Let's Control It

Deennoo

ok thanks, wainting to get it !

Deennoo

rmtucker wrote:Wow That sounds very promising.
Are you saying you have connected an ESP to A Mysensors Arduino ethernet gateway?

Esp8266 use 2.4ghz, mysensors too, i think they just made an esp sketch who spoke mysensors and not wifi...

I'm true ? Where can get some source to try ?

Deennoo

BertB wrote: I still think making an output device is the simplest way to overcome this problem, since it allows for presetting a pin to 0 at boot.

+1 !

Testing a mysensors sketch : relay + button is the best way to drive a light.

Deennoo

Mine are on on toll aéroport, Christmas time, toll are long

Just read that those are compatible with nodemcu code since 03 Décembre 2015

Deennoo

NietGiftig wrote:Is this the Jeedom you are talking about?
https://market.jeedom.fr/index.php?v=d

Then I will pass it, 95% in french, using open source from other people with payment to include in Jeedom?
But i'm not sure, can't read French

Well done, Your right ! That the true...

Deennoo

Is a chance to run ESPEasy out of the box with this nodemcu "clone"
http://www.wemos.cc/wiki/doku.php?id=en:start

Deennoo

Use mysensors relais + button, ans read mysensors forum to teak it for on/off action

Deennoo

Hi there !

Deennoo

Made some test with mysensors.

Got a sketch who works great d'or listenning button, and act as software Button.
My test,
https://db.tt/uENCuYmi

I hope this will work on mysensors on esp

Deennoo

Hi Guys, Continuons Playing with ESP8266, a new Idéa come to me : Clone Fibaro FGS221. A Wall switch drive a light, putting esp on the way, it give ability to read, driver and update light statut. Actully we can do 3/4 of the job : - drive an output direct from controler - listen an input What missi...

Deennoo

I get a solution without EasyEsp :https://hallard.me/wifinfo/

For domoticz intégration :http://easydomoticz.com/forum/viewtopic.php?f=7&t=843

Deennoo

)Crystal Clear !

Made some advanced test with R42 on ESP01

First got subclient error when compiling (using lib provid with R39), must disable all MQTT entrie.

As Martinus says this not stable enough, and a dedicaced sketch for EasyESP and Ser2net must be set.

Deennoo

Sorry i'm not fluante in english... After more test, when ESP is plug, USB can only recieve sending don't works. @Deennoo. I tend to read carefully, but your remarks did not point out there is an issue regarding interference and possibly (but not likely) even damaging hardware. Just connecting RX to...

Deennoo

@Martinus How did you connect RFLink to the ESP in SER2NET mode? Quite simple, just like you would connect a 5V FTDI to an ESP-01. RX to TX, RX to TX, using some sort of level shifting. As far as I know, RFLink uses only one serial port for communication and that one is connected with the USB devic...

Deennoo

Ser2net on ESPeasy can ne use for this case to :http://www.esp8266.nu/forum/viewtopic.php?f=6&t=84

Using an optocoupler french Elec counter provid his information on a serial format.

Deennoo

What do you mean by "Please add aviablity to set 2 server" ? You mean running two servers on the same ESP module? The ESP has only one serial connection so I think we can use only one serial-tcp bridge. Yes, not really usefull for everybody but for me yes, got a server (10 year old squeez...

Deennoo

Thx for your Job Martinus !

Please add aviablity to set 2 server :

Actually, we can connect 2 clients but only first got serial, second connect but dont have anything.

After more test, when ESP is plug, USB can only recieve sending don't works.

Deennoo

I just finish a RFLink wifi using ser2net on esp8266 sp1 : plug Mega Rx to esp RX, Mega TX to Esp TX, Power On, creat RFLINK gateway with LAN and rock and roll, recieving sending works like USB ! I found a more small skecth to upload on esp8266 : https://github.com/dparnell/esp8266-ser2net I made a ...

Deennoo

This can be usefull to extend 433 range. I'm using RFLink since his beginning, i try to help by testing more and more new plug ins and try to made supports for french people. I'm facing a problèmes : my wind sensor is an Oregon and RFLink can't get it because he is too far (on house roof), i need st...

Deennoo

Hello, bienvenue.

Le fils pilotes va en intéresser plus d'un !

Pilot wire will be intersting to follow

Deennoo

Must admit that sending good % is not easy. Actually can't get a good result because i'm missing 2 characters on formula place to provid a real number to place my formula who was give by a friend, 100-(%value%-66)*2 : must be 1024-((%value%-660)*2)/10 My tweak is to divid analogic input/10 (line 43 ...

Deennoo

Got a Good result ! and solve my probleme ! using Json to update Domoticz Humidity device must be : http://ip:port/json.htm?type=command&param=udevice&idx=IDX&nvalue=HUMVALUE&svalue=HUM;HUM_STAT http://ip:port/json.htm?type=command&param=udevice&idx=IDX&nvalue=HUMVALUE&am...

Deennoo

does it can be the same way to send analog value to a domoticz mqtt ?

Deennoo

as i read here : http://gardenbot.org/howTo/soilMoisture/

To reduce electrolise just power sensor when we need to read value, for a rain sensor, by using barometric pressur ?

Deennoo

finally got good analog value by plug the sensor to the good esp PIN (ADC).

Probleme is still the same, as i can choose which style of device to use for update sending.

Deennoo

Ok Thanks for this help, i just figure that ESP GPIO works like Arduino One...

When VCC on 3.3v this sensors return analog on 3.3v, i made a div bridge and now get 1.1v when sensor is on the air and 0.574v when is on water, is this more ESP8266 compiliant ?

Deennoo

After some test, value on Analog aren't good, put it on water or on Air will give the same value...

I test it on a anrduino skecth who ready analog value, and sensor looks good :

1024 : on dry sand
250 : on full water

Can you help ?

Deennoo

Just recieve this : http://www.google.fr/imgres?imgurl=http%3A%2F%2Fbeavereye.com%2Fwp-content%2Fuploads%2F2015%2F09%2FSoil-Moisture-sensor2.jpg&imgrefurl=http%3A%2F%2Fbeavereye.com%2Fproduct%2Fsoil-moisture-sensor%2F&h=378&w=440&tbnid=Y0OvSEUo4r9qnM%3A&docid=tk28rZTQ93ZoRM&e...

Deennoo

For the moment i only use the Digital pin, who works like a switch (didn't try to pass without electronic for the moment) looks like this : http://www.ebay.fr/itm/Module-detecteur-capteur-de-pluie-fuite-cables-Dupont-F-F-DIY-Arduino-Pi-/221532414817 This the cheaps one solution but works for moment....

Deennoo

Hi

I just finish a rain sensor with ESPEasy, with the same kind of rain sensor we can find on ebay.

It's run R30 on a SP1 and update Domoticz via http

Set it as a reversed switch with pull up.

[attachment=0]rain sensor.JPG[/attachment]

Now waiting for real rain.

Deennoo

I can be your tester !

Deennoo

It works using 10k resistor and a brand new esp8266 sp1 chip. ds18b20 is the same parts. When i try to update or load previous EspEasy skecth on a chip who already got one, all data aren't erase and DS18b20 port doesn't seams to be update. See port on my previous post and now look at this : Capture....

Deennoo

I'm testing this on a breadboard with a 4,7k as recommanded.

Test 6 différentes sensors, always the same result.

Will try with a 10k

Deennoo

BJust try to use DS18B20 with R34 on SP1, and i'm facing a problem. Wired as shown on the wiki, i get this : Capture.JPG on serial got this : INIT : Booting Build nr:34 WIFI : Connecting... INIT : I2C INIT : Boot OK INIT : RTC not read WD : Uptime 0 ConnectFailures 0 FreeMem 30768 DS : Temperature: ...

Deennoo

Just flashing some ESP for My project, and some off them have to connect to a different SSID, where it's difficulte to know which device are connected and there IP.

Is this possible to show IP on serial once module is connected ?

Deennoo

Maybe will be not the first but test this this morning. Looks to works, thanks to add the debounce delay !! on a gas counter gaz case 1000ms (1 seconde is enough). Thank you Martinus, Next step Add a pulse counter to my Water Meter with this hall round sensor (the only one i can put and who work on ...

Deennoo

I just upload r29, samething

Great news thank you very much !

Will be the first to test !

Deennoo

7 days my easyesp deep sleep dht22 run with r20.

Internal clock is not a swiss one, but job is done very well.

: chart.jpeg (57.46 KiB) Viewed 44798 times

I can says it's works !

Thanks Martinus !

Next step, add luxsensor ans soilmoisture sensor to monitor my tomato.

Deennoo

Hello Jean Claude

Deennoo

I'm back with this. Still working on r20 Got a bounce problem using a Reed switch on my gas meter. Reed switch is hoock to gpio 2 and gnd. Capacitor is on this line too The same reed with a 433 chinese pir sensor don't do this. Is there a way to fix this ? Juste by adding rules that 2 plus can't be ...

Deennoo

French elec counter is know as smart p1 counter

Deennoo

I found a french guys who already made this kind of job
https://hallard.me/wifinfo/

Does it help ?

Deennoo

Just recieve some ep12 today and start test with deep sleep solar powered running R20, sensor is a DHT22 runing on 3.3v Solar system is a 3*1.2/600mah batterie come from a Solar PIR LED light, solar panel deliver 3.7v outside.JPG inside.JPG System is uploading every 60 minutes with deepsleep enable ...

Deennoo

was done 2 time...and now with 3 try it works

Deennoo

Just download it from github this give r25. and try to update esp8266 sp1 with it Admiting that i'm not an arduino and esp8266 player got some error. looks like r25 doesn't call other *.ino files : r25.JPG and got this full error : Arduino : 1.6.5 (Windows 8.1), Carte : "NodeMCU 1.0 (ESP-12E Mo...

Deennoo

In france we got some specifique french counter. we can get ll information by using serial connection and a SH620 a light relay switch. [...] It does looks like Easyesp can't does this is this plan ? I am pretty sure you can use the counter feature and connect the optocoupler to the ESP8266, like i...

Deennoo

Hello, In france we got some specifique french counter. we can get ll information by using serial connection and a SH620 a light relay switch. In domoticz we must use : TeleInfo edf USB device. all exemple found will be in french of course. Once here : 5 Way of work : 1 - Buy an expensive serial ada...

Deennoo

just upload r20 on sp1.

Seen the sleep mode, i mark it, and i set time on Sensor delay ?, until i clik on submit that should be all ? easy as this ?

Deennoo

Ok thx, will try that.

I Just finish soldering gpio16 and resest on one of my sp1, not easy at all !

Deennoo

Forget about pulse counter, i have found a way to get constant 3.3v When you says "deep sleep need software change" Did a code like this one can be use easly : https://www.sparkfun.com/news/1842 This can be usefull for soil moisture sensor and ds18b20, solar powered (parrot flower power li...

Search found 158 matches