Search found 513 matches
- 25 Mar 2018, 15:15
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
>>> upyeasy.main('xxxxxx', 'yyyyyy') Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: function takes 0 positional arguments but 2 were given >>> upyeasy.main("xxxxxx", "yyyyyyy") Traceback (most recent call last): File "<stdin>&quo...
- 25 Mar 2018, 01:31
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
hi, i have tried on both platforms but was not able to get it running. I have no clue to identify why it doesn't work. Installation of firmware obviously worked but I can't reach it via browser. I am concerned by the last line of the protocol (see below): 2000-01-01 00:02:24 [debug] uPyEasy-uPyEasy...
- 24 Mar 2018, 20:48
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Ok, so use this command to flash the firmware: esptool.py --port YYYY write_flash --compress 0x1000 xxxx.bin where YYYY is your comport (unix: /dev/ttyUSBx, windows COMx) and xxxx is your firmware name. Don't specify any other parameters as stated earlier in these post in this topic, but follow the ...
- 24 Mar 2018, 20:41
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Now ... maybe of interest ... When I use this:D:\Program Files>python python\python36\esptool-master\esptool.py --port COM6 write_flash --compress 0x1000 D:\Tools\uPython\upyeasy-esp32\upyeasy_un4096.bin This is the kind of same command as in the very beginning of this item, page 1 I get this: ets ...
- 24 Mar 2018, 20:36
- Forum: uPyEasy: Hardware
- Topic: ESP32 Boards working listing (Yes/No)
- Replies: 6
- Views: 16922
ESP32 Boards working listing (Yes/No)
A list of ESP32 board which are not working for me: - HelTec WIFI kit 32 Problem: Cannot connect to AP (Error: wifi: STA_DISCONNECTED, reason:2) Aliexpres url: https://www.aliexpress.com/item/ESP32-Bluetooth-WIFI-Kit-0-96-inch-Blue-OLED-Display-Module-CP2102-32M-Flash-IOT-Internet/32825725963.html E...
- 24 Mar 2018, 19:12
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
I erased, then flashed with 2048 but no success.... :cry: E:\esp32>esptool.py --port COM7 erase_flash esptool.py v2.3.2-dev Connecting........_ Detecting chip type... ESP32 Chip is ESP32D0WDQ6 (revision 1) Features: WiFi, BT, Dual Core Uploading stub... Running stub... Stub running... Erasing flash...
- 24 Mar 2018, 19:10
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
- 23 Mar 2018, 21:32
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
- 23 Mar 2018, 21:29
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
@karl222 @bertb The errors in your log: File "flashbdev.py", line 13, in readblocks OSError: [Errno 5] EIO means that the flashdrive could not be initialized, so that the database isn't build (no dir) and upyeasy fails. Did you flash the 2048 or the 4096 version? hi, have tried it with bo...
- 23 Mar 2018, 18:18
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
@bertb: and now a reboot and only do: >>> import upyeasy >>> upyeasy.main() Still a network not found error? Ps. Thx! line 46 of utils.py had a bug! It stated db.configTable.update({"timestamp":network['timestamp']},port = wport) But it should have been: db.configTable.update({"timest...
- 23 Mar 2018, 12:49
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy is going NB-IoT!
- Replies: 9
- Views: 19489
uPyEasy is going NB-IoT!
Currently uPyEasy is local only, meaning that it's bound to a single Wifi AP due to it's settings. To make uPyEasy mobile , meaning you can take your device ANYWHERE without changing settings, it's going to support NB-IoT ( https://en.wikipedia.org/wiki/Narrowband_IoT ). Currently i'm talking to T-M...
- 23 Mar 2018, 00:07
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
@karl222 @bertb
The errors in your log:
The errors in your log:
means that the flashdrive could not be initialized, so that the database isn't build (no dir) and upyeasy fails. Did you flash the 2048 or the 4096 version?File "flashbdev.py", line 13, in readblocks
OSError: [Errno 5] EIO
- 22 Mar 2018, 15:48
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Hello, Lisa :) The connection to my router is successful, but when i make request to 192.168.100.3 from my browser it tells me that is unable to connect. This is what I got: I've got ping to 192.168.100.3, but seems web server isn't working. What I'm missing? It's working, cool! The webserver doesn...
- 21 Mar 2018, 23:00
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
It is also impossible to use ampy to upload main.py D:\Program Files\Python\Python36>ampy --port COM6 put D:\Tools\uPython\main.py Traceback (most recent call last): File "d:\program files\python\python36\lib\runpy.py", line 193, in _run_module_as_main "__main__", mod_spec) File...
- 21 Mar 2018, 22:32
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
It is not looping anymore. But now I get this: rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4364 load:0x40078000,len:0 load:0x4...
- 21 Mar 2018, 21:54
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
No, it's my fault. The new binaries in the https://github.com/letscontrolit/uPyEasy/releases section should not have this reboot problem.
- 21 Mar 2018, 21:29
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Hi, karl222! I was able to build and deploy firmware following the instructions. I've little problems, but now seems ok. You can see my post here: http://www.letscontrolit.com/forum/viewtopic.php?f=23&t=3903 I hope this my post helps you. Regards :) The build & deploy doesn't change, it's o...
- 21 Mar 2018, 21:27
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Hi, see my changed remark above: It's a building firmware bug, fixed it! I've uploaded two new versions into the https://github.com/letscontrolit/uPyEas ... s/tag/BETA section, can you download the 4096 version and try it again? If it doesn't work, you can try the 2048 version. esptool.py --chip esp...
- 21 Mar 2018, 20:00
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
it does not go, thats the problem :roll: Found it! It's a building firmware bug, fixed it! I've uploaded two new versions into the https://github.com/letscontrolit/uPyEasy/releases/tag/BETA section, can you download the 4096 version and try it again? If it doesn't work, you can try the 2048 version...
- 20 Mar 2018, 00:43
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Hi all, I have (or had) three ESP32 boards:- 1. Lolin32 Lite: bought from Aliexpress, https://www.aliexpress.com/item/WEMOS-LOLIN32-Lite-V1-0-0-wifi-bluetooth-board-based-ESP-32-esp32-Rev1-MicroPython-4MB/32831394824.html?spm=a2g0s.9042311.0.0.O82kUi Now disconnected, but it had a BME280 and a DS18...
- 18 Mar 2018, 19:20
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
On both boards, the first version of upyeasy works. That's very interesting! The first version was a 4MB version, while later ones are 2MB versions. I've added a 4MB version (upyeasy_v021_20180318_test_esp32_4096.bin) to the release dir: https://github.com/letscontrolit/uPyEasy/releases Can you try...
- 18 Mar 2018, 17:00
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
I've my working setup attached. I'm using this one: https://www.aliexpress.com/item/Official-DOIT-ESP32-Development-Board-WiFi-Bluetooth-Ultra-Low-Power-Consumption-Dual-Core-ESP-32-ESP/32801621054.html Can you post a picture of your setup and a link to where you bought it? I have also these in stoc...
- 18 Mar 2018, 16:34
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
Attached pictures of my config, please adjust your config.
Run
(replace ip-addresses by your own ip, gateway, mask, dns)
Cheers,
Lisa
Run
Code: Select all
upyeasy.setnet(1,'A3','A4','192.168.178.135', '192.168.178.1', '255.255.255.0', '192.168.178.1')
Cheers,
Lisa
- 18 Mar 2018, 16:04
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
Mine is the same part. Some additional info.., I tried the same W5500 with a STM32F103 "Blue Pill" board using one of the example sketches (web server) and it worked fine. Connected to network, no problem connecting from my browser, and it supplied data to my browser, able to ping. In thi...
- 18 Mar 2018, 15:49
- Forum: uPyEasy: Hardware
- Topic: ESP8266 boards
- Replies: 4
- Views: 14277
Re: ESP8266 boards
I'm busy stabilizing the release, the ESP8266 requires some testing due to the limited stack space. 4MB Flash size isn't the problem, it's the stack.
- 18 Mar 2018, 15:46
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
- 17 Mar 2018, 17:08
- Forum: uPyEasy: Software
- Topic: Setting up the uPyEasy build environment
- Replies: 7
- Views: 18414
Re: Setting up the uPyEasy build environment
Version 0.2 of the uPyEasy has been completed, a generic section was added. The unix, stm32,esp8266 and armbian dev environments are added as well. I'm happy the way it looks like, however feedback is welcome!
- 16 Mar 2018, 19:51
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
hi, I was trying to wire up accordingly but couldn't find the nSS pin on the W5500. can someone help me on that... thx karl Hi karl, I had the same issue. In the end, I used the one marked "SCS" on my W5500. It was a process of elimination for me, the others were pretty clear, so that see...
- 16 Mar 2018, 19:51
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
- 10 Mar 2018, 20:10
- Forum: uPyEasy: Software
- Topic: Setting up the uPyEasy build environment
- Replies: 7
- Views: 18414
Re: Setting up the uPyEasy build enviroment
The other ports will be added shortly...
- 06 Mar 2018, 18:12
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy32 or uPYEasy?
- Replies: 8
- Views: 9010
Re: ESPEasy32 or uPYEasy?
What are you going to do with it? Purpose defines solution...
- 20 Feb 2018, 16:15
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 255417
- 18 Feb 2018, 18:56
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy v0.2.1 released
- Replies: 2
- Views: 13040
uPyEasy v0.2.1 released
Fixed issues #3, #11, #14 and #15. (https://github.com/letscontrolit/uPyEas ... s%3Aclosed)
- 15 Feb 2018, 22:52
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
>>> import upyeasy >>> upyeasy.setnet(1,'A4','A3') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "upyeasy/__init__.py", line 23, in setnet File "upyeasy/utils.py", line 30, in setnet File "filedb.py", line 70, in update Attribute...
- 15 Feb 2018, 22:13
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
after >>> upyeasy.setnet(1,'A4','A3')? I get this: >>> upyeasy.setnet(1,'A4','A3') Traceback (most recent call last): File "<stdin>", line 1, in <module> NameError: name 'upyeasy' is not defined >>> Hi Frank, >>> import upyeasy >>> upyeasy.setnet(1,'A4','A3') Cheers, Lisa
- 15 Feb 2018, 21:54
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
So, next try. With these commands I get into the network. The W5500 can also be pinged. >>> import network >>> nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.A4, pyb.Pin.board.A3) >>> print(nic.ifconfig()) ('192.168.0.210', '255.255.255.0', '192.168.0.3', '8.8.8.8') >>> nic.isconnected() True 200...
- 15 Feb 2018, 21:36
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
2015-01-01 00:00:00 [debug] uPyEasy: Hal: pyboard, spi is empty: trying default! after this it locksup Is there a solution??? Hi Frank, Did you wire it according to these instructions? https://www.letscontrolit.com/forum/viewtopic.php?f=22&t=3905 Did you do a >>> upyeasy.setnet(1,'A4','A3')? Ch...
- 10 Feb 2018, 19:35
- Forum: uPyEasy: Software
- Topic: Questions about components of uPyEasy
- Replies: 26
- Views: 33118
Re: Questions about components of uPyEasy
The FileDB database where all uPyEasy data is stored is indeed located on ~/.micropython/lib/upyeasy/config . Each table (entity) is in FileDB a directory under the config dir, for example hardware or config. Each table record is a separate file in this (hardware,config, etc) directory with an uniqu...
- 10 Feb 2018, 19:29
- Forum: uPyEasy: Software
- Topic: Questions about components of uPyEasy
- Replies: 26
- Views: 33118
Re: Questions about components of uPyEasy
1517945318.103 <HTTPRequest object at 7fa4ea795500> <StreamWriter <_socket 27>> OSError(13,) Traceback (most recent call last): File "/home/andrew/.micropython/lib/picoweb/__init__.py", line 186, in _handle File "upyeasy/pages.py", line 1247, in devicesettingpage File "upye...
- 05 Feb 2018, 17:35
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
Dear Lisa, meanwhile I can compile under Linux the micropython for Linux and for the STM32 processors. But I can not compile the upueasy version. Could you possibly write a few words when you have time? Greetings Peter Rename the modules directory in the STM32 directory to modules.old Unpack the at...
- 05 Feb 2018, 17:29
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
Re: STM32 boards
Hi Lisa That's all nothing else. Unless there is another way to get more logs of it. I am using board and ethernet card from the post above. Another thing is that I have to manually run it by running "import upyeasy" and then "upyeasy.main()" and then getting "[debug] uPyEa...
- 05 Feb 2018, 17:22
- Forum: uPyEasy: Software
- Topic: Questions about components of uPyEasy
- Replies: 26
- Views: 33118
Re: Questions about components of uPyEasy
Answering my own question, after some more Googling... :oops: Unix port of Micropython - setup on Linux Mint. The penny finally dropped, the syntax I needed was " ./micropython " (i.e. run micropython). But first, I needed to "make" the micropython system. I found some instructi...
- 05 Feb 2018, 17:13
- Forum: uPyEasy: Software
- Topic: Questions about components of uPyEasy
- Replies: 26
- Views: 33118
Re: Questions about components of uPyEasy
I have been stuck when installing additional modules manually on "ImportError: no module named '_onewire' " Now I'm trying to add it from /extmod, but no success by now.... Please post here if you finally figure it out. The _onewire library is a hardware library which doesn't exists on un...
- 03 Feb 2018, 20:00
- Forum: uPyEasy: Software
- Topic: Questions about components of uPyEasy
- Replies: 26
- Views: 33118
Re: Questions about components of uPyEasy
Hi Lisa, A couple of "naive" questions coming up! Please excuse if they seem silly questions. ;) As you know, I'm planning to try to develop an OpenHAB MQTT protocol, at least in basic form. Working towards that, I'm in the process of setting up my toolchain (I've moved over to Linux now,...
- 03 Feb 2018, 19:40
- Forum: uPyEasy: General Discussion
- Topic: Blockly Events
- Replies: 21
- Views: 30579
Re: Blockly Events
Great Lisa ! Programming is soooo 1980 ;) Really? Looking back, my days in Assembler were the best.... Assembler? OMG! :shock: At work i've banned programming for about 80%! We make models and computers are generating most efficient application code for us (with certified quality and traceability)....
- 02 Feb 2018, 19:07
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
Lisa, if I flash the file upyeasy_v020_test_20180128_stm32-pybv3_1024.dfu on the PYBv1.1 the COM port is gone. I'm flashing on Windows with dfu-util - old 0 -D upyeasy_v020_test_20180128_stm32-pybv3_1024.dfu If I flash the original MicroPython, the COM port is back. That's not right or? Did you tur...
- 02 Feb 2018, 19:04
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
So STM boards ... I just got a PYBv1.1 with STM32F405RG and flashed it with normal MicroPython . My machine immediately detected an additional drive with boot.py and main.py. Wow, great. Can I simply copy the .py files from your github to this drive? Unfortunately, I have no experience with microPy...
- 02 Feb 2018, 13:55
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
But real python is running on the Pi. :) Also with I2C. I had built some devices with sensors and PWM for my LEDs a long time ago. They also did not run so reliably. Often there were problems with the microSD. The Card was suddenly unreadable. With my PI3s I booted over a USB stick, that was little...
- 02 Feb 2018, 12:09
- Forum: uPyEasy: Hardware
- Topic: STM32 boards
- Replies: 66
- Views: 135778
- 02 Feb 2018, 12:07
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 479483
Re: ESP32 boards
The STM32F405RGT6 has little memory. Or are there better solutions? Yes, the orange/raspberry pi which have it all, loads of memory and ethernet and wifi, however they have a tradeoff in terms of latency. Besides that, i haven't found so far an I2C python library for the pi's which can be used with...