Let's Control It

enesbcs

I just installed RPIEASY, the Senseair option in the device tabs seems to be missing. Is there a way I could add it? I am very sorry, but RPIEasy is not ESPEasy. There are a lot of plugins which ESPEasy supports but RPIEasy not, and a lot of that RPIEasy supports but ESPEasy not. I guess you can us...

enesbcs

But I have a problem: I can't open the Hardware tab! When I click on it, the browser waits (with the little circle running for loading) but I never get the display of the tab. (Chrome/Firefox or edge) Is there a solution to get the tab open ? Did you run RPIEasy as root? Did you installed GPIO at d...

enesbcs

From v2.0.330 the SPI connected RC522 RFID reader is now supported. On the other hand, SPI device ID is now stored inside plugin variables, which may brake earlier MCP3008 tasks, please modify these or recreate in case of errors.

enesbcs

Be advised as from today build 2.0.298 the handling of EVERY I2C plugin is a bit different, to support multiple I2C lines in the future. Backup before upgrade, in case of errors either try to recreate I2C devices in RPIEasy and restart, or fallback to previous release: https://github.com/enesbcs/rpi...

enesbcs

Yep, 10.x.x.x is not routable address range. But if anybody get into your network, for example with a help of a cloud-enabled hacked IP camera, than will have a good idea where is your server... But it is unlikely.

enesbcs

I have no idea why this is happening but again my (ethernet) network does not seem to work correct. 19:23:00 MQTT controller: xx.0.0.xxx:xxxx connection failed [Errno 101] Network is unreachable At least there are no active network connection available when RPIEasy starting. Maybe the dhcp process ...

enesbcs

Its 2020 now and uPyEasy is still very quiet.

In case anybody wants to experiment with micropython and ESP32, i've backported partially the Python3 based RPIEasy. Very experimental.

https://github.com/enesbcs/mpyeasy

enesbcs

2stimpy wrote: ↑15 Oct 2020, 19:43 Isn't it strange that it is starting the webserver after it tries to connect to the network?

There is nothing strange in the starting of the webserver, as it is unconditional.
Is it wifi connection? Ethernet is connected or not? Which Raspbian release?

enesbcs

18:31:35 Event: GenMQTT#Disconnected 18:31:35 MQTT controller: xx.0.0.xxx:xxxx:1883 connection failed [Errno 101] Network is unreachable 18:31:35 Event: Network#Disconnected Here is a log after a restart. MQTT is not connected at first, only after pushing the toggle it will connect. Strange, have t...

enesbcs

2stimpy wrote: ↑14 Oct 2020, 20:34 Maybe there is a rule to send the current state to the state topic on rpi start.

RPIEasy updated.
Please add debug log lines next time, when you have questions about how RPIEasy works.

enesbcs

If I reboot the system, I first have to use the toggle switch in the webif before the relay starts reacting to the set topic. It is working for me even after reboot. Somehow the state of the value may be out of sync with the real value.. or you are just sending the same state as it can be seen in t...

enesbcs

P029 option added for status reporting for non-Domoticz systems.
https://github.com/enesbcs/rpieasy/issues/176

enesbcs

On relais#hek do if [relais#hek]=1 gpio,15,1 publish,RPIEasy/relais/hek/state,1 else gpio,15,0 publish,RPIEasy/relais/hek/state,0 endif endon It does report to that state topic, but on one switch moment I get over a thousand messages. Sure, you have just made a recursive endless loop, if relais#hek...

enesbcs

2stimpy wrote: ↑12 Oct 2020, 20:25 Maybe i could also use rules to report to the correct topic?

Yes rules and publish command is supported in rpieasy.

enesbcs

I managed to get it working bij using the set topic as the state topic. I don't think this is the right way but it works. Indeed, it is not a very good solution. Maybe i can add a new option to P029 plugin for non-Domoticz systems to report back. Now I have to figure out how to automatically switch...

enesbcs

If I press the toggle button in the web interface, the relay switches like it should, and it reports a state message. Local toggle button is for testing purposes, it is reporting back. But if I publish to the set topic, the relay switches, but does nor report back a state on the state topic. If you...

enesbcs

Tell me what is the PID controller?

enesbcs

Now I can start to make the connections to control my gate wired. I tried different wireless approaches but in the end they all fail once in a while. I am using ESP8266 with an extra antenna to open the main gate: https://bitekmindenhol.blog.hu/2020/02/16/wifi-s_kapunyito_diy A pure 3VDC and passiv...

enesbcs

The only question is how to manage it? Can be controlled by url commands, as documented in header: https://github.com/enesbcs/rpieasy/blob/master/_P038_NeoPixel.py This is the same way as ESPEasy works: https://www.letscontrolit.com/forum/viewtopic.php?t=3919 https://www.letscontrolit.com/forum/vie...

enesbcs

Not sure how much current can be sourced from a GPIO pin on the R'pi, but maybe it is more safe to use a transistor anyway? Also make sure to place a diode "antiparallel" over the relais coil to protect the electronics driving the coil. Just the first hit on Google regarding "relais ...

enesbcs

That must be it, I indeed have a 5v relay. I ordered a 3 volt one right away and will try that. You can use your 5V relay by adding 4 pieces of passive parts between the RPI and the 5V relay: https://m.blog.hu/bi/bitekmindenhol/image/rele.jpg https://m.blog.hu/bi/bitekmindenhol/image/panel1_jpg.jpg...

enesbcs

Having rpi zero in the living room, I would also like to control it with an addressable led strip. Can it be done with the use of rpieasa? If the addressable LED strip is a WS2812 than yes the P038 Neopixel plugin is designed to control that. But of course the LED strip will need a separated 5V pow...

enesbcs

But now I would like to control a relay which I wired to the gpio15. ... The relay got power from the 1st pin with the 3rd ground pin. The red light is on. I guess you are trying to use an 5V relay with a 3.3V GPIO, which will not work. If VDD=5V than High level needs to be 0.7 x VDD = 3.5V, check ...

enesbcs

fresnoboy wrote: ↑01 Sep 2020, 22:41 It's a little hard to tell from the github repository which version will run on the the LC Tech relays...

Serial MCU plugin is now included in ESPEasy TESTING releases.
https://github.com/letscontrolit/ESPEasy/releases

enesbcs

budman1758 wrote: ↑08 Aug 2020, 19:38 Thanks. Was using "taskvalueset,2,1" instead of "taskvalueset,2,1,1"

It also happens me sometimes.

I guess taskvalueset can be enhanced to work on first value, if only two parameters added, but i was lazy to implement it.

enesbcs

It is designed to be as simple as possible. If the Run OS task has a value of 0 it will run the command at the Line 0, if the task has value 1 it will run command line in Line 1. To change a task value, the "taskvalueset" command is the standard way. Or in newer versions a Toggle button al...

enesbcs · Re: Changelog MCP3008 ADC is now supported through SPI from version 2.0.214

MCP3008 ADC is now supported through SPI from version 2.0.214

enesbcs

From today's version P005_DHT plugin has a new option: Native Python driver can be selected instead of the default Adafruit_DHT lib. In the recent days a Raspbian update caused a new behaviour: RPI4 chipset reports itself as BCM2711. RPIEasy upgraded to support that, but many old software package wi...

enesbcs

Can you tell me how you have it set up on your Pi Zero? Wired direct or what buffer circuit are you using? I did not do anything special, just wired directly clk, dt, + and gnd to RPI. Tested with a similar module: https://www.gmelectronic.com/data/product/1024_1024/pctdetail.775-029.1.jpg Swapping...

enesbcs

If you turn the encoder very slow it will count up or down as it should "most" of the time but still misses steps or sometimes the count will go the opposite direction. If you turn the encoder rapidly it does not count the steps correctly at all. In the rotary plugin i've used event_detec...

enesbcs

17:17:02 File upload started... 17:17:02 'datafile' 17:17:02 Exception while uploading 'datafile' maybe a file permission problem? No, i do not think so. I guess you are using Windows style CRLF line endings in text file, which is also used by integrated Perver web server to split file headers. Sta...

enesbcs

elsalior wrote: ↑10 Jul 2020, 12:14 i'struggling with a password for the AP mode which seem to be different for the bin image ESPEasy_Mega_P165_1M_128kS_lwip20_PUYA.bin
does anyone knows that password ?

Code: Select all

#define DEFAULT_AP_KEY      "configesp"

enesbcs

BertrandP wrote: ↑09 Jun 2020, 09:59 root@RPi0Jardin:/home/pi# python nettest.py
socket opened
socket bind 0.0.0.0:8080
socket closed

It looks fine. I've changed bind in RPIEasy 2.0.161 according to it.

enesbcs

22:16:27: !Webserver can not be started, no available port found! [Errno -2] Name or service not known[Errno -2] Name or service not known[Errno -2] Name or service not known[Errno -2] Name or service not known It is very interesting "name or service not known" error may refer to DNS reso...

enesbcs

FYI: Since RPiEasy is such a rapidly growing project (just wow, considering what you managed in such a short time), we thought it would be good to have a separate sub-forum for it. So I just created it. Please let me know if I messed up the permissions or something else. @enesbcs Keep up the good w...

enesbcs

There is nothing else on the RPI0. it's a proper install from 2020-02-13-raspbian-buster-lite.img I've also tried this Buster edition with an RPI4 and worked well. this is the result for netstat : netstat looks fine, nothing using port 8080 Could you try the latest RPIEasy which updated yesterday f...

enesbcs

root@RPi0Jardin:/home/pi# python nettest.py Traceback (most recent call last): File "nettest.py", line 3, in <module> servers.bind((socket.gethostname(), 8080)) socket.gaierror: [Errno -2] Name or service not known This nettest.py is not relevant anymore. The latest RPIEasy.py are using g...

enesbcs

Yes I can acces to internet, update and upgrate the Pi. Yes the DNS is in my box (french Freebox revolution). I try to delet the forlder and update today from github, but it's the same. Sorry, i think i've found the error, you are using an incompatible old python version: "/usr/lib/python2.7/s...

enesbcs

Is there a more gracefull way of telling RPIEasy to restart rather than using the system reboot? Yes, for example something like that will work (from a bash script), if you are using the default startup run.sh to autostart RPIEasy: curl http://localhost/?cmd=exit If you are using run.sh and killing...

enesbcs

socket.gaierror: [Errno -2] Name or service not known You are somehow using a system that is unable to resolve its own name. I've never seen similar before. https://github.com/pahaz/sshtunnel/issues/56 https://github.com/alessandromaggio/pythonping/issues/28 Can you use internet on this machine? Is...

enesbcs

How install RPI.GPIO ans I2C ? Do I need to install apach or another things ? Every dependency can be installed from inside the RPIEasy plugins&dependencies page. Webserver is provided by the minimal Perver python web server, using only base python libraries. (threading, asyncio, urllib) 17:40:...

enesbcs

The new ESP32 clock:
https://www.tindie.com/products/ttgo/li ... atch-2020/

enesbcs

Is there a way to see the RSSI once a device is declared? Or can it only be seen on the hardware tab during the initial scan? I'd like to figure out, if the new location is an overall better place than the original position. There are a BLE scan device which can scan for online BLE devices - with R...

enesbcs

Thanks for the reply. Actually I tried to set the intervals to 300, 301, 302, ... 305 seconds, but the logs were created with no intervals set. I'll give the new version a try tonight. 1 second between BLE devices is not a good choice, as they sometimes needs 1-5 seconds to connect. Leave 5-10 seco...

enesbcs

Try to upgrade to neweset RPIEasy. A new option "Connect only if BLE local device free" is available, check for all LYWSD03 devices.

enesbcs

After a fresh boot of the pi RPIEasy finds most of the devices, receives data and transmits them to FHEM. After some time FHEM reports that the sensors are absent, not sending data anymore. This can happen after a couple of minutes or after a couple of days - I couldn't find a scheme yet. Neither I...

enesbcs

Just a quick note: from today FTDI USB GPIO&I2C extender is working with RPIEasy. I've never thought before, that i can use an I2C OLED display with my Ubuntu x86 PC directly. :) Still no idea what can i use in a real-world scenario, but it is a possibility now. https://ko-fi.com/rpieasy/gallery...

enesbcs

I want to install a micro IoT in my caravan to collect the data from battery status, water level, gas level, temperatures, power consumption, gps, vehicle levelling a.s.o. Is it possible to use one of the devices as an access point and - if yes - how many devices could connect simultaniously to tha...

enesbcs

Remember that the original UPD messaging (now called P2P) was designed for standalone use for a limited (<10) number of nodes. So you could save money on not having to buy an RPI with a controller. Its origin even goes back to the Nodo project with a wiznet 5100 controller where Arduino Mega's were...

enesbcs

I don't think IANA does want to assign more UDP ports for our protocol just because it does not scale. IANA has no business in my home network. :) But yes, you are right it can be better. Maybe something like the KNX protocol? As i saw it has group properties to its nodes. But KNX is a server based...

Search found 587 matches