Let's Control It

Rampler

Nevertheless, I would be happy about a stable version. (Although the mega versions are actually stable)
A stable every year, that's my dream.
In between still the mega release ..

Rampler

my best uptime:

Rampler

Hi,
i am still using a release from 2020-02-22, and i am very happy with it.

Is a stable release in the pipeline ?

best regards
Klaus

Rampler

Hi,
does it make sense to wait for a stable release ? (or just use the mega-releases)
At the moment i use a release from february 2020, and i am satisfied.
regards Klaus

Rampler

Hi together, i am using the normally the _normal_ESP8266_4M1M.bin file, so far so good. I saw a file _ESP8266_1M_OTA_FHEM_HA.bin, a also using FHEM. What is the purpose of this file ? What is the purpose of all the other files in the bin directory, many are explained, many not ? During Firmware uplo...

Rampler

Unfortunately, instead of an MQ-7 sensor, an mq-9 was delivered, but anyway I built something together. I think the MQ-7 is much more accurate for CO measurements. In addition, the data sheet of the MQ-9 sensor is not sufficient in my opinion. The formula is only valid for the MQ-7 sensor. So far, i...

Rampler

Nevertheless a formula for vdc to ppm would be nice.
Today i will give it a try with pwm for 1.4 V and a npn transistor. For the intervalls i will use the timerset commands.
Is it even possible to get reasonably realistic values for co?

Rampler

Thank you for the detailed statements made. It is very useful.

Rampler

Hi together, has anybody writen already a plugin for the mq-7 sensor ? According to MQ-7 datasheet, sensor has to run through high- and low-heating cycles in order to get proper measurements. During low temperature phase, CO is absorbed on the plate, producing meaningful data. During high temperatur...

Rampler

Maybe it is time to anounce the first stable ???
In my opinion, a good time !!

Rampler

Hi guys, i have some ESP8266 D1 mini Pro with 16Mbyte. In the past a flashed always the ESP8266_4M1M bins. In the newest version i saw this ESP_Easy_mega-20191122_normal_ESP8266_16M.bin. What is the advantage of this ? Can i use the 16Myte Version, without loosing the configuration ? Does anybody ha...

Rampler

ESP_Easy_mega-20191116_normal_core_260_sdk222_alpha_ESP8266_4M1M.bin

Rampler

My 5 cent to the reboot problem: I have had reboot problems for at least one year !! Now, after using "ESP82xx Core 2_6_0, NONOS SDK 2.2.2-dev(bb83b9b), LWIP: 2.1.2 PUYA support" my ESP's stays up for now. (5 days) I use at all 9 ESP8266 with different access points and different sensor's....

Rampler

... maybe/hopefully this will fix our watchdog problem ...

Any tests in progress ?

Rampler

Hi,
this is working on my side, new and old releases..

Code: Select all

on Taster#Taster do
 if [Dummy#Buttonpress] = 0   //Erster Tastendruck
    oledcmd,on
    TaskValueSet 5,1,1 
    timerSet,1,20
 else
    publish /HMUART3/Taster,1
 endif
endon

Rampler

TD-er wrote: ↑01 Nov 2019, 13:51
Rampler wrote: ↑01 Nov 2019, 10:37 [...]

Good morning, did you forget that?
What did I forget?

.... so I can merge it for tomorrow's build. I thought we get a new build...

Rampler

TD-er wrote: ↑30 Oct 2019, 13:13 Can you try this test build: https://www.dropbox.com/s/7cbfjvg5ytlqc ... 8.zip?dl=0
Please let me know if it does work and it would be great if you could do some more thorough testing so I can merge it for tomorrow's build.

Good morning, did you forget that?

Rampler

Publish again working with the test build.
Congratulations !!!

I cannot see any other errors....

Rampler

Have you also tried a version from let's say 20190928 (1 month ago) ?

Version 20190928 is working, see debug log:

Code: Select all

Client mosqsub|12488-Raspberry received PUBLISH (d0, q0, r0, m0, '/HMUART3/Taster', ... (1 bytes))
/HMUART3/Taster 1

Rampler

Hi, i am using ESP_Easy_mega-20191028_normal_ESP8266_4M1M.bin. Publish command is not working ! The command "publish /HMUART3/Taster,1" publishes nothing. Debug Messages from Broker: Client mosqsub|12301-Raspberry received PUBLISH (d0, q0, r0, m0, '/Gartenhaus/Count_Wind', ... (1 bytes)) /...

Rampler

Hi,
with the actual firmware the measure range is 32V/2A. (settings in plugin)
The technical spezifikation says:
Up to +26V target voltage
Up to ±3.2A current measurement, with ±0.8mA resolution

I am confused..
I want measure up to 3 Amperes with 12 V, ist that possible ?

Rampler

Hello developer, you should install a donate button in the webgui to get more patroens...
Like this:
Donate if you found this useful.

Rampler

bastibasti wrote: ↑13 Apr 2019, 23:05
Rampler wrote: ↑13 Apr 2019, 17:36 This is a known bug !!
Use a version with Core 2.4.1, all is fine ...
I use ESPEasy_mega-20180506 and PWM is working.
No it isn't.... dimming down doesnt work on the 20190413 core241 i just loaded

As a said, try ESPEasy_mega-20180506 and all is fine ..

Rampler

This is a known bug !!
Use a version with Core 2.4.1, all is fine ...
I use ESPEasy_mega-20180506 and PWM is working.

Rampler

What position in the device page listing do these pulse counter plugins have? They should be in only the first 3 or 4 positions. Postion 1 and 2. We are also trying to develop a different way of GPIO handling, since both GPIO related plugins (P001 switch and P003 Pulse) are made way too complex and...

Rampler

Hi together, makes it sense to open a issue for a hardware watchdog problem ? I think the developer are working on it, isnt it ? I have several ESP8266, they all run fine, expext one. The problem ESP8266 device gets after some hours a hardware watchdog reset. Difference to my other's ESP's are, that...

Rampler

Hi,
is it possible to start with Core 2.4.1 for next stable.
The pwm flicker problematic is only fixed in core 2.4.1.....

regards
Klaus
EDIT:
With core 2.4.2 the pwm flicker is back again !!

Rampler

Hi,
now +1 patreon.....
One more idea:
Why not selling some ESP stuff (borads,interfaces, all around ESP, etc..) with i higher price.
I could imagine that many people would buy it, in order to support the project.
regards
Klaus

Rampler

Hi,
on the download page, i can only find the Mega release.
Whats about the V2 release.
Where i can get a stable release (already compiled) ?
regards
Klaus

Rampler

enjoy your holidays

Rampler

Default log level is higher for serial compared to web log. You can change this under advanced (tools). It is already "debug". On my side, the weblog does not show all messages, in comparision to the syslog. SYSLOG (debug): Jul 9 08:59:06 Wohnzimmer_LCD EspEasy: LoadFromFile: config.dat i...

Rampler

Hi,
i dont see all messages which i expect (under tools/log). Through my rules, i should see every 2 second a message.
Over serial connection i saw much more (tested in the past).
Is this behavior wanted ?
regards
Klaus

Rampler

On my side, ESP's are working with hidden SSID. I use static IP, maybe this is the cause.

Rampler

Hi, is there a possibility to get the ESP PWM function flickerfree ?
From PWM,5,3 until PWM,5,200 my LCD Display's flickers, over 200, no flicker...

Rampler

Hi,
now i have bought a WEmOS V1 mini Pro, but same situation..
A debug switch would be nice ...
If a set the serial log level to 4, i see the same as serial log level 0..
regards
Klaus

Rampler

Hi,
where i can find information for the event processing (NONE,GENERIC,RFLINK) in the serial server plugin ?
What can i do with this stuff ?

regards
Klaus

Rampler

Hi, i try to get serial connection from FHEM to a serial homeautomation adapter(HMUART) I am using this device: http://www.raspifun.de/viewtopic.php?t=32 I use TX and RX pins. The lines are crossed. The device is connected with four pins, 3,3 V, GND, TX, RX. Baudrate, start and stopbit, and parity i...

Rampler

OK, a have done some further tests which the actuell firmware, no chance with the standard serial server. It doesnt matter if under tools the serial server is enabled or disabled. All references are welcome ....

regards
Klaus

Rampler

Hi, i an using WEMOS D1 mini with actuell firmware (v 2 dev 11). I try to use the serial server while using tx/rx, no success. I only get messages ser2net connected / disconnected. I have changed the tx/rx lines for testing many times... If i use the follwing plugin, my serial device is working. Wit...

Rampler

Hi,
i am using the pukse counter for my wind sensor.
i want to use the following formula:
(((%value%+2)/3)*3.6)/20

I still get only count values!
Is the syntax correct ?

Rampler

Hi Nick,
yes it is working fine now, thanks again..
Hopefully, this will find the way in the official version ..

best reagrds
Klaus

Rampler

Hi Nick,
ok, i will give it a try...
Many Thanks...

regards
Klaus

Rampler

Good to hear that it is possible !! I assume, you have done your own firmware, right ? I am using the last unstable R147 RC8. In my opinion, this should be changed in the offical firmware, like voltage settings (here you can choose, how many digits do you want to have). Is there a tool, which i can ...

Rampler

Also interesting would be, if anybody gets the whole values, including the digits after commata ?

Rampler

Hello together,
i am using Ultrasonic Sensor - HC-SR04 with WEMOS D1 mini V2 and ESPEasy R147 RC8.
In the log i see:

Code: Select all

1119107 : SR04 : Distance: 28.44

for example.
In the web interface, i get only integer values (28). Also via MQTT.
Is this a bug, or can i adjust it ?
regards
Klaus

Search found 95 matches