Running low on suggestions
Have you set 'Unit nr.' under config to other than zero?

I have the same setup and it works for me on 147RC8. I connected the sensor according to: http://lazyzero.de/elektronik/esp8266/d ... leep/start (Apart from the deep-sleep part).
On my task setting I have '%value% in both formulas. And yes, you do need a IDX/var, for it to work.

I have contact with Martinus and access to the main repository. Fortunately he will stay involved with the project, but currently doesn't have the time to do any real coding. So he'll be on the background (for now). I'll keep you posted. Hi, Your efforts are very appreciated, it would be so sad if ...

@Toffel969 Perhaps kicking an open door, but do you apply for coverage of your premises 1 single Wifi-AP, or multiple APs, or 1*AP+repeaters? Have the own experience that for a setup with physically wide-spread ESP8266s, 1 single AP/router is hardly sufficient to cover the premises. Only the 2 othe...

Sorry, never had issues with OTA on any of my devices, so I can't help you there

Maybe incompatibility between your SSID+PSK and ESP? Some symbols which ESP don't like? For me it works by: 1) Flash ESP8266 with ESPeasy 2) Power on 3) Connect iPad to ESP_0 (PSK='configesp') on IP: 192.168.4.1 4) I select my SSID in the list and enter PSK and select connect. 5) ESP8266 connects to...

Well I just tried it, and no it does not work off-the-shelf. According to the code, you must issue a 'reset' via serial for defaults to be loaded. I did not try that.

If I read the code correctly, then if the SSID is changed to something else than 'ssid' then the settings should be used, but I'm no expert in Arduino code

Personally I'd ruin ESPeasy if I was to contribute with coding, but I'd be happy to donate money if it could ensure the project's future.

All I can think of is poor soldering which is affected by the mechanical difference.

Not only does this sound strange, it sounds very strange
What do you mean by 'they don't work'?

Well, it seems like it's only the iOS app which seems to somehow bring H801 to it's knees. It happens if you 'float' your finger around on the color-picker.. Strange.

230V Solid State relay?

Quick questions:

1) Which ESP version?
2) You don't have an old rule defined on the ESP?

Hi, I've now flashed a H801 with 147RC8 + the latest P123_lights. I've got a RGB led strip connected. Using OH2+MQTT + the items/rules examples provided, it works fine for a while by using the color picker. After a while it suddenly it stop updating, and load goes to 100% on the H801. I can see that...

Very well done Guys! Thanks for your efforts

Fantastic! Thanks for your post, I've been starting on the excact same project .
Did you manage to implement a color-picker in OH2 working over MQTT?

No I didn't, so of course I searched for it . It does sound like it could solve this, so I'll see if I can compile and test it.

Hi, I've been fiddling around with espeasy for some time now, and can now control simple devices like Sonoff from Openhab2 via MQTT. I've now flashed a cheap H801 LED driver with 147 RC8 and can control the RGB strip via http commands. But I'd like to choose the color via a color-picker on Openhab2 ...

Hi, From what I can read the ESP8266 can operate in either 802.11b/g or n mode, all three modes using different amount of power when transmitting (from ~215mA for 802.11b down to ~135mA for 802.11n mode). At the same time running in 802.11b mode, has a negative impact on the overall 2.4GHz performan...

i have tried that plugin, but I often find the fading to be very unstable.

Of course :). I've tried to source the box i linked to, as it seems relatively small and has a clean design, but didn't find it :(. I'm no antenna designer, but I agree that the antenna performance for a lot of the ESP8266 based products are not great. I'm lucky enough to have 3 AP's in our home so ...

Hi Stuntteam, Something like this: http://thumbs2.picclick.com/d/l400/pict/282060001053_/NTC10k-DESIGN-RAUM-F%C3%9CHLER-TEMPERATURF%C3%9CHLER-INNENRAUM-HEIZUNG-KLIMA.jpg Sorry but to me, that box seems to have higher WTF factor than WAF ;) . For me this http://www.energibutiken.se/en/temp-sensors/2...

This sounds interesting. I'm using a H801 with espeasy R120 but can't seem to find a good dimmer solution.

Hi, This sounds very interesting and I think you're on the right track. In terms of pricing for such devices, you can look at ITEAD and see how the "competitive landscape" is. However I'm sure German Engineering will add true CE marking as well as better quality in terms of look & feel...