Let's Control It

riker1

ok thanks

riker1

Hi
how can I change the initial setting?

I would like to change 192.168.4.1

thanks T

riker1

Hi
I do not really understand what is the difference of those versions?

Thanks for explanations.

T

riker1

strangewise I checked my other one.
also a puya, but working with r147 not with v2.x

: IMG_20180121_111241.jpg (1.82 MiB) Viewed 5824 times

riker1

Hi
I am using r147 on ESP01 1M
I was not able to flash and boot a V2xx on an ESP-01
it was never starting up right with V2 for me

riker1

made a picture
see attachment

: IMG_20180121_085946.jpg (1.35 MiB) Viewed 5832 times

riker1

I do not see it clear , too small
yes i think so PUYA

riker1

How do i do this?

Flash real size: 1048576

Flash ide size: 1048576
Flash ide speed: 40000000
Flash ide mode: DOUT
Flash Chip configuration ok.

I can not read it, it is too small written

riker1

Hi I uploaded r147 1024 to an ESP01S. but it is not starting: no AP appears. what can I check? flash size is 1MB INIT : Booting Build nr:147 WIFI : No SSID! INIT : I2C INIT : SPI not enabled INIT : Boot OK INIT : Normal boot WD : Uptime 0 ConnectFailures 0 FreeMem 25592 WD : Uptime 1 ConnectFailures...

riker1

it is working with the resistor
perfect

i am wondering why they sell esp-01s with relais, how can this work?

riker1

Hi
I flashed ESP-01S device with R147.

flash worked .

after rebooting AP ESP_01 appeard.

But connectings keep get disconnecting.

Only once I could see config setup menue at 192.168.4.1

anyone having an idea how to stabilize this?

Thanks T

riker1

Hi

I have a GY-b11 connected via I2C.

but there is no humidity.

easy esp detected: BMP280
also via I2C scan.

Is this a known error?

Thanks for the help

T

riker1

The Reset pin is not necessary at all. I had some problems with flashing the ESP-01 in all versions now and then. So i do another procedure to flash: Prepare the ESP-01 for flashing without power !! (GPIO0 = low, GPIO2 = High). Power up the module and start the flashing process. When flashing and t...

riker1

ok thanks for clarification
will try a resistor between GPIO 0 and VCC

riker1

Try a 10K Resistor from 3.3V to GPIO0 to keep it high if it isn't on the board. A "Low" at boot time will not work as it puts the ESP8266 into flash mode. Hi do not understand this. https://www.letscontrolit.com/wiki/index.php/Configuration is saying it is always high at boot , so how can...

riker1

ok thanks for the info.

maybe you know this:

I have an ESP-01S relais .

but ESP is not booting when inserted, especially when GPIO0 is inserted.

Do not know how to solve this. Rules is too late, as they are handled after powering up, right?

riker1

Hi

thanks for the link.

but do not understand the default setting options so.

No funktion for GPIO 2 and 0 for example?

riker1

Hi

I tried to have default low for gpio 0.

so in hardware I said boot default low.
in device switch is defined normally, not pulled high.

but after reboot or new repowering, gpio is 1 high?

how can I avoid this?

thanks
T

riker1

done asked.

thanks

riker1

Hi

can the LED amount be configured somewhere?

Looks like hardcoded 20 LED to me in the plugin?

Thanks t

riker1

I have the board installed. I pulled current whole version from github - first: this is not compiling on 2.4.0 only 2.3.0 event stated in code: #include "core_version.h" #ifndef ARDUINO_ESP8266_RELEASE_2_3_0 #error ESPEasy v2.0 only support Arduino core 2.3.0. (Use the ESPEasy development ...

riker1

you where right, it is a torture always strange new errors showing up n file included from C:\Users\xxx\Documents\Arduino\libraries\SD\src/utility/Sd2Card.h:26:0, from C:\Users\xxx\Documents\Arduino\libraries\SD\src/utility/SdFat.h:29, from C:\Users\xxx\Documents\Arduino\libraries\SD\src/SD.h:20, \E...

riker1

I use a "portable" install of Arduino, but you may have to look for your own sketchbook directory and extract the files in the RAR file (including the "library" directory) into that sketchbook dir. So then you have sketchbook\libraries sketchbook\ESPEasy sketchbook\ESPEasy\lib J...

riker1

If you are trying to build ESPeasy from the Arduino IDE (My advice: don't torture yourself, don't do it), you have to copy everything from the Github into a directory called "ESPEasy" (case sensitive) Thus: ESPEasy with all the files from src directly in there ESPEasy\lib with all the fil...

riker1

vader wrote: ↑12 Jan 2018, 17:46 2.3.0 seems to be stable. I compile with 2.4.0+ with no errors. So there must be something wrong in your config.

ok .

thanks for your support.

will probalbly have to reinstall everything....

riker1

think I will better downgrad to board 2.3.0... does not help: same issues: WARNUNG: Kategorie 'LED' in der Bibliothek CHT16K33 LED Matrix Library ist ungültig und wird auf 'Uncategorized' festgelegt WARNUNG: Kategorie 'Input' in der Bibliothek MechInputs ist ungültig und wird auf 'Uncategorized' fes...

riker1

updated Board to 2.4.0.rc2 error disappeard, but new once appeard. WARNING: Category 'LED' in library CHT16K33 LED Matrix Library is not valid. Setting to 'Uncategorized' WARNING: Category 'Input' in library MechInputs is not valid. Setting to 'Uncategorized' WARNING: Category 'Input' in library Ser...

riker1

but still I have the problem

Have lib lwip in Arduino/library/lwip/tcp_impl.h

but is not found?

driving me crazy...

where should the library be?

riker1

vader wrote: ↑12 Jan 2018, 16:15 With ESP8266 from the board manager (core 2.3) there should be V2, Espressiv and V1.4 selectable.

maybe I am on core 2.4.0. already. is this a problem?

and I not not find a Espressiv library?

riker1

No I found one 1.4.1 esp-lwip
extracted lwip into library folder.
restarted Arduino
but still have the error file not found?

where does this library has to be?

Thanks

riker1

vader wrote: ↑12 Jan 2018, 15:13 That's with lwip v2. Select v1.4 or Espressif in Arduino...

HHi,

in Arduino IDE there is only V2 and V2.0.3 available not 1.4

riker1

ok thanks, will check the library

btw: it is not included in the lib folder in src.

Just wanted to change the number of LEDs in Candle.

This is fix coded.

riker1

Hi
treid to compile esp easy.

pulled sources from github

but always have the error

lwip/tcp_imp.h not flund, even I copied it manualy into source folder

What am I doing wrong?

Thanks T

riker1

Hi I use a level control device triggered by a switch - PIR. Have a PIR attachted on D5 GPIO14 an Control switch listening for D5 switching D8 Gpio 15: set level 1 hysteresis 0 But logic is inverse. When PIR is 1 Level Control is 0 and vice versa. Did I miss anything? running v2- test-12 on Lolin No...

riker1

Error log while booting after flashing : v2.0.0-dev12 INIT : Booting version: v2.0.0-dev12 INIT : Warm boot #72 FS : Mounting... FS : Mount successful, used 1255 bytes of 113201 RESET: Resetting factory defaults... RESET: Warm boot, reset count: 3 RESET: Too many resets, protecting your flash memory...

riker1

Hi
thanks
setting to standalone and back solved it.

riker1

Hi

I have fhem as controller entered.

I had to change the port, but when submitting, the old port is retained.

I can not delete the controler.

How can I update the port settings?

Thanks T

riker1

Hi
followed the tutorial and implemented an virtual sensor as switch in domoticz.
in esp vonfig there is a switch defined with gpiox
I mapped the idx from domotic to the device.

but switching is not woring.

did I miss anything?
Thanks

running v200-normal12

riker1

Yes, it is the black version. Can flash the r147 with 1024 kb Having a similar flashed with R147: core version is 2_3_0 Flash Size: 1024 kB Flash Writes (since boot): 0 Sketch Size/Free: 421 kB / 516 kB after flashing there is not the normal AP ESP01 available but AP_ mac address look alike . can co...

riker1

Hi
having a ESP-01 1 MB storage.

Tried to flash firmware version: r200dev12
Flash worked but ESP-01 is not booting up correct.

any known issues here?

Version R147 is working. But require more controls like in V2

Thanks t

riker1

Hi
thanks it worked.

Is it possible to deactivate the AP fallback mode?

thanks T

riker1

ok thanks understood, will check.

riker1

Hi

how can I send status field to thingspeak.

same for location?

where do I have to enter
- fields IDS to send multiple fields
- and channel id write key kombination?

thanks t

riker1

Hi
the esp is still booting into ap mode. but I want the normal wifi mode.
How can this be changed?

Thanks

Search found 344 matches