Let's Control It

Deennoo

Maybe ESPEasy have to simple reach the goal to be a Sensors FW and not a Lighting FW...

Deennoo

Still waiting my h801 grrrr

Deennoo

Nordix, found a solution on his Jeedom :

- he had to send 3 time the same order to make it works, this trick looks working a 100%, maybe this a Livolo spec

Deennoo

I found on github an ESP firmware who turn it on a Milight bridge + ledstrip controller for pwm led strip. I test everything looks OK https://github.com/frizzby/esp8266-rgb-led I'm starting a conversion for Ws2812b led strip , any thoughts? i got it starting : https://github.com/deennoo/esp8266-rgb...

Deennoo

Can be, to try

Deennoo

Hello, Maybe it can be a good idea to made this kind of Post, to make the devices list up to date. Only for product who aren't on the list and who are perfectly reconize without trick and add work. Following this kind of form : Brand & ref Url link to the product Rf Band, Software and protocole ...

Deennoo

cherowley wrote:
I have written the plugin and am using it. Only supports the named protocols, not raw mode at the moment..

Panasonic & Samsung ?

Deennoo

I'm back with new battery and a real TSOP4838 (on previous test i use a HSIR38S2 stolen from an old hifi parts)...

Have to admit that it is really better, but sometime false code still appear.

Deennoo

OK will try.

But i don't have any problème with LIRC.

Deennoo

Made some test with ans without box, and with 2 differents IR reciever results are the same, to much false code to be usable.

Maybe a learning méthode have to be done like LIRC do (only the first part), just to reconize which protocole have to be use.

Deennoo

costo wrote:Not much chance to get this implemented in ESPEasy.
It would need an huge library of devices and commands.
Memory limitations I'm afraid.

IR lib is already on Esp Easy.

Deennoo

Can be usefull for amp without HDMI cec, who need to be set ON when TV plug is set on.

Best of this will be a MQTT payload with hex code on it, this way IR sender is just a sender all HEX code are on domoticz device.

Deennoo

+1 can be away to send IR command

Deennoo

I'm on it to, will try on a box, because openspace rive lot of flase code.

Deennoo

OK for recieve it works, but with some probleme as : false code, or difficulity to get always the same But what about to send ? Does someone works about ? Got an exemple from a french guys who made ils how setup : http://sebastien.warin.fr/2015/11/10/3745-controlez-votre-maison-avec-la-telecommande-...

Deennoo

Hum....no
PI Zéro + wifi dongle + sd card + led board.....to much marerial for my project

Deennoo

With Domoticz, on device mode (under hardware section) select rgbw. But : Have you made the change on milight.lua file to make it run for rgbw order ? (http://www.limitlessled.com/dev/) ? They are not the same as the one on the initial file. Have you made the change to add a pwm channel for white ? ...

Deennoo

60 min later i'm back, and please to say that Sticilface made a great job ! Of course that a bit slower on running effect, but impressive, it made all that i plan to do....and i will take 3 years to made it... Actually i run it on a Wemos mini d1 + 15 pixel direct plug on it (5v gnd and data) and us...

Deennoo

Of course...need to be upgrade to h801 material spec :

- switch command from milight RGB to rgbw, to allow white channel control.

Ordre mine today...waiting for it on march now

Deennoo

Again thx for source will try it too !

Milight API ils quite easy to understand, but for a newbie on arduino sketch programming...not so easy to add.

But will try.

Deennoo

Once your upload is down did you remove gpio0 from gnd ?

As Martinus already say by the past, the price differences between an esp12e nude and a dev board like nodemcu or wemos is so minime, and you win a lot of comfort with.

Deennoo

would be very intered in your solar setup... :D may you show a picture, components (links for aliexpress? :D ), cabling-diagram? great thanks, tozett Nothing special on it : Solar panel and batterie come from a lidl garden lamp Just don't forget to wire the deepsleep pin to gnd. some info here (fre...

Deennoo

Following this french forum :

http://easydomoticz.com/forum/viewtopic.php?f=7&t=1507

You ll have a exemple using ESPEasy and a saintsmart relay board

Deennoo

Nice ! Thx

Deennoo

i don't know... as it looks like to be direct connect to the USB line, can expect thas this delivery the same as usb input.

Deennoo

On my side : Dont want ans cant't put long led strip. I already got some ws2801 and now ws2812b juste want to recycle them (fedup buying again and again). Easy to powerup : only 5v and my max pixel number will be 30 pcs. My wemos who provid 5v direct from USB can accepte them easily Got 1 wemos + 15...

Deennoo

Look at wemos mini d1 : this is an esp board on the same seize of an SD Card, working on 5v true USB, lot of gpio aviable, all inside and got a 5v output direct from USB plug.

http://www.wemos.cc/wiki/doku.php?id=en:d1_mini

Deennoo

i can't of course will try this app (offical one who i use doesn't allow more than 6 bulb/group, because of firmware bad reconizion i think).

does this group is well reconize by domoticz ?

Deennoo

On my side i'm looking for a way to drive all the led strip as a single bulb with huebridge sketch
Do you have an idea Ger?

Still for Ger, i start the same project as you need and get some cool résult :

https://github.com/deennoo/ESP8266-ws2812b

Use master sketch and have fun

Deennoo

on my side i found a great nodemcu app : This create a milight wifi rgb led strip controler. https://github.com/frizzby/esp8266-rgb-led i run it on a wemos mini d1 and just a led plug on gpio0 + gnd this made for a "classic" led strip. Maybe some one can test it on this hardware H801 Hardw...

Deennoo

there a really good sketch easy to understand and easy to build here :

http://pance.mk/index.php/wifi-light-wi ... uino-code/

It make run all the pixel to the same color, webinterface controled and well documented.

Deennoo

i had some clearance of the flash with R076, it think. the arduino ide showed the end of flashing, but in the serial-monitor the erase was still running a while. check the R07x version? Downgrade to R048, than upgrade to R07x? flash first nodemcu, than flash ESPeasy after? Thanks for tips and thank...

Deennoo

Hi there. Not really an ESPEasy problem but maybe this can arrive to someone. Using nodemcu 12e & Wemos mini d1 on arduino IDE 1.6.5 and esp8266 environnement 2.1.0 rc1 I try some Esp Sketch and now i'm facing a problème : A sketch start to load and run well util it retrive an previous sketch co...

Deennoo

Ger wrote:The message with the conf files is also soved, I flashed them without SPIFFS, with SPIFFS no problem

grrrrr my ws2812b led strip still not here.....

Deennoo

Got one nude ESP12E who run with a 5v solar panel to charge 3*1.2v battery (recycling a garden light)

I test it for a parrot flower clone, actually it run since September, sending 1/h temp, lux, hum, and got back to deepsleep.

Of course i'm a beginner, but it work, great

Deennoo

In the H801 thread is a ESP hue emulator mentioned for WS2812 https://github.com/sticilface/Esp8266-Hue I am experimenting with this bridge and it is working. As far as I can see there are a couple of issues: Philips Hue has a maximum of 63 lamps, the bridge is working with 255 lamps, but the more ...

Deennoo

this one will do the job : http://www.compteur-energie.com/gaz-emetteurs-impulsions-elster-in-z62.htm for my water counter i have to get this one who is the best : http://www.diehl.com/fr/diehl-metering/produits-solutions/pdb-details.html?tx_diehlproducts_pi1%5Bproduct%5D=865688&tx_diehlproducts...

Deennoo

Great !!

Deennoo

Which reed contact did you use ? on my side the one who can be found on a 433 mhz alixepress door sensor who do this job before

On my side i put a 100uf capacitor between each pin very close from the reed switch.

Deennoo

Depending on which usage :

For my pulses counter and temps sensors domoticz send me a notification if value are older than 30 minutes, that mean that there is a problème.

But since i'm using wemos mini d1 board (1 Mounth now) i never get a problème ne past with sp01 it was 1 by week.

Deennoo

My hue bridge is working now :D I have to investigate if there is a maximum of 255 lights. I would like to use it for strips with 300 lights. I have to think about the possibilities and how to use them. I also don't know if this is something to integrate in espeasy. Anyway I am very happy. :D This ...

Deennoo

Have you try with domoticz ? First i set with official iOS philips HUE app (v1.10.2) Bridge is reconize as v 0.1 & modele BSB001 i set only 1 Hue bulb and 1 groupe : reconize as Model LT001 can play with scene : Capture.JPG and after with domoticz. Juste retry with Android and chrome app : fail

Deennoo

see below my config for gaz meter using reed sensor :

: Capture.JPG (80.61 KiB) Viewed 11655 times

Each pulse a for real get with no double get

Deennoo

@Ger :

Before connecting via domoticz, connect to the bridge with IOS App, this will creat .conf files

Deennoo

Many thx for this, great solution for ws2812, unfortunaly i got ws2801who need clock pin

Deennoo

@Ger : no, in fact each esp act as a hue bridge, once you set a ws2812b to gpio2, each pixel can be set as individual lamp or set on a group part. As this, this create 10 hue on domoticz. As i don't have any ws2812b can't test it more, looking for a way to converte it to ws2801 who need clk connecti...

Deennoo

I'm starting this kind of project to : Real Problem is : which kind of RGB strip use : Color power one like this one with 4 wire (R G B Ground), who need triac and other electronic pcs Or Adressable one ? : like WS2801 with SPI and Clock fonction or more easy one like ws2812 who use i2s Found some g...

Deennoo

As now we can great "dummy" rgbw switch on domoticz, does some one already work on a WS2801 led strip with Easyesp ?

Deennoo

Recieve today 5 x Wemos D1 Mini + dht shield

After solding pin, and loading ESPEasy b 58 on It, that run fast ! and looks stable, lets see the futur.

On mini i had to put d3 to gnd to enter on uploading mode.

Deennoo

Just a thought though to keep things simple instead of multiple gateways. Is it not possible to have 1 ESP gateway with multiple ESP nodes? I don't think that the MySensors library currently supports this, or it's an undocumented feature? Maybe you have more information, since I'm totally new on My...

Search found 158 matches