Topic: I want to learn - Seeking instruction
Replies: 1
Views: 937

Re: I want to learn - Seeking instruction

Hi,
Welcome to the club.
Hope you have plenty of fun here.

Regards,
Bert
by BertB
06 Oct 2015, 09:04
Forum: Introduce yourself
Topic: Carsten from Germany
Replies: 1
Views: 1039

Re: Carsten from Germany

Hi Carsten,

Welcome to the club.
Hope you have plenty of fun here.

Regards,
Bert
by BertB
06 Oct 2015, 09:01
Forum: ESP Easy: Software
Topic: How send data to LCD
Replies: 5
Views: 1985

Re: How send data to LCD

Hi,
Did you check the Wiki?
by BertB
04 Oct 2015, 20:39
Forum: ESP Easy: General Discussion
Topic: Error when flashing esp-12 modul
Replies: 10
Views: 2944

Re: Error when flashing esp-12 modul

Did you try additional reset?
by BertB
04 Oct 2015, 17:51
Forum: ESP Easy: Projects / Applications
Topic: RFID Access control / door lock actuator
Replies: 42
Views: 24643

Re: RFID Access control / door lock actuator

Hi Richard,
I have completed my setup with an RFID reader and get the RFID tags in the Domoticz Text device.
Now, I would like to add your sketch to my setup. Can you please tell me where to download it?
by BertB
04 Oct 2015, 15:57
Forum: ESP Easy: Hardware
Topic: Factory reset
Replies: 6
Views: 6704

Re: Factory reset

Together :)
by BertB
30 Sep 2015, 17:34
Forum: ESP Easy: Software
Topic: My first ESPEasy Sensor ...
Replies: 5
Views: 1968

Re: My first ESPEasy Sensor ...

Look okay to me.

What is the logic level GPIO 0 and 2?
Is the FTDI-TX also 3.3 volt?

Did you try addiditonal reset?
by BertB
30 Sep 2015, 15:39
Forum: ESP Easy: Hardware
Topic: ESP-01 and BMP085/BMP180 sensor
Replies: 6
Views: 4203

Re: ESP-01 and BMP085/BMP180 sensor

You do not need to define anything in the software. For the ESP-0,1 do not use a version above 20. Once active, select in the hardware tab, via web interface a port for the SDA and one for SDC. Connect the BMP accordingly. You can check the connectivity in the Tools tab, with the I2C scanner. After ...
by BertB
28 Sep 2015, 22:57
Forum: Introduce yourself
Topic: Ger from Emmen The Netherlands
Replies: 4
Views: 1654

Re: Ger from Emmen The Netherlands

Martinus wrote:
BertB wrote:I am interested in having a dust sensor myself.
So you can build an automatic vacuum cleaner robot ? :geek:
Yep :D

And for climate control.
by BertB
28 Sep 2015, 21:52
Forum: Introduce yourself
Topic: Ger from Emmen The Netherlands
Replies: 4
Views: 1654

Re: Ger from Emmen The Netherlands

Hi Ger,
Welcome to the forum.
I hope you can show us your projects here sometime in the future.
I am interested in having a dust sensor myself.
by BertB
28 Sep 2015, 20:50
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Martinus wrote:We are on R25 on github, support for non latching push button switches.
So am I :)
by BertB
28 Sep 2015, 17:44
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Now, I have two DS18B20 sensors on pin 12. Both are correctly recognized by the Easy, but I think somthing is wrong with reading the values, because both sensors give the same readings. This is almost impossible since one sensor is mounted directly on the breadboard and the other one via a cable of...
by BertB
26 Sep 2015, 22:00
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Now, I have two DS18B20 sensors on pin 12. Both are correctly recognized by the Easy, but I think somthing is wrong with reading the values, because both sensors give the same readings. This is almost impossible since one sensor is mounted directly on the breadboard and the other one via a cable of ...
by BertB
26 Sep 2015, 21:50
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6757

Re: reed relais

Do the relays work with 3.3 volts?
by BertB
26 Sep 2015, 15:01
Forum: Introduce yourself
Topic: Lars from Sweden
Replies: 3
Views: 1308

Re: Lars from Sweden

Welcome Lars.
I hope you will have a lot of fun with ESPEasy and will share your experiences and projects with us.
Greatings,
Bert
by BertB
26 Sep 2015, 14:56
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 126512

Re: ESP Easy Releases

Ziet er goed uit. Hoe kan je die CSS uploaden?
Ik zie trouwens dat de node list niet meer functioneert. Dat vond ik wel een handig tooltje om snel van node naar node te hoppen.

update:
Ik heb hem al. Gewoon even met Kladblok in een bestandje zetten dat esp.css heet en uploaden maar.

Werkt erg leuk.
by BertB
26 Sep 2015, 12:56
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6757

Re: reed relais

Please also check if your relays have clamp diodes. They prevent output transistors being destroyed by flyback currents. If the relays do have such diodes, they also have a distinctive + and - pin. This is not always shown on the housing. To overcome the 5 volt versus 3.3 volt problem, you could use...
by BertB
25 Sep 2015, 12:58
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6757

Re: reed relais

asm7100 wrote:Just made this quick.
Nice picture, but please keep in mind that the collector of a npn transistor needs a positive voltage with respect to the emitter to work.
Also keep in mind that some remotes scan their buttons.
What chip is being used in the remote?
by BertB
15 Sep 2015, 18:03
Forum: ESP Easy: Software
Topic: Arduino IDE staging release 1106 has issues...
Replies: 3
Views: 1636

Re: Arduino IDE staging release 1106 has issues...

With which release has R20 been compiled?
by BertB
29 Aug 2015, 19:02
Forum: ESP Easy: Projects / Applications
Topic: My Built-in-wall domoticz switch + pir + barometer
Replies: 17
Views: 19524

Re: My Built-in-wall domoticz switch + pir + barometer

Interesting example.
What do you use to power this up?
by BertB
25 Aug 2015, 22:05
Forum: Introduce yourself
Topic: Introduction to Bert
Replies: 0
Views: 956

Introduction to Bert

Hi, I was born in a time computers still occupied large halls and miniaturisation was yet to come, but music was rocking. Yes, in the late fifties. Bert is my name and I love technology. Born and raised in Utrecht, I earned my degree in elektronics with a specialisation in telecommunications. During...
by BertB
25 Aug 2015, 21:22
Forum: ESP Easy: Hardware
Topic: Cann't connect to my wifi network anymore
Replies: 7
Views: 5561

Re: Cann't connect to my wifi network anymore

Mediacj wrote:I have uploaded release 12 and now it works again :D

Will try to put 15 on it and see if it keeps working.

edit: and yes release 15 works also after uploading it again(what I did before) :roll:

ESP moves in mysterious ways.
by BertB
25 Aug 2015, 19:47
Forum: ESP Easy: Hardware
Topic: Cann't connect to my wifi network anymore
Replies: 7
Views: 5561

Re: Cann't connect to my wifi network anymore

Hard to say what is wrong. I have had many struggles with the ESP. Sometimes I even had to go back to the AT mode and the very first versions of Easy in order to get it going again. The only thing I always change in the source are the SSID and the WPA key. This is to avoid AP mode. The rest I fill i...
by BertB
25 Aug 2015, 18:24
Forum: ESP Easy: Hardware
Topic: Cann't connect to my wifi network anymore
Replies: 7
Views: 5561

Re: Cann't connect to my wifi network anymore

Hello Mediacj, I do not understand your question very well. You say there is no Wifi connection, but I understand you can access the Web interface. This implies that you have a Wifi connection. Did you try to issue the command Settings in the serial interface? What is the outcome? Initially, ESP Eas...