Hi, I am thinking of a quite similar project, water level in freshwater tank in my caravan. I have already ordered this one https://www.aliexpress.com/item/GY521-GY-521-GY-521-MPU-6050-Module-MPU6050-Module-3-Axis-Analog-Gyro-Sensors-3/32276121395.html?spm=a2g0s.9042311.0.0.27424c4dQ4NTx1 to get the...

Hi,

I've just learned, the MCP1703 LDO voltage regulator is definitely the better choice. In comparison to the HT7333 its specs name the half of quiescent current, 2uA instead of 4uA. Thanks for this tip!

Never stop learning!

Hi all, thinking of putting this to the next level. I have some solar panels that, when fully in sunlight, produce 5V. I do have a charger board like the one described above for the battery but as the sunlight drops, the battery is no longer charged. So I was wondering if I could do the following: ...

Hi, I am running outdoors a wemos D1 mini with the ultrasonic distance sensor HC-SR04 and an ina219 monitoring the battery state. Deep sleep 30 mins, one 3000mAh 3,7v battery, this one: https://www.ebay.de/itm/162761356714 as protection and charging circuit, this one: https://www.aliexpress.com/item...

Hi,

publishing from deep sleep works for me on a Wemos D1 with git-version mega-2018-05-06 pretty stable.

Only hints: power drain (might be a hardware issue with my step-up) and publishing after wakeup three times.

...and yes, you're right. In the test binary it is included. Thanks again.

Thanks a lot, I'll try....

Hi,

in the Wiki the sensor MPU6050 resp. gy-521 is explicitly listed as suppoerted.

I cannot find it in the device listing of mega-20180421. Am I blind or is the sensor no more supported?

Hi, thank you for taking care of my problem. I'm an absolute newbie here, pls help. How and where do I open an issue? I would like to do so, as well as testing&reporting everthing you need. Ehm, but what I don't understand, all the versions I have used up to now have had no problems with my WLAN...

Maybe, I'm using DHCP. Due to the fact that I have a fallback WLAN - different IP-range - to guarantee the monitoring its neccessary.

Up to now, four devices with 26.04 working perfect.

Hi, coming from mega-20180413 Iupdated today to mega-20180428. Surprisingly, the connection to an hidden SSID fails. Log says: "noAP found" Three others devices are running on mega-20180413 pretty well. I tried an update, because one one devie I could not set the resolution of the DS18B20 ...

Hi, since yersterday I was playing around with deep sleep, same effect. No data are received from my controller. Wemos D1 mini, 4MB Git-Version mega-20180413 Controller Domoticz Last settings: Deep Sleep setting: sleep awake time 90 sec, sleep delay 1800 sec Device 1: INA219, delay 15 sec Device 2: ...

Hi, I am 59 years old and starting fresh into the IoT. Already running is an ESP32 as a Solar Battery-Surveillance and a Clocktimer for the heating of my house. I've found Easy ESP today and I am pretty impressed about the functionality. Thanks a lot at the busy people woho make this project possible.