Search found 771 matches

by Stuntteam
16 Nov 2016, 20:22
Forum: RFLink: Nederlands support forum
Topic: Promax (Action) R43 gaat niet uit
Replies: 5
Views: 5227

Re: Promax (Action) R43 gaat niet uit

Nee, dat mag geen probleem zijn.
De domotica software is wat dat betreft goed afgestemd op rflink..
by Stuntteam
16 Nov 2016, 19:37
Forum: RFlink: General Discussions
Topic: Milight WW/CW LED Controller
Replies: 7
Views: 7533

Re: Milight WW/CW LED Controller

RFLink should work with your device..
Did you check the FAQ?
by Stuntteam
16 Nov 2016, 19:32
Forum: RFLink: Hardware Related discussions
Topic: Trouble with RFLink on SYNOLOGY
Replies: 15
Views: 12052

Re: Trouble with RFLink on SYNOLOGY

Connect RFlink to a PC and run RFlink loader to see if it also stops aftre 7 minutes or not..
Here you can see how to do that:
http://www.nemcon.nl/blog2/development
by Stuntteam
16 Nov 2016, 17:10
Forum: RFLink: Hardware Related discussions
Topic: RFLink connected to Rasp GPIO instead of USB!!
Replies: 17
Views: 20587

Re: RFLink connected to Rasp GPIO instead of USB!!

From the Arduino/RFlink side there are no modifications needed in the software.

You will need to install some serial port software on the Pi.
by Stuntteam
16 Nov 2016, 16:17
Forum: RFLink: Hardware Related discussions
Topic: RFLink connected to Rasp GPIO instead of USB!!
Replies: 17
Views: 20587

Re: RFLink connected to Rasp GPIO instead of USB!!

Arduino Mega Pin 0 (RX0) and 1 (TX0) are exactly the same in terms of signals as to what is available on the USB port. The Arduino Mega pins are 5 volt. So you will need to convert at least the TX pin to 3.3 volt for the Pi.. otherwise you can harm the Pi. No idea what software you will need on the ...
by Stuntteam
16 Nov 2016, 15:40
Forum: RFLink: Unsupported devices
Topic: Ikea "TRÅDFRI" smart lights serie based on ZigBee Light Link (ZLL)
Replies: 25
Views: 39384

Re: Ikea "TRÅDFRI" smart lights based on ZigBee Light Link (ZLL)

Tradfri communicates on 2.4 Ghz.
So far it is unknown if the CC2500 can be used. There are other possibilities as well.
by Stuntteam
15 Nov 2016, 12:45
Forum: RFLink: Development and announcements
Topic: New RFLink firmware (R44) now available!
Replies: 18
Views: 31629

Re: New RFLink firmware (R44) now available!

Correct, the issue is that one of the features that require additional hardware is activated.
That, together with the hardware detection failing on some Arduino Mega's causes a problem.
by Stuntteam
14 Nov 2016, 19:36
Forum: RFLink: Hardware Related discussions
Topic: RFLink connected to Rasp GPIO instead of USB!!
Replies: 17
Views: 20587

Re: RFLink connected to Rasp GPIO instead of USB!!

My thought is: We can eliminate the extra Arduino board next to the Rasp by simply intergrate the ATmega2560 Arduino stuff with the RFlink gateway board hardware together and simply stack it as a shield to the Rasp. For convinience the serial communication of the Rasp to the ATmega of the shield sh...
by Stuntteam
14 Nov 2016, 15:44
Forum: RFLink: Unsupported devices
Topic: Support Request for SilverCrest 3711A / 113854 power switch
Replies: 11
Views: 18499

Re: Support Request for SilverCrest 3711A / 113854 power switch

It is using a scramble protocol, we are working on it.. but it takes time
by Stuntteam
13 Nov 2016, 16:54
Forum: RFLink: Hardware Related discussions
Topic: RFLink connected to Rasp GPIO instead of USB!!
Replies: 17
Views: 20587

Re: RFLink connected to Rasp GPIO instead of USB!!

Yes, for the ESp it makes sense..
But for the Pi I do not see that advantage.
by Stuntteam
13 Nov 2016, 12:57
Forum: RFLink: Hardware Related discussions
Topic: RFLink connected to Rasp GPIO instead of USB!!
Replies: 17
Views: 20587

Re: RFLink connected to Rasp GPIO instead of USB!!

When using a level shifter to compensate for the voltage differences (arduino uses 5 volts, Pi is not 5 volt tolerant), you can connect the Mega's TX0 and RX0 to a Pi's io pins. You should then be able to do some virtual serial port software on the Pi and simulate the serial port. I do not see the a...
by Stuntteam
13 Nov 2016, 01:33
Forum: RFLink: Nederlands support forum
Topic: Milight aansturing kleuren
Replies: 2
Views: 3131

Re: Milight aansturing kleuren

Waarom zou dat een referentie tabel zijn? Het gaat in die link over de wifi bridge en dat zijn totaal andere commando's en settings. De kleuren tabel op hun site heeft geen enkele overeenkomst met het RF signaal. Kleuren volgens het kleuren wiel op de remote zijn: 9 uur: paars waarde 00 7 uur: rood ...
by Stuntteam
13 Nov 2016, 01:06
Forum: RFLink: Hardware Related discussions
Topic: Maclean Energy MCE07 - 1st channel problem
Replies: 3
Views: 4147

Re: Maclean Energy MCE07 - 1st channel problem

Ca you make a debug log for channel 1 and channel 2?
Here you can find how to do that: http://www.nemcon.nl/blog2/development
by Stuntteam
11 Nov 2016, 01:00
Forum: RFLink: Hardware Related discussions
Topic: Ansluta - I can recieve but not send
Replies: 6
Views: 6336

Re: Ansluta - I can recieve but not send

Send you a test version.. For those who are wondering, Ikea made 2 versions of Ansluta. A 433mhz version and a 2.4 ghz version. For the 433mhz version you will need a 433mhz transceiver I have no debug data yet for this type so I do not know if it is supproted.... For the 2.4Ghz version you will nee...
by Stuntteam
10 Nov 2016, 00:28
Forum: RFLink: Unsupported devices
Topic: Xiaomi Mi Smart Home
Replies: 7
Views: 19178

Re: Xiaomi Mi Smart Home

Hi,

Unknown for now.. but we will probably look into it.
by Stuntteam
08 Nov 2016, 14:28
Forum: RFlink: General Discussions
Topic: Source Code?
Replies: 20
Views: 23234

Re: Source Code?

Just looking at original items: The original remotes (transmitter) have a unique address, the light (receiver) is put in pairing mode and learns the address of the remote. After pairing the light will only respond to the remote control address that it was paired to. The light is only able to store 1...
by Stuntteam
08 Nov 2016, 00:51
Forum: RFlink: General Discussions
Topic: Source Code?
Replies: 20
Views: 23234

Re: Source Code?

I have an Ikea Ansluta light and would like to use multiple remotes with one light (unsupported). RFlink supports u pto 65000 Ansluta remotes and can control the same number of lights.. However, You can not use multiple remote controls with 1 single light as the light will only learn 1 remote contr...
by Stuntteam
03 Nov 2016, 11:29
Forum: RFLink: Hardware Related discussions
Topic: 433 mHz LNA for Receiver and Freezer Temp Sensor
Replies: 23
Views: 17251

Re: 433 mHz LNA for Receiver and Freezer Temp Sensor

Okay, but how is that related to a freezer temperature?
Perhaps it is better to put your data into some genealogical database?
by Stuntteam
02 Nov 2016, 00:55
Forum: RFLink: Development and announcements
Topic: New RFLink firmware (R44) now available!
Replies: 18
Views: 31629

Re: New RFLink firmware (R44) now available!

Did you download a fresh copy of the r44 firmware?
by Stuntteam
02 Nov 2016, 00:35
Forum: ESP Easy: Hardware
Topic: Interest for esp8266 sensor hardware?
Replies: 33
Views: 25373

Re: Interest for esp8266 sensor hardware?

Maybe you should be more clear on what exactly you are trying to produce. It sounds like a PCB with an esp and a single sensor like a ds18b20 (possibly on exchangeable modules) in a little case for around 25-30 euros and then batteries have to be purchased seperately.. Sorry, but why on earth would ...
by Stuntteam
01 Nov 2016, 23:24
Forum: RFLink: Hardware Related discussions
Topic: CC2500 - or equivalent for Ansluta?
Replies: 7
Views: 9210

Re: CC2500 - or equivalent for Ansluta?

I have seen, there is now a requirement for CC2500 to be used for connectivity to Ansluta devices. Does it mean, I can use Ansluta and Milight connection at the same time (pins seem to be overlaping - any way to move them?)? Also, I can see, on Aliexpress, they offer MD7105-SY (or A7105) claiming t...
by Stuntteam
28 Oct 2016, 16:31
Forum: RFLink: Nederlands support forum
Topic: Ontvangstbereik van KlikaanKlikuit zender en RFLink gateway
Replies: 4
Views: 5673

Re: Ontvangstbereik van KlikaanKlikuit zender en RFLink gateway

Wellicht de plaats van rflink even opnieuw bekijken.. niet te dicht bij een eventuele Pi of storingsbron, dikke muren, deurposten van metaal enz.
by Stuntteam
28 Oct 2016, 12:08
Forum: RFLink: Unsupported devices
Topic: Ikea "TRÅDFRI" smart lights serie based on ZigBee Light Link (ZLL)
Replies: 25
Views: 39384

Re: Ikea "TRÅDFRI" smart lights based on ZigBee Light Link

Lightify can work with the Hue bridge but there are some pairing issues. At least with Hue it seems one bulb can only be connected to one hub. As for zigbee itself, there are 3 versions / flavors. Zigbee 3.0 is the latest and combines the two previous versions: ZigBee Light Link (ZLL) and ZigBee Hom...
by Stuntteam
27 Oct 2016, 17:44
Forum: RFLink: Unsupported devices
Topic: weather station Aercus WS3083 ~= Fineoffset WA2080
Replies: 3
Views: 4538

Re: weather station Aercus WS3083 ~= Fineoffset WA2080

Hi, We need debug data from RFlink. How to get that is explained here: http://www.nemcon.nl/blog2/development Including the values that should be transmitted (values read from the Aercus display at the moment the debug packet appears) Preferably for a few different readings. Post data here or mail t...
by Stuntteam
27 Oct 2016, 12:52
Forum: RFLink: Unsupported devices
Topic: RFlink and Mysensors
Replies: 6
Views: 6356

RFlink and Mysensors

RFlink now supports MySensors devices. At least the temperature (V_TEMP), humidity (V_HUM), V_TRIPPED and V_LIGHT_LEVEL are supported However, to extend support we need debug data. A log from both the sensor and rflink. That way we can see what data is transmitted and that received data is handled i...
by Stuntteam
27 Oct 2016, 12:49
Forum: RFLink: Unsupported devices
Topic: Ikea "TRÅDFRI" smart lights serie based on ZigBee Light Link (ZLL)
Replies: 25
Views: 39384

Re: Ikea "TRÅDFRI" smart lights based on ZigBee Light Link

Note that we are interested in adding Zigbee support for Philips Hue and Ikea Tradfri..
by Stuntteam
27 Oct 2016, 08:48
Forum: RFlink: General Discussions
Topic: Possible to run RFLink nativly on ESP32 MCU (ESP8266 successor) instead of on an Arduino?
Replies: 4
Views: 7298

Re: Possible to run RFLink nativly on ESP32 MCU (ESP8266 successor) instead of on an Arduino?

I am very sorry, but since you could not stay on topic, I had to clean up and lock the thread..
by Stuntteam
26 Oct 2016, 17:46
Forum: RFLink: Development and announcements
Topic: New RFLink firmware (R44) now available!
Replies: 18
Views: 31629

New RFLink firmware (R44) now available!

Brand new RFLink Gateway firmware adds support for Ikea Ansluta, Philips Living Colors Gen1, MySensors devices and has "Mini" GPIO. For Ansluta or Living Colors you will need a CC2500 module. Details on how to connect these modules are on the Wiring details page. Changelog: R44: - New Devi...
by Stuntteam
26 Oct 2016, 13:25
Forum: RFLink: Nederlands support forum
Topic: Selectremote
Replies: 16
Views: 23342

Re: Selectremote

Ja, wel eerst ff de r44 afmaken.. release komt eraan..
by Stuntteam
26 Oct 2016, 13:20
Forum: RFLink: Unsupported devices
Topic: Ikea "TRÅDFRI" smart lights serie based on ZigBee Light Link (ZLL)
Replies: 25
Views: 39384

Re: Ikea "TRÅDFRI" smart lights based on ZigBee Light Link

Possible.. I would need to get one.. could prolly go to Belgium for it.
by Stuntteam
26 Oct 2016, 00:37
Forum: RFLink: Nederlands support forum
Topic: Selectremote
Replies: 16
Views: 23342

Re: Selectremote

We kijken of er wat aan te doen is..
by Stuntteam
25 Oct 2016, 16:19
Forum: RFlink: General Discussions
Topic: Possible to run RFLink nativly on ESP32 MCU (ESP8266 successor) instead of on an Arduino?
Replies: 4
Views: 7298

Re: Possible to run RFLink nativly on ESP32 MCU (ESP8266 successor) instead of on an Arduino?

RFlink is running on a seperate device so that it can dedicate full processing power to the primary task of converting RF signals. Adding it to the Pi would mean it has to share resources with other tasks and thats not what we want. Right now priority goes to addding support for more devices and mor...
by Stuntteam
24 Oct 2016, 15:10
Forum: RFlink: General Discussions
Topic: Possible to run RFLink nativly on ESP32 MCU (ESP8266 successor) instead of on an Arduino?
Replies: 4
Views: 7298

Re: Possible to run RFLink nativly on ESP32 MCU (ESP8266 successor) instead of on an Arduino?

No, we probably will port rflink to additional platforms later.
But right now we are not supporting any other platforms.
If you need Wifi, you can use ser2net on an esp and connect to the ip pins.
by Stuntteam
24 Oct 2016, 00:42
Forum: RFLink: Unsupported devices
Topic: Solved: DC44 PIR units not acting as DC4's
Replies: 7
Views: 4998

Re: DC44 PIR units not acting as DC4's

R44 will solve this issue..
by Stuntteam
23 Oct 2016, 23:11
Forum: RFLink: Nederlands support forum
Topic: Selectremote
Replies: 16
Views: 23342

Re: Selectremote

Na de auto detect van domoticz voeg je het device toe en moet het werken..
De learning mode is ongeschikt
by Stuntteam
13 Oct 2016, 09:57
Forum: RFLink: Nederlands support forum
Topic: Promax (Action) R43 gaat niet uit
Replies: 5
Views: 5227

Re: Promax (Action) R43 gaat niet uit

Maak een debug log zoals hier beschreven: http://www.nemcon.nl/blog2/development
van de knoppen op je remote en mail deze naar frankzirrone@gmail.com
dan kunnen we bekijken wat er mis gaat.
by Stuntteam
11 Oct 2016, 21:30
Forum: RFLink: Hardware Related discussions
Topic: Mega, RFLink and nrf24l01
Replies: 5
Views: 7434

Re: Mega, RFLink and nrf24l01

Yes, you just stick it on.. and it is prepared for the NRF (vcc too)
by Stuntteam
11 Oct 2016, 19:47
Forum: RFLink: Hardware Related discussions
Topic: Mega, RFLink and nrf24l01
Replies: 5
Views: 7434

Re: Mega, RFLink and nrf24l01

1) the NRF24L01 should be connected to RFLink pins or I need additional wires to connect to mega? Should not matter much. Maybe first check what RFLink PCB version you have, I understand there are different versions. For what do you want to use the NRF, do you want to use a Milight bulb? 2) the Rfl...
by Stuntteam
06 Oct 2016, 16:59
Forum: RFLink: Hardware Related discussions
Topic: RFlink 433 + 868 mhz
Replies: 10
Views: 13522

Re: RFlink 433 + 868 mhz

RFlink will be able to use both frequencies in an upcoming version..
by Stuntteam
06 Oct 2016, 12:53
Forum: RFLink: Unsupported devices
Topic: Ikea ANSLUTA support
Replies: 13
Views: 13532

Re: Ikea ANSLUTA support

Ansluta is not working with the NRF24L01.. it only works with the CC2500
by Stuntteam
06 Oct 2016, 09:59
Forum: RFLink: Unsupported devices
Topic: Bosch DID09T951 hood
Replies: 1
Views: 3415

Re: Bosch DID09T951 hood

We are already working on this model.
Btw, that second link does not seem to have anything about the Bosch..
by Stuntteam
06 Oct 2016, 00:24
Forum: RFLink: Unsupported devices
Topic: Ikea ANSLUTA support
Replies: 13
Views: 13532

Re: Ikea ANSLUTA support

Support for the 2.4Ghz Ansluta has now been integrated in RFLink :)
by Stuntteam
04 Oct 2016, 15:47
Forum: RFLink: Development and announcements
Topic: Release 43 is available!
Replies: 4
Views: 14882

Re: Release 43 is available!

test implementation was not working stable yet. will take some more time.
We do have working Philips Living Colors and Ikea Ansluta, support for this is coming up first.
by Stuntteam
02 Oct 2016, 19:12
Forum: ESP Easy: Software
Topic: RF 433 plugin for KAKU in the playground
Replies: 42
Views: 48823

Re: RF 433 plugin for KAKU in the playground

well.. I think it was not the idea of putting support for every protocol on it.. otherwise you simply use RFLink which supports more protocols than any other solution..
by Stuntteam
30 Sep 2016, 14:36
Forum: RFLink: Unsupported devices
Topic: Lightwaverf mood switch
Replies: 11
Views: 9601

Re: Lightwaverf mood switch

Well, RFLink has no issues recognizing this. The main problem is that Domoticz has no use for the additional commands. We also have no idea what the expected behaviour would be. "Mood" scenarios can be done with scripts within Domoticz anyway. So perhaps these mood buttons should just be r...