Let's Control It

Stuntteam

RFlink does not transmit F007 or any other weather station signals.. it only receives..! If you want to try a RX/TX module that is untested/unlisted then you should probably also get one of the listed modules for reference.. like the rbx6 or so. Make sure devices are not too far away when testing bu...

Stuntteam

Isnt that something you can easily change in Domoticz?

Stuntteam

Yeah, the first one is double.. but you are right..

Stuntteam

Go to the hardware tab, use the create manual device button listed behind rflink and add the device.. Here you enter a line that would normally show up in a rflink log like for example 20;04;TriState;ID=86a8aa;SWITCH=1;CMD=ON; Thus your 10;GPIOset;31;0;ON; needs to be converted to: 20;00;GPIOset;ID=...

Stuntteam

That is one of the reasons why we are taking time to rewrite and redo the code

Stuntteam

It would help if someone with a remote could make a log..

Stuntteam

Klopt, er is geen zend functie aanwezig in de pluggen..
dus druk je de knop dan kan er nooit terugmelding zijn naar rflink/domoticz enz.

Stuntteam

Various elements are in progress but we are not ready for a release yet

Stuntteam

There are various solutions. The main rule is that you need to use a solution that transmits data in a format RFLink understands. A good start is probably to use something like this: https://github.com/deberman/OS_V2.1_temp-hum_sensor Thdere are many more solutions out there. It all depends on what ...

Stuntteam

Yes, you can use rflink to push the buttons
Use the mini gpio function and connect the io pins to the remote...

Alternative is that you hack the remote and extract the keyloq key

Stuntteam

On the link posted earlier there are alternatives for the Aurel transceiver.. Using an RXB6 you can build the full thing (including Arduino Mega and NRF) for less than 10 euro's! There is no priority for CC1101 support. I rather have more devices supported and add more powerfull modules than a CC1101.

Stuntteam

http://www.rflink.nl/blog2/devlist
(Keeloq) (Receive only!)

Guess what...

Stuntteam

The supported hardware is listed on this page: http://www.rflink.nl/blog2/wiring
There is no mention of and no support for the CC1101 at this time.

Stuntteam

The supported hardware is listed on this page: http://www.rflink.nl/blog2/wiring

Stuntteam

manuito wrote: ↑17 Oct 2018, 22:59
Should I start my project right now, and buy the only RfLink compliant tranceiver at all cost (Aurel, hard to find, and > 20€ !!!) ?

Yes.

manuito wrote: ↑17 Oct 2018, 22:59
Or I have missed it and you can already drive any 868 / FSK transceiver with RfLink, like the CC1101 ?

No.

Stuntteam

You need to enable ansluta.. if it detects the cc2500 all is fine, if it gives an error message then the cc2500 is not responding as expected.
Enabling is done with the rflink loader..

Stuntteam

Here you can find the list of devices that are known to be working: http://www.rflink.nl/blog2/devlist If your device is not on that list, it might or might not be supported. The only way to know for sure is test.. If you do not receive any data at all in a test, it is not supported due to a differe...

Stuntteam

I will re-measure with my device..

Stuntteam

Wiping the post is the worst way of dealing with new development in my opinion. Releasing under the RFlink name and posting about it in the announcements forum is in my opinion disrespectful. If anyone wants to change my mind or tell me I am an ass then do so via PM or email.. (frankzirrone@gmail.c...

Stuntteam

It has nothing to do with liking or disliking open source. Alternative versions makes development much harder for us due to unknown/unwanted changes in the code affecting timing etc. So it is more like quality control. It is one of the reasons we put a limitation on the distribution of the source co...

Stuntteam

The framework is open-source and thus available, it is all you need for plugin development.
However, the number of contributions can be counted on one hand. This obviously means there is no need for it.
The full sources are semi public, those who need it have access to it.

Stuntteam

Asked and answered before.. there will be updates when needed.
In the mean time we are improving and testing the code.

Stuntteam

You can also try the rffind option..
http://www.rflink.nl/blog2/faq#RFFind

Stuntteam

Merci

Stuntteam

Yes it is.. we have thousands of requests so it takes time..

Stuntteam

http://www.rflink.nl/blog2/wiring

Stuntteam

Did you check out Domoticz?
You can run it on Windows and it uses mysql

Stuntteam

You can make pretty much any code you want with the RFFind option.
Alternatively it is possible to extend the RFlink code, but so far noone needed it and noone bothered to send any debug logs or other info.

Stuntteam

looks like buttons a,b,c,d,e are corresponding to switch numbers 1,2,3,4,5

Stuntteam

reverse the dip setting / bits
eg. 00111 becomes 11100
take that as binary and turn into hexadecimal (in this case 0x1c)
and add 0x41 (0x41+ 0x1c = 0x5d)

Stuntteam

Try the rffind option

Stuntteam

the logged data is corrupted.. (rows are too short..)
make a new debug log and mail that to me.

Stuntteam

Most of it should be implemented and working.
If you experience any issues just make a debug log and mail that to me.

Stuntteam

This is not really useful for home automation systems since you will never know what state the device is in.
There are plenty of others that have proper distinctive ON and OFF commands.
You should probably tell others what set it is so that people can stay away from it.

Stuntteam

We are still working on it.. just not going crazy with releases.

Stuntteam

No, will not work.

Stuntteam

We have addded support for a bunch of models that have been tested so far..
we dont know yet if any model will work.
Time and testing will tell.

Stuntteam

They should be detected but you can also use the rffind feature to learn them

Stuntteam

Make a debug log of your original remote..
Push the up/down/my buttons
Put the debug data in a mail to me (frankzirrone@gmail.com)

Stuntteam

Just retry..?

Stuntteam

The normal operation is that the RFlink code cuts power from the receiver and powers up the transmitter when it is transmitting signals over RF.
However, you can also power the receiver directly and permanently.

Stuntteam

RTS werkt met een rolling code (die bij ieder commando veranderd). Die code word na de pairing met de ontvanger opgeslagen in het interne geheugen van de rflink en daarna bijgehouden. Door RTS clean te doen wis je die rolling code en kan je daarna niet bedienen. Opnieuw de pairing doen met dezelfde ...

Stuntteam

Nee hoor.. voorlopig doe je het zelf verkeerd.. dus er is nog niets te zeggen over de hardware

10;RTS;0100DD;0412;4;PAIR;
de 0100DD is een adres ..
10;RTS;0100FF;0;DOWN;
0100FF is een ander adres..

maw, je zegt tegen de RTS ontvanger dat je adres 0100DD bent..
en gaat vervolgens 0100FF gebruiken..

Stuntteam

Association (Pairing) mode is already supported for some X2D models.. We are working on others.

Stuntteam

Nee, je moet hem echt inleren bij de rts ontvanger.. dit doe je op dezelfde manier als met een rts remote.. dus o.a. de stappen in de handleiding volgen.

Stuntteam

There is a ping/pong mecahnism that Domoticz will use to see if RFlink is still alive.. This is only done when there is no other communication for some time. If this is your summer house and it would normally receive a temperature sensor.. it is possible that the sensor died (batteries) and that rfl...

Stuntteam

Wil je RTS gebruiken moet je RFLink met je ontvanger pairen.
staat her en der uitgebreide uitleg..

Stuntteam

Upon receival of signals it will display:
20;03;NewKaku;ID=0136e71e;SWITCH=1;CMD=ON;
to send a command manually you need to use
10;NewKaku;0136e71e;1;ON;

Stuntteam

The problem is probably the PIR. The obvious part is that when a PIR detects motion it sends a signal. However, less known is that there are various PIR's and also door/window contacts that repeat this signal for a duration up to 5 seconds. During that time the frequency is occupied and thus blocked...

Stuntteam

Make a debug log and send that to me..
Here are instructions on how to do that:
http://www.rflink.nl/blog2/development

Search found 773 matches