Search found 773 matches
- 13 Jan 2019, 14:58
- Forum: RFlink: General Discussions
- Topic: Temp / Hygro F007TH troubles
- Replies: 5
- Views: 7443
Re: Temp / Hygro F007TH troubles
RFlink does not transmit F007 or any other weather station signals.. it only receives..! If you want to try a RX/TX module that is untested/unlisted then you should probably also get one of the listed modules for reference.. like the rbx6 or so. Make sure devices are not too far away when testing bu...
- 08 Jan 2019, 19:51
- Forum: RFlink: General Discussions
- Topic: How to change direction of Somfy roller shutters
- Replies: 3
- Views: 9339
Re: How to change direction of Somfy roller shutters
Isnt that something you can easily change in Domoticz?
- 04 Jan 2019, 16:44
- Forum: RFlink: General Discussions
- Topic: RFLink Mini GPIO and domoticz
- Replies: 4
- Views: 5784
Re: RFLink Mini GPIO and domoticz
Yeah, the first one is double.. but you are right..
- 04 Jan 2019, 10:16
- Forum: RFlink: General Discussions
- Topic: RFLink Mini GPIO and domoticz
- Replies: 4
- Views: 5784
Re: RFLink Mini GPIO and domoticz
Go to the hardware tab, use the create manual device button listed behind rflink and add the device.. Here you enter a line that would normally show up in a rflink log like for example 20;04;TriState;ID=86a8aa;SWITCH=1;CMD=ON; Thus your 10;GPIOset;31;0;ON; needs to be converted to: 20;00;GPIOset;ID=...
- 14 Dec 2018, 15:11
- Forum: RFLink: Unsupported devices
- Topic: Kerui D026 inconsistently decoded
- Replies: 20
- Views: 33437
Re: Kerui D026 inconsistently decoded
That is one of the reasons why we are taking time to rewrite and redo the code
- 02 Dec 2018, 12:49
- Forum: RFlink: General Discussions
- Topic: Can't control Telldus Ip44 swtich
- Replies: 3
- Views: 4207
Re: Can't control Telldus Ip44 swtich
It would help if someone with a remote could make a log..
- 28 Nov 2018, 09:42
- Forum: RFLink: Nederlands support forum
- Topic: Brennenstuhl Comfort-Line 1507050 draadloze schakelaars
- Replies: 2
- Views: 10702
Re: Brennenstuhl Comfort-Line 1507050 draadloze schakelaars
Klopt, er is geen zend functie aanwezig in de pluggen..
dus druk je de knop dan kan er nooit terugmelding zijn naar rflink/domoticz enz.
dus druk je de knop dan kan er nooit terugmelding zijn naar rflink/domoticz enz.
- 25 Nov 2018, 20:00
- Forum: RFLink: Development and announcements
- Topic: RFLink-ESP
- Replies: 2
- Views: 12239
Re: RFLink-ESP
Various elements are in progress but we are not ready for a release yet
- 05 Nov 2018, 15:03
- Forum: RFlink: General Discussions
- Topic: Arduino 433MHz library for sending data to rflink
- Replies: 3
- Views: 5452
Re: Arduino 433MHz library for sending data to rflink
There are various solutions. The main rule is that you need to use a solution that transmits data in a format RFLink understands. A good start is probably to use something like this: https://github.com/deberman/OS_V2.1_temp-hum_sensor Thdere are many more solutions out there. It all depends on what ...
- 26 Oct 2018, 13:06
- Forum: RFLink: Unsupported devices
- Topic: Profalux, Reception okay, how to issue an RF command
- Replies: 4
- Views: 6239
Re: Profalux, Reception okay, how to issue an RF command
Yes, you can use rflink to push the buttons
Use the mini gpio function and connect the io pins to the remote...
Alternative is that you hack the remote and extract the keyloq key
Use the mini gpio function and connect the io pins to the remote...
Alternative is that you hack the remote and extract the keyloq key
- 22 Oct 2018, 11:56
- Forum: RFLink: Hardware Related discussions
- Topic: RFLink with CC1101
- Replies: 3
- Views: 14103
Re: RFLink with CC1101
On the link posted earlier there are alternatives for the Aurel transceiver.. Using an RXB6 you can build the full thing (including Arduino Mega and NRF) for less than 10 euro's! There is no priority for CC1101 support. I rather have more devices supported and add more powerfull modules than a CC1101.
- 21 Oct 2018, 23:14
- Forum: RFLink: Unsupported devices
- Topic: Profalux, Reception okay, how to issue an RF command
- Replies: 4
- Views: 6239
- 20 Oct 2018, 09:48
- Forum: RFLink: Hardware Related discussions
- Topic: RFLink with CC1101
- Replies: 3
- Views: 14103
Re: RFLink with CC1101
The supported hardware is listed on this page: http://www.rflink.nl/blog2/wiring
There is no mention of and no support for the CC1101 at this time.
There is no mention of and no support for the CC1101 at this time.
- 20 Oct 2018, 09:47
- Forum: RFLink: Development and announcements
- Topic: Advice for 868Mhz RFLink
- Replies: 4
- Views: 14355
Re: Advice for 868Mhz RFLink
The supported hardware is listed on this page: http://www.rflink.nl/blog2/wiring
- 18 Oct 2018, 08:41
- Forum: RFLink: Development and announcements
- Topic: Advice for 868Mhz RFLink
- Replies: 4
- Views: 14355
Re: Advice for 868Mhz RFLink
Yes.
No.
- 11 Oct 2018, 17:45
- Forum: RFLink: Hardware Related discussions
- Topic: RFLink and CC2500
- Replies: 3
- Views: 12142
Re: RFLink and CC2500
You need to enable ansluta.. if it detects the cc2500 all is fine, if it gives an error message then the cc2500 is not responding as expected.
Enabling is done with the rflink loader..
Enabling is done with the rflink loader..
- 01 Oct 2018, 11:27
- Forum: RFLink: Unsupported devices
- Topic: Rflink 868Mhz sensor unsupported
- Replies: 1
- Views: 4175
Re: Rflink 868Mhz sensor unsupported
Here you can find the list of devices that are known to be working: http://www.rflink.nl/blog2/devlist If your device is not on that list, it might or might not be supported. The only way to know for sure is test.. If you do not receive any data at all in a test, it is not supported due to a differe...
- 29 Aug 2018, 00:35
- Forum: RFlink: General Discussions
- Topic: TFA Sinus wind sensor (Cresta) reports mph not km/h
- Replies: 7
- Views: 9577
Re: TFA Sinus wind sensor (Cresta) reports mph not km/h
I will re-measure with my device..
- 28 Aug 2018, 20:37
- Forum: RFLink: Development and announcements
- Topic: RFLink R48 available
- Replies: 20
- Views: 34464
Re: RFLink R48 available
Wiping the post is the worst way of dealing with new development in my opinion. Releasing under the RFlink name and posting about it in the announcements forum is in my opinion disrespectful. If anyone wants to change my mind or tell me I am an ass then do so via PM or email.. (frankzirrone@gmail.c...
- 24 Aug 2018, 14:38
- Forum: RFLink: Development and announcements
- Topic: RFLink R48 available
- Replies: 20
- Views: 34464
Re: RFLink R48 available
It has nothing to do with liking or disliking open source. Alternative versions makes development much harder for us due to unknown/unwanted changes in the code affecting timing etc. So it is more like quality control. It is one of the reasons we put a limitation on the distribution of the source co...
- 22 Aug 2018, 19:59
- Forum: RFLink: Development and announcements
- Topic: RFLink R48 available
- Replies: 20
- Views: 34464
Re: RFLink R48 available
The framework is open-source and thus available, it is all you need for plugin development.
However, the number of contributions can be counted on one hand. This obviously means there is no need for it.
The full sources are semi public, those who need it have access to it.
However, the number of contributions can be counted on one hand. This obviously means there is no need for it.
The full sources are semi public, those who need it have access to it.
- 21 Aug 2018, 14:27
- Forum: RFLink: Development and announcements
- Topic: RFLink R48 available
- Replies: 20
- Views: 34464
Re: RFLink R48 available
Asked and answered before.. there will be updates when needed.
In the mean time we are improving and testing the code.
In the mean time we are improving and testing the code.
- 09 Aug 2018, 16:46
- Forum: RFLink: French support forum
- Topic: [RESOLU] RFLINK Problème création manuelle de télécommande
- Replies: 5
- Views: 14639
Re: [RESOLU] RFLINK Problème création manuelle de télécommande
You can also try the rffind option..
http://www.rflink.nl/blog2/faq#RFFind
http://www.rflink.nl/blog2/faq#RFFind
- 09 Aug 2018, 15:51
- Forum: RFLink: French support forum
- Topic: [RESOLU] RFLINK Problème création manuelle de télécommande
- Replies: 5
- Views: 14639
- 05 Aug 2018, 10:07
- Forum: RFlink: General Discussions
- Topic: Is RFlink still supported?
- Replies: 3
- Views: 5196
Re: Is RFlink still supported?
Yes it is.. we have thousands of requests so it takes time..
- 03 Aug 2018, 09:21
- Forum: RFLink: Hardware Related discussions
- Topic: Does RF Link support CC2530 and CC1101
- Replies: 3
- Views: 12397
- 26 Jul 2018, 08:33
- Forum: RFlink: General Discussions
- Topic: RFLink, data collection, in Windows
- Replies: 2
- Views: 3413
Re: RFLink, data collection, in Windows
Did you check out Domoticz?
You can run it on Windows and it uses mysql
You can run it on Windows and it uses mysql
- 26 Jun 2018, 16:27
- Forum: RFLink: Unsupported devices
- Topic: Basic wall plugs with codes like 12345ABCDE
- Replies: 5
- Views: 5645
Re: Basic wall plugs with codes like 12345ABCDE
You can make pretty much any code you want with the RFFind option.
Alternatively it is possible to extend the RFlink code, but so far noone needed it and noone bothered to send any debug logs or other info.
Alternatively it is possible to extend the RFlink code, but so far noone needed it and noone bothered to send any debug logs or other info.
- 26 Jun 2018, 12:03
- Forum: RFLink: Unsupported devices
- Topic: Basic wall plugs with codes like 12345ABCDE
- Replies: 5
- Views: 5645
Re: Basic wall plugs with codes like 12345ABCDE
looks like buttons a,b,c,d,e are corresponding to switch numbers 1,2,3,4,5
- 26 Jun 2018, 09:44
- Forum: RFLink: Unsupported devices
- Topic: Basic wall plugs with codes like 12345ABCDE
- Replies: 5
- Views: 5645
Re: Basic wall plugs with codes like 12345ABCDE
reverse the dip setting / bits
eg. 00111 becomes 11100
take that as binary and turn into hexadecimal (in this case 0x1c)
and add 0x41 (0x41+ 0x1c = 0x5d)
eg. 00111 becomes 11100
take that as binary and turn into hexadecimal (in this case 0x1c)
and add 0x41 (0x41+ 0x1c = 0x5d)
- 13 Jun 2018, 00:50
- Forum: RFlink: General Discussions
- Topic: Door Sensor sends ON/ON instead of ON/OFF
- Replies: 4
- Views: 5055
Re: Door Sensor sends ON/ON instead of ON/OFF
Try the rffind option
- 05 Jun 2018, 11:58
- Forum: RFLink: Unsupported devices
- Topic: Window/Door sensors no OFF signal
- Replies: 1
- Views: 3088
Re: Window/Door sensors no OFF signal
the logged data is corrupted.. (rows are too short..)
make a new debug log and mail that to me.
make a new debug log and mail that to me.
- 02 Jun 2018, 12:13
- Forum: RFLink: Unsupported devices
- Topic: Somfy Soliris Sensor RTS (sun + wind + rain) and Eolis 3D sensor
- Replies: 3
- Views: 5107
Re: Somfy Soliris Sensor RTS (sun + wind + rain) and Eolis 3D sensor
Most of it should be implemented and working.
If you experience any issues just make a debug log and mail that to me.
If you experience any issues just make a debug log and mail that to me.
- 28 May 2018, 17:40
- Forum: RFLink: Hardware Related discussions
- Topic: ev1527 on and off commands
- Replies: 2
- Views: 10481
Re: ev1527 on and off commands
This is not really useful for home automation systems since you will never know what state the device is in.
There are plenty of others that have proper distinctive ON and OFF commands.
You should probably tell others what set it is so that people can stay away from it.
There are plenty of others that have proper distinctive ON and OFF commands.
You should probably tell others what set it is so that people can stay away from it.
- 26 May 2018, 01:02
- Forum: RFLink: Development and announcements
- Topic: RFLink R48 available
- Replies: 20
- Views: 34464
Re: RFLink R48 available
We are still working on it.. just not going crazy with releases.
- 23 May 2018, 09:01
- Forum: RFlink: General Discussions
- Topic: Aurel 868 FSK/OOK
- Replies: 2
- Views: 3414
Re: Aurel 868 FSK/OOK
No, will not work.
- 06 May 2018, 16:03
- Forum: RFlink: General Discussions
- Topic: X2D/X3D Protocol
- Replies: 2
- Views: 4100
Re: X2D/X3D Protocol
We have addded support for a bunch of models that have been tested so far..
we dont know yet if any model will work.
Time and testing will tell.
we dont know yet if any model will work.
Time and testing will tell.
- 06 May 2018, 12:45
- Forum: RFlink: General Discussions
- Topic: Philips SBC Wallsockets
- Replies: 3
- Views: 4894
Re: Philips SBC Wallsockets
They should be detected but you can also use the rffind feature to learn them
- 30 Apr 2018, 12:44
- Forum: RFLink: Hardware Related discussions
- Topic: Issue Pairing RTS
- Replies: 7
- Views: 16229
Re: Issue Pairing RTS
Make a debug log of your original remote..
Push the up/down/my buttons
Put the debug data in a mail to me (frankzirrone@gmail.com)
Push the up/down/my buttons
Put the debug data in a mail to me (frankzirrone@gmail.com)
- 30 Apr 2018, 11:51
- Forum: RFLink: Hardware Related discussions
- Topic: Issue Pairing RTS
- Replies: 7
- Views: 16229
Re: Issue Pairing RTS
Just retry..?
- 26 Apr 2018, 10:35
- Forum: RFLink: Hardware Related discussions
- Topic: Direct powering of RXB6 possible?
- Replies: 2
- Views: 11309
Re: Direct powering of RXB6 possible?
The normal operation is that the RFlink code cuts power from the receiver and powers up the transmitter when it is transmitting signals over RF.
However, you can also power the receiver directly and permanently.
However, you can also power the receiver directly and permanently.
- 12 Apr 2018, 15:38
- Forum: RFLink: Nederlands support forum
- Topic: NES als RFlink
- Replies: 7
- Views: 14356
Re: NES als RFlink
RTS werkt met een rolling code (die bij ieder commando veranderd). Die code word na de pairing met de ontvanger opgeslagen in het interne geheugen van de rflink en daarna bijgehouden. Door RTS clean te doen wis je die rolling code en kan je daarna niet bedienen. Opnieuw de pairing doen met dezelfde ...
- 12 Apr 2018, 09:37
- Forum: RFLink: Nederlands support forum
- Topic: NES als RFlink
- Replies: 7
- Views: 14356
Re: NES als RFlink
Nee hoor.. voorlopig doe je het zelf verkeerd.. dus er is nog niets te zeggen over de hardware
10;RTS;0100DD;0412;4;PAIR;
de 0100DD is een adres ..
10;RTS;0100FF;0;DOWN;
0100FF is een ander adres..
maw, je zegt tegen de RTS ontvanger dat je adres 0100DD bent..
en gaat vervolgens 0100FF gebruiken..
10;RTS;0100DD;0412;4;PAIR;
de 0100DD is een adres ..
10;RTS;0100FF;0;DOWN;
0100FF is een ander adres..
maw, je zegt tegen de RTS ontvanger dat je adres 0100DD bent..
en gaat vervolgens 0100FF gebruiken..
- 10 Apr 2018, 23:54
- Forum: RFLink: Unsupported devices
- Topic: Rflink 868 + Delta Dore X2D Tyxia 253 remote & Tyxia 4630 receivers
- Replies: 23
- Views: 20026
Re: Rflink 868 + Delta Dore X2D Tyxia 253 remote & Tyxia 4630 receivers
Association (Pairing) mode is already supported for some X2D models.. We are working on others.
- 09 Apr 2018, 08:47
- Forum: RFLink: Nederlands support forum
- Topic: NES als RFlink
- Replies: 7
- Views: 14356
Re: NES als RFlink
Nee, je moet hem echt inleren bij de rts ontvanger.. dit doe je op dezelfde manier als met een rts remote.. dus o.a. de stappen in de handleiding volgen.
- 08 Apr 2018, 23:40
- Forum: RFlink: General Discussions
- Topic: RFLink "pong" message?
- Replies: 4
- Views: 4980
Re: RFLink "pong" message?
There is a ping/pong mecahnism that Domoticz will use to see if RFlink is still alive.. This is only done when there is no other communication for some time. If this is your summer house and it would normally receive a temperature sensor.. it is possible that the sensor died (batteries) and that rfl...
- 08 Apr 2018, 23:36
- Forum: RFLink: Nederlands support forum
- Topic: NES als RFlink
- Replies: 7
- Views: 14356
Re: NES als RFlink
Wil je RTS gebruiken moet je RFLink met je ontvanger pairen.
staat her en der uitgebreide uitleg..
staat her en der uitgebreide uitleg..
- 06 Apr 2018, 17:31
- Forum: RFlink: General Discussions
- Topic: No TX RFlink > troubleshooting
- Replies: 3
- Views: 4757
Re: No TX RFlink > troubleshooting
Upon receival of signals it will display:
20;03;NewKaku;ID=0136e71e;SWITCH=1;CMD=ON;
to send a command manually you need to use
10;NewKaku;0136e71e;1;ON;
20;03;NewKaku;ID=0136e71e;SWITCH=1;CMD=ON;
to send a command manually you need to use
10;NewKaku;0136e71e;1;ON;
- 18 Mar 2018, 23:06
- Forum: RFLink: Hardware Related discussions
- Topic: Unreliable switch control by event system and RFlink
- Replies: 2
- Views: 11341
Re: Unreliable switch control by event system and RFlink
The problem is probably the PIR. The obvious part is that when a PIR detects motion it sends a signal. However, less known is that there are various PIR's and also door/window contacts that repeat this signal for a duration up to 5 seconds. During that time the frequency is occupied and thus blocked...
- 12 Mar 2018, 13:03
- Forum: RFlink: General Discussions
- Topic: Meiantec 868Mhz devices
- Replies: 6
- Views: 10281
Re: Meiantec 868Mhz devices
Make a debug log and send that to me..
Here are instructions on how to do that:
http://www.rflink.nl/blog2/development
Here are instructions on how to do that:
http://www.rflink.nl/blog2/development