Search found 229 matches
- 27 Dec 2017, 17:14
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 471998
Re: ESP32 boards
Hi Lisa, Just got back onto this. Thanks for sending the 2MB version to try. Initially I'm working with the LOLIIN32 LITE board as it has the revision 1 chip, and just to keep it relatively simple and straight forward. I haven't yet tried this version on my other board, the DOIT devkit v1. First off...
- 25 Dec 2017, 22:17
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 471998
Re: ESP32 boards
I've updated all libraries and rebuild it, can you download the image from here and try again? If it still has the same error, can you set a different port using this: upyeasy.setwifi('<your ssid>', '<your ssid password>','', '',8000) And then reboot to see if that's better. Hi Lisa, I just got bac...
- 23 Dec 2017, 22:10
- Forum: uPyEasy: Hardware
- Topic: ESP32 boards
- Replies: 277
- Views: 471998
Re: ESP32 boards
Hi Lisa, About the OSError 128 I've been experiencing on my DOIT and Wemos LOLIN32 LITE boards... I've been looking back through our messages, and I think we may have been looking at the wrong bit of code. 1. The last line of errors in my log is: File "uasyncio/__init__.py", line 241 , in ...
- 23 Dec 2017, 20:48
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Yes, it's good to have a dedicated area of the forum for uPyEasy
- 22 Dec 2017, 21:42
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
What's the second ESP32 chip version you have? It's a Wemos LOLIN LITE32 (v1.0.0) board (seems to be a cut-down LOLIN32 with less GPIOs exposed). https://www.aliexpress.com/item/WEMOS-LOLIN32-Lite-V1-0-0-wifi-bluetooth-board-based-ESP-32-esp32-Rev1-MicroPython-4MB/32831394824.html?spm=a2g0s.9042311...
- 22 Dec 2017, 17:44
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
This is my ESP32 testmachine: https://nl.aliexpress.com/item/Official ... 21054.html Isn't that the same as your ESP32? Yes, it looks the same as mine. Yours could possibly be a different version of the ESP32 chip if it is recently purchased. Mine was bought about 6 months ago, also from Aliexpress...
- 21 Dec 2017, 09:04
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Having trouble attaching file here. It keeps saying invalid extension. I'll email it to you.Can you get me a complete log?
AndrewJ
- 20 Dec 2017, 23:03
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Hi Lisa, Ok, I followed the steps New version on google drive, can you load that one in the ESP32? After the error do: >>> Import uos >>> uos.remove('boot.py') After reboot, on repl prompt: >>> import wstest and I got I (26302) modsocket: Initializing Bind address info: [(2, 1, 0, '0.0.0.0', ('0.0.0...
- 20 Dec 2017, 21:08
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Just gave it a try on the Wemos LOLIN LITE.
Unfortunately, I get the same two errors, 128 then 2/ENOENT
Unfortunately, I get the same two errors, 128 then 2/ENOENT
- 20 Dec 2017, 20:56
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Just tried the latest version from Google Drive on my DOIT Devboard V1. I temporarily removed security on my wireless network to allow it to connect. Unfortunately still getting errors a few seconds after restart. This is from the log after the long series of startup messages.... * Running on http:/...
- 20 Dec 2017, 17:55
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Thanks, Lisa. Excellent work!
I'll give the new version a try on my Doit board and I'll let you know about oserror 128.
Since the previous alpha I've received a Wemos Lolin Lite ESP32. I'll try that as well.
Cheers
AndrewJ
I'll give the new version a try on my Doit board and I'll let you know about oserror 128.
Since the previous alpha I've received a Wemos Lolin Lite ESP32. I'll try that as well.
Cheers
AndrewJ
- 13 Dec 2017, 18:07
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Hi Lisa, You may have missed it in my earlier post, but i had already tried the procedure you suggested. :) Anyway, I've just had another go, and in fact for good measure I went right back to the beginning, erased the ESP32 and reflashed it, the done the extra commands in the REPL. At each step wher...
- 13 Dec 2017, 13:30
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
I've been googling the error messages I saw. Nothing much for File "upyeasy/__init__.py, but I did find something which sounds similar for File picoweb/__init__.py -- see this link, hope it may help ...
https://forum.micropython.org/viewtopic.php?t=3651
https://forum.micropython.org/viewtopic.php?t=3651
- 13 Dec 2017, 13:26
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Hi Lisa, Thanks for the reply. I just tried again unplugging the ESP32, with a long period (several minutes) before restarting, but sadly it's still not working. :( After all the [debug] messages I see it running, for about 5 secs, then it throws an error... * Running on http://0.0.0.0:80/ Traceback...
- 12 Dec 2017, 22:59
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Hi again Lisa, Some progress now although not yet there .... Discovered that my microUSB connector was not secure in the ESP32, it now looks like this was the main cause of my recent problems, so please ignore my post earlier this evening. Repeated the whole process from the start with a better usb ...
- 12 Dec 2017, 19:48
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
I tried the steps recommended in your reply to CHK_BLN, but sadly not working yet. After a hardware reboot, reconnected to screen... >>> import upyeasy - no errors >>> upyeasy.main() - I got the following output: I (12626650) wifi: wifi driver task: 3ffde154, prio:23, stack:4096 I (12626650) wifi: I...
- 11 Dec 2017, 22:23
- Forum: Experimental
- Topic: ESP32 R20000
- Replies: 11
- Views: 20861
Re: ESP32 R20000
Thanks, I'll give it a try.
- 11 Dec 2017, 17:16
- Forum: Experimental
- Topic: ESP32 R20000
- Replies: 11
- Views: 20861
Re: ESP32 R20000
I'm interested in trying this myself. Which version firmware are you using, and where can I find it, please?
- 11 Dec 2017, 10:08
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Hi Lisa, this alpha tester could be me ... I'll pm you.
AndrewJ
AndrewJ
- 10 Dec 2017, 22:42
- Forum: ESP Easy: General Discussion
- Topic: Feature request. Actually a UI web page request
- Replies: 9
- Views: 6896
Re: Feature request. Actually a UI web page request
Many thanks.
- 10 Dec 2017, 22:38
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Lisa, Good news about the ESP32 workaround.
I'm trying to access the Google Drive using the link you sent me by PM some weeks ago, but I get a 404 error. Could you send me an updated link, please?
Tia
AndrewJ
I'm trying to access the Google Drive using the link you sent me by PM some weeks ago, but I get a 404 error. Could you send me an updated link, please?
Tia
AndrewJ
- 09 Dec 2017, 12:19
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
Great work, thanks for the update. Good luck with fixing the ESP32 bug!
- 04 Dec 2017, 14:14
- Forum: ESP Easy: General Discussion
- Topic: Feature request. Actually a UI web page request
- Replies: 9
- Views: 6896
Re: Feature request. Actually a UI web page request
+1 for moving the command to the top of the page. For me, it would make it easier to use.
AndrewJ
AndrewJ
- 26 Nov 2017, 09:52
- Forum: ESP Easy: Projects / Applications
- Topic: Private project [MONITORING ENERGY CONSUMPTION USING ESP8266]
- Replies: 3
- Views: 3985
Re: Private project [MONITORING ENERGY CONSUMPTION USING ESP8266]
Nice project, very clear description and good links too. Thanks for posting!
- 22 Oct 2017, 22:31
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
This is a really interesting development, keep the updates coming please!
I like the idea of examples of old and new rules/scripts. A range of complexity would be good, going from the simple to the more advanced. That's if time allows!
I like the idea of examples of old and new rules/scripts. A range of complexity would be good, going from the simple to the more advanced. That's if time allows!
- 06 Oct 2017, 12:11
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 253757
Re: uPyEasy
This is a fascinating topic, thanks for posting. Looking forward to being able to try it out.
- 03 Oct 2017, 13:19
- Forum: ESP Easy: General Discussion
- Topic: Number of Devices / Tasks limited to 12 ?
- Replies: 36
- Views: 30737
Re: Number of Devices / Tasks limited to 12 ?
This is really good news, that it is possible to run so many Ds18b20's together. I'll give it a try..
Previously I seemed to hit a limit with 4 DS18B20'S, but that was with the normal ESPeasy (can't remember now which version).
Definitely inspiration to go further, thanks.
Previously I seemed to hit a limit with 4 DS18B20'S, but that was with the normal ESPeasy (can't remember now which version).
Definitely inspiration to go further, thanks.
- 02 Oct 2017, 14:34
- Forum: Introduce yourself
- Topic: Hello from Sweden
- Replies: 6
- Views: 5868
Re: Hello from Sweden
I really appreciate the good work you are doing with rules and the wiki. Thank you.
- 23 Sep 2017, 09:16
- Forum: ESP Easy: Software
- Topic: Local MQTT broker on esp8266
- Replies: 7
- Views: 6830
Re: Local MQTT broker on esp8266
One thing I can suggest to check (from bitter experience! ).
Make sure that the client name is different in each ESP or other device connecting to your MQTT broker. Otherwise it won't work.
Hope this helps.
Make sure that the client name is different in each ESP or other device connecting to your MQTT broker. Otherwise it won't work.
Hope this helps.
- 22 Sep 2017, 09:49
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy v2.0.0-dev12 released
- Replies: 44
- Views: 47741
Re: ESPEasy v2.0.0-dev12 released
Thanks to all who have worked hard to get this ready for release! A major milestone!
- 15 Sep 2017, 22:26
- Forum: RFLink: Development and announcements
- Topic: RFLink R47 available
- Replies: 5
- Views: 15119
Re: RFLink R47 available
A most impressive list of improvements and additions!
Thanks.
Thanks.
- 20 Aug 2017, 20:50
- Forum: ESP Easy: Software
- Topic: Local storage in ESP when offline ??
- Replies: 21
- Views: 24888
Re: Local storage in ESP when offline ??
Hello, Vincen, My rule works with a Dummy task, see config below Dummy_task.PNG The rule is as follows:- // Filter temps to reduce data load... On DS18B201#Temperature do If [DS18B201#Temperature]<[MQTT_filter#T1_fall_trigger] Event Send_T1 endif If [DS18B201#Temperature]>[MQTT_filter#T1_rise_trigge...
- 15 Aug 2017, 10:04
- Forum: ESP Easy: Software
- Topic: Local storage in ESP when offline ??
- Replies: 21
- Views: 24888
Re: Local storage in ESP when offline ??
+1 for me.
I've experimented with a rule to achieve the same, it works reasonably well, but it's cumbersome. Would be much better if integrated into the firmware.
I've experimented with a rule to achieve the same, it works reasonably well, but it's cumbersome. Would be much better if integrated into the firmware.
- 13 Aug 2017, 11:23
- Forum: ESP Easy: Hardware
- Topic: Sonoff Basic - AP not apearing on first boot with pre-built BIN
- Replies: 59
- Views: 77189
Re: Sonoff Basic - AP not apearing on first boot with pre-built BIN
It would be good if someone would add this info to the Wiki. I'd do it myself, but I don't believe I have the access to it?
Andrew
Andrew
- 30 Jul 2017, 19:12
- Forum: ESP Easy: General Discussion
- Topic: WiFi Direct Connection
- Replies: 17
- Views: 13201
Re: WiFi Direct Connection
@manjh, Many thanks for the links. It's given me some ideas already for future projects. I had not previously discovered the Nodo forum, there is a wealth of interesting stuff there, thank you! It's a challenge for my extremely small knowledge of Dutch, but fortunately there is always Google Transla...
- 29 Jul 2017, 18:44
- Forum: ESP Easy: General Discussion
- Topic: WiFi Direct Connection
- Replies: 17
- Views: 13201
Re: WiFi Direct Connection
Hello manjh,
You mentioned that you had constructed a radiator valve with remote control, based on a Honeywell valve. I'd be very interested to know more if you would like to share....
Best wishes
Andrew
You mentioned that you had constructed a radiator valve with remote control, based on a Honeywell valve. I'd be very interested to know more if you would like to share....
Best wishes
Andrew
- 27 Jul 2017, 21:56
- Forum: ESP Easy: General Discussion
- Topic: ESP12-E blocked when MQTT broker is lost
- Replies: 9
- Views: 6458
Re: ESP12-E blocked when MQTT broker is lost
Hi again,
Just another thought on re-reading your post...
I assume that in your own system you have entries for Controller User and Password, and they were just blankin your post for security?
These need to match the way your MQTT broker is defined. Sorry if I'm stating the obvious!
Just another thought on re-reading your post...
I assume that in your own system you have entries for Controller User and Password, and they were just blankin your post for security?
These need to match the way your MQTT broker is defined. Sorry if I'm stating the obvious!
- 27 Jul 2017, 21:53
- Forum: ESP Easy: General Discussion
- Topic: ESP12-E blocked when MQTT broker is lost
- Replies: 9
- Views: 6458
Re: ESP12-E blocked when MQTT broker is lost
I notice a "?" against MQTT protocol in your last post. For what it's worth, I use "Openhab MQTT" (but then, I am using Openhab!) My understanding is that the "Openhab" protocol also serves as a general-purpose MQTT protocol, but I think that Domoticz, for example, need...
- 27 Jul 2017, 20:26
- Forum: ESP Easy: General Discussion
- Topic: ESP12-E blocked when MQTT broker is lost
- Replies: 9
- Views: 6458
Re: ESP12-E blocked when MQTT broker is lost
Yes, I've had the same experience of the unit behaving strangely on first boot, when my MQTT broker settings were not set up correctly. Unfortunately I can't remember which version of ESPeasy I was using at the time, but I suspect it was v120. In the end, I managed to correct the settings, one at a ...
- 26 Jul 2017, 19:46
- Forum: ESP Easy: Software
- Topic: H801 rgbw plugin install
- Replies: 8
- Views: 7699
Re: H801 rgbw plugin install
Hello parksy78, It should work if you copy the plugin .ino file into the same directory containing all the ESPeasy files. Depending on the version of ESPEasy you are using (if it is one of the version 2.0.0 releases) you may need to select the Development version in the main ESPEasy.ino file. Then c...
- 17 Jul 2017, 14:34
- Forum: ESP Easy: Software
- Topic: How to use Syslog?
- Replies: 10
- Views: 10697
Re: How to use Syslog?
Hello @Drum,
I've not (yet) tried it on a QNAP NAS, but glad to hear it works well there. (A NAS is on my list of future projects.)
Are you still interested in trying it again on the Raspberry Pi? - if so, I can share how I did mine (a Pi3 running Openhabian) if it helps.
Andrew
I've not (yet) tried it on a QNAP NAS, but glad to hear it works well there. (A NAS is on my list of future projects.)
Are you still interested in trying it again on the Raspberry Pi? - if so, I can share how I did mine (a Pi3 running Openhabian) if it helps.
Andrew
- 16 Jul 2017, 17:47
- Forum: ESP Easy: Software
- Topic: How to use Syslog?
- Replies: 10
- Views: 10697
Re: How to use Syslog?
Many thanks for your help, @grovkillen and @JR01! I now have it working for one of my NodeMCU's which is running ESPEasy, and it will be easy to apply it to other units as I need to. :D I'll probably disable it again when I've done with my debugging, as I won't want to fill up my Raspi SD card too m...
- 14 Jul 2017, 21:33
- Forum: ESP Easy: Software
- Topic: How to use Syslog?
- Replies: 10
- Views: 10697
How to use Syslog?
Hi everyone, Can someone please point me to a "how to" for setting up and using syslog to receive logs from ESPEasy nodes? I think it would be useful when de-bugging rules, easier to follow what is happening perhaps than via the web interface log page. I've a Raspberry Pi 3 running OpenHAB...
- 13 Jul 2017, 16:25
- Forum: ESP Easy: General Discussion
- Topic: "Load" and "Free Mem" (version 2.0.0-dev10)
- Replies: 4
- Views: 3899
Re: "Load" and "Free Mem" (version 2.0.0-dev10)
Ah, thanks majklovec... it's obvious when you say it!! Useful information.
I'm learning all the time.
Can anyone tell me what the two values for Free Mem indicate, please?
Thanks in advance,
Andrew
I'm learning all the time.
Can anyone tell me what the two values for Free Mem indicate, please?
Thanks in advance,
Andrew
- 11 Jul 2017, 13:47
- Forum: ESP Easy: General Discussion
- Topic: "Load" and "Free Mem" (version 2.0.0-dev10)
- Replies: 4
- Views: 3899
Re: "Load" and "Free Mem" (version 2.0.0-dev10)
Thanks, Grovkillen, that helps with one part of my question.
Devs, any information available about the rest, please?
Devs, any information available about the rest, please?
- 10 Jul 2017, 22:04
- Forum: ESP Easy: General Discussion
- Topic: "Load" and "Free Mem" (version 2.0.0-dev10)
- Replies: 4
- Views: 3899
"Load" and "Free Mem" (version 2.0.0-dev10)
Hi everyone, Can anyone please explain for me a bit more about the meaning of the numbers presented on the System Info page of 2.0.0-dev10? I see, for example, Load: 12% (LC=8525) ... I guess the 12% is the proportion of maximum load which the ESP8266 (processor?) can handle, but what is the LC? and...
- 27 Jun 2017, 15:41
- Forum: ESP Easy: General Discussion
- Topic: In a Shoebox
- Replies: 7
- Views: 5757
Re: In a Shoebox
I personally quite like these small breadboards. They have two disadvantages (to get those out of the way first) - no power rails (as you say) but I have got around that by putting my NodeMCU midway along the length, leaving a free row at each end which can be used for + and -ve. - many nodeMCU's ar...
- 16 Jun 2017, 09:04
- Forum: ESP Easy: Hardware
- Topic: WS2812 single LED/Pixel Plugin
- Replies: 31
- Views: 38695
Re: WS2812 single LED/Pixel Plugin
Hey, fantastic!!
Andrew
Andrew
- 15 Jun 2017, 19:33
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 735000
Re: ESP Easy Mega
Hi papparone, See this page in the Wiki: https://www.letscontrolit.com/wiki/index.php/Tutorial_Arduino_Firmware_Upload "For 4M boards: Select 1M SPIFF" (I have to say I don't fully understand why this is. My first thought, like you, was to use 3M SPIFFS. But I used the recommendation above...
- 15 Jun 2017, 17:39
- Forum: ESP Easy: Hardware
- Topic: WS2812 single LED/Pixel Plugin
- Replies: 31
- Views: 38695
Re: WS2812 single LED/Pixel Plugin
Hello @papparone, That sounds like a really useful device. Well, one way you could go is to write your own plugin. I'm working on one at the moment, for a completely different sensor module. I agree that there is a shortage of guidance on this, but I'm making progress. Here's some information I've b...