Search found 87 matches
- 12 Aug 2019, 12:02
- Forum: ESP Easy: General Discussion
- Topic: config.dat - is it forward compatible?
- Replies: 1
- Views: 6864
config.dat - is it forward compatible?
If I backup a device's config.dat and then upgrade espeasy, will the config.dat import without issues or is it release dependent? For example - say a device is using mega-20190305 and I backup the config.dat. deviceX (mega-20190305) -> config.dat(mega-20190305) Next I upgrade to mega-20190809. mega-...
- 09 Aug 2019, 23:19
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] MQTT - Failed to connect to broker
- Replies: 6
- Views: 23846
Re: MQTT - Failed to connect to broker
TD-er, ThomasB Thank you for looking at this the problem was with the mosquitto configuration file. I got a copy of dynamicdave's configuration file and once I put that in, it started working. I was not using userid and passwords and I think the missing 'allow_anonymous true' might have been the iss...
- 09 Aug 2019, 22:25
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] MQTT - Failed to connect to broker
- Replies: 6
- Views: 23846
Re: MQTT - Failed to connect to broker
Just found another clue. I went and looked at the mosquitto log on the pi (/var/log/mosquitto/mosquitto.log) and I see this 1565375291: New connection from 192.168.48.42 on port 1883. 1565375291: Socket error on client <unknown>, disconnecting. 1565375321: New connection from 192.168.48.29 on port 1...
- 09 Aug 2019, 13:04
- Forum: ESP Easy: General Discussion
- Topic: Any way to restore config.dat automatically?
- Replies: 8
- Views: 10052
Re: Any way to restore config.dat automatically?
Will do.If you cannot find another way of uploading this file, can you make an issue for it on GitHub?
Had to put this on a back burner for a bit due to family issues (argue, the grandkids have invaded ) and an issue with MQTT (another thread).
- 09 Aug 2019, 12:53
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] MQTT - Failed to connect to broker
- Replies: 6
- Views: 23846
[SOLVED] MQTT - Failed to connect to broker
Up to a couple weeks ago, all my ESPEasy devices were working fine but suddenly they are all failing to connect to my local MQTT brokers (using either the hostname or the IP) with the error: 15651: MQTT : Intentional reconnect 15713: MQTT : Failed to connect to broker All devices work fine when conn...
- 01 Aug 2019, 01:03
- Forum: ESP Easy: General Discussion
- Topic: Any way to restore config.dat automatically?
- Replies: 8
- Views: 10052
Re: Any way to restore config.dat automatically?
Thomas, thanks for the suggestions! I'll try them over the next few days. I thought I was going to have the whole week free but turns out my daughters family is back tonight from camping and that means I'll be invaded by grandkids tomorrow (grin-smile)
- 31 Jul 2019, 10:29
- Forum: ESP Easy: General Discussion
- Topic: Any way to restore config.dat automatically?
- Replies: 8
- Views: 10052
Re: Any way to restore config.dat automatically?
That doesn't help. Here is how I tested
1) from tools did a backup of the configuration
2) deleted the two controlers I had - rebooted
3) used curl to load the config.dat file - rebooted
4) controlers missing
5) loaded config.dat via tools - controlers showed up with out a reboot
Any other ideas?
1) from tools did a backup of the configuration
2) deleted the two controlers I had - rebooted
3) used curl to load the config.dat file - rebooted
4) controlers missing
5) loaded config.dat via tools - controlers showed up with out a reboot
Any other ideas?
- 30 Jul 2019, 12:56
- Forum: ESP Easy: General Discussion
- Topic: Any way to restore config.dat automatically?
- Replies: 8
- Views: 10052
Re: Any way to restore config.dat automatically?
I've been trying to figure out what a post would look like. For all the other files I use curl in this form "curl -v -F upload='@path-to-file/rules1.txt' http://192.168.48.29/upload" and it works fine but the config.dat doesn't. Even though it looks like it works, the settings don't change...
- 29 Jul 2019, 22:15
- Forum: ESP Easy: General Discussion
- Topic: Any way to restore config.dat automatically?
- Replies: 8
- Views: 10052
Any way to restore config.dat automatically?
I'd like to build an backup/restore for all the settings in ESPEasy. Currently I've created a backup of all the parts (config.dat, security.dat, rules1-4.txt) and restore for everythiong but config.txt. It seems the only way is to open ESPEasy on the device, go to tools, select upload, pick the file...
- 02 Apr 2019, 19:28
- Forum: ESP Easy: General Discussion
- Topic: Any way to check if a device exists - in a rule?
- Replies: 6
- Views: 3568
Re: Any way to check if a device exists - in a rule?
Hmmm, I'm going to have to ponder that idea. Thanks!
- 02 Apr 2019, 16:07
- Forum: ESP Easy: General Discussion
- Topic: Any way to check if a device exists - in a rule?
- Replies: 6
- Views: 3568
Re: Any way to check if a device exists - in a rule?
Yes, the bmp280 reports temperature and pressure but not humidity, so I have a dht22 connected also. With the if statements it would grab the temp and humidity from the dht22 then overwrite the temperature and add the pressure from the bmp280. Myself and another guy are building DIY weather reportin...
- 02 Apr 2019, 14:04
- Forum: ESP Easy: General Discussion
- Topic: Any way to check if a device exists - in a rule?
- Replies: 6
- Views: 3568
Re: Any way to check if a device exists - in a rule?
That's great idea except ift the bme280 triggers then the dht22 triggers, the readings from the bme280 will be overwritten and I'll get the dht22 readings. Getting the bme280 readings are better than the dht22 readings.
- 02 Apr 2019, 13:22
- Forum: ESP Easy: General Discussion
- Topic: Any way to check if a device exists - in a rule?
- Replies: 6
- Views: 3568
Any way to check if a device exists - in a rule?
trying to write a generic set of rules to report temperature, humidity and pressure. The idea is to install this on several devices but I won't know if a dht22, ds18b20, bmp280 or bme280 is installed and it is possible more than one is installed. Right now I have: if [dht22#temperature] > 0 TaskValu...
- 01 Apr 2019, 00:19
- Forum: ESP Easy: General Discussion
- Topic: Are Location settings avaliable in rules?
- Replies: 3
- Views: 3081
Re: Are Location settings avaliable in rules?
Any thoughts to making them avaliable to rules? Since they are already stored in memory anyways...
- 31 Mar 2019, 19:47
- Forum: ESP Easy: General Discussion
- Topic: Rules - i have problem.
- Replies: 1
- Views: 1683
Re: Rules - i have problem.
take a look at this thread viewtopic.php?f=4&t=6586 it may help you debug and give you insight to your problem
- 31 Mar 2019, 19:30
- Forum: ESP Easy: General Discussion
- Topic: Are Location settings avaliable in rules?
- Replies: 3
- Views: 3081
Are Location settings avaliable in rules?
If you go to Tools->Advanced->Location Settings you can enter the Latitude and Longitude. Is there a way to use them in rules? If not, what are they used for??
- 31 Mar 2019, 19:03
- Forum: ESP Easy: General Discussion
- Topic: How to DEBUG your RULES
- Replies: 2
- Views: 2856
How to DEBUG your RULES
Here is my method for debugging RULEs while I'm developing and I hope it helps some people out. First thing is to add a 'Generic - Dummy Device', name it 'data' and name one of the variables 'debug'. For our example, let's assume you select device 12 and named the first variable 'debug' . Now in you...
- 21 Mar 2019, 01:34
- Forum: ESP Easy: General Discussion
- Topic: Re-run initial WiFi setup
- Replies: 4
- Views: 2938
Re-run initial WiFi setup
Is it possible to re-run the initial WiFi setup? I've been searching and can't find anything on it. Here's my idea: I want to setup a couple devices with a bunch of sensors and rules and then give them to a some friends. The problem is they each have a different SSID/passphrase and I'd like to make ...
- 05 Mar 2019, 20:59
- Forum: ESP Easy: General Discussion
- Topic: [solved] Are any math functions usable in rules?
- Replies: 11
- Views: 8276
Re: Are any math functions usable in rules?
Ahh but that doesn't address my issue ie I need to range 1-60 to 1-12 ie i can grab %sysmin% and it the time is 3:04 then the 04 should be ranged to 1 while 3:05 will range to 2 If I use the formula mm+5/5 and could truncate the decimal portion I would be fine Wait, I found an answer. I was using th...
- 05 Mar 2019, 20:10
- Forum: ESP Easy: General Discussion
- Topic: [solved] Are any math functions usable in rules?
- Replies: 11
- Views: 8276
[solved] Are any math functions usable in rules?
Here is my situation. I have a 12 LED ring to be used as a clock. What I want to do is light an led based on the minutes. With the 12:00 o'clock position being led 1, 1 o'clock position is led 2, 2 o'clock position is led 3 etc, Between hh:00 and hh:04 led 1 should be lit, between hh:05 to hh:09 led...
- 04 Jan 2019, 18:51
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Re: Fallback SSID
I'll give that a try, but it's not in the list at https://www.letscontrolit.com/wiki/inde ... _Reference
- 04 Jan 2019, 18:36
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Re: Fallback SSID
yeah, I know I can do at the router, and being tech savy I can do it, but I don't want to have to explain to my son, over the phone how to do it on his router or anyone else if I give one to someone else. I also know that the device will work eithor place because it will be 'given' an IP address, bu...
- 04 Jan 2019, 14:37
- Forum: ESP Easy: Software
- Topic: How to set ESP GW (gateway) via commands
- Replies: 1
- Views: 1591
How to set ESP GW (gateway) via commands
While it IS possible to set the IP address via rules, there doesn't seem to be a way to set the gateway. I have two locations I want to use a device AND I want the device to have a particular last section of the IP. For example, for the primary SSID I want the address to be 10.0.0.19 on the fallback...
- 04 Jan 2019, 12:58
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Re: Fallback SSID
Let me ask you this: Is there a way to define an IP address for the device when the base SSID address might be different. For example, say I want the device to have a fixed IP nnn.nnn.nnn.19 but my primary SSID hands out 10.0.0.nnn address and my fallback SSID hands back IP of 192.168.1.nnn? I was w...
- 04 Jan 2019, 12:50
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Re: Fallback SSID
Is there any way to mark this 'solved'? I was going to change the topic to 'Fallback SSID [solved] but can't seem to find a way to do it.
- 04 Jan 2019, 12:35
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Re: Fallback SSID
That will be great and maybe save someone eles from pulling their hair out like I did
- 04 Jan 2019, 12:30
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Re: Fallback SSID
I assume you mean in ESPeasy. Syslog IP: blank Syslog Level: None Syslog Facility: Kernel Serial log Level: None Web log Level: Info I just changed Serial log Level to 'Info' and now I see: INIT : Booting version: mega-20181231 (ESP82xx Core 2_4_2, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 PUYA support)...
- 04 Jan 2019, 12:01
- Forum: ESP Easy: Software
- Topic: Fallback SSID
- Replies: 13
- Views: 7879
Fallback SSID
device: WeMos D1 mini espeasy: mega-20181231 macOS 10.13.6 Arduino IDE 1.8.8 I have set the D1 mini with a primary SSID (helmsdeep) and a fallback SSID (Mines of Moria). When I boot the device and watch the serial monitor in the Arduino IDE and I see: INIT : Booting version: mega-20181231 (ESP82xx C...
- 04 Jan 2019, 00:21
- Forum: ESP Easy: General Discussion
- Topic: no wifi (esp_0) after flash on S20
- Replies: 35
- Views: 38519
Re: no wifi (esp_0) after flash on S20
I use the CP2102 moduls USB-TTL connecter and plug the four pins to the correct header points on the S20.
One thing I discovered is that (for me) using the S20's
– S20's with versions < v1.3 - I need to connect TX-RX and RX-TX
– S20's with versions v1.3+ – I need to connect TX-TX and RX-RX.
One thing I discovered is that (for me) using the S20's
– S20's with versions < v1.3 - I need to connect TX-RX and RX-TX
– S20's with versions v1.3+ – I need to connect TX-TX and RX-RX.
- 16 Dec 2018, 12:07
- Forum: ESP Easy: Software
- Topic: mqtt / use hostname option doesn't work on LAN / Mega32
- Replies: 10
- Views: 7102
Re: mqtt / use hostname option doesn't work on LAN / Mega32
Good News, I just upgraded to the ESP_Easy_mega-20181214_normal_ESP8266_4096.bin and it is now WORKING!!!
- 16 Dec 2018, 11:46
- Forum: ESP Easy: Software
- Topic: mqtt / use hostname option doesn't work on LAN / Mega32
- Replies: 10
- Views: 7102
Re: mqtt / use hostname option doesn't work on LAN / Mega32
I'm having the same issue when I use the hostname it never connects. My use case: I'm developint a plant monitoring system using a rpi zero w and Node-RED. The pi runs the mqtt broker. I have a Wemos D1 min running ESPeasy. If I specify the IP address in ESPeasy it works fine, but I want to use the ...
- 08 Nov 2018, 20:17
- Forum: ESP Easy: Software
- Topic: [solved] Error: Either fill all IP settings fields or leave all empty
- Replies: 2
- Views: 2215
Re: Error: Either fill all IP settings fields or leave all empty
Dang, you're right! I didn't fill in the 'ESP DSN' (Now how did I miss that) I've filled it in for all my other devices.
Oh well , live and learn.
THANKS!
Oh well , live and learn.
THANKS!
- 08 Nov 2018, 15:43
- Forum: ESP Easy: Software
- Topic: [solved] Error: Either fill all IP settings fields or leave all empty
- Replies: 2
- Views: 2215
[solved] Error: Either fill all IP settings fields or leave all empty
device: WeMos D1 mini espeasy: mega-20181025 Got an OLED sheild (64x48 - Driver IC: SSD1306 IIC address: 0x3C or 0x3D) and plugged it into the wemos. In 'Devices' I added it as a 'Display - OLED SSD1306' - Enabled - I2C Address: 0x3C (60) - (default) Display Size: 68x48 When I hit save a red bar app...
- 06 Sep 2018, 11:45
- Forum: ESP Easy: Projects / Applications
- Topic: moisture sensor
- Replies: 78
- Views: 74352
Re: moisture sensor
@manjh - I've been using that capacitive sensor for a week now with no problem. I use it with a WeMos and have it connected to 5V, GND and A0. Under 'Devices' I added an 'Analog Input - Internal' and enabled the device and send the data to the controller. Then I watched the log to get the 'dry' read...
- 19 Jul 2018, 19:00
- Forum: ESP Easy: General Discussion
- Topic: (FIXED) can not validate json output
- Replies: 3
- Views: 2339
Re: (FIXED) can not validate json output
Well thank you very much indeed!
- 19 Jul 2018, 13:54
- Forum: ESP Easy: General Discussion
- Topic: (FIXED) can not validate json output
- Replies: 3
- Views: 2339
Re: (BUG?) can not validate json output
Yeah!! it is working in the mega-20180719 build!
- 19 Jul 2018, 01:53
- Forum: ESP Easy: General Discussion
- Topic: (FIXED) can not validate json output
- Replies: 3
- Views: 2339
(FIXED) can not validate json output
GIT Version: mega-20180714 I go to Tools->Show JSON copy it and then try to validate it using one of the online validators like https://jsonlint.com and it says there is an error. Here is the JSON {"System":{ "Build":20102, "Git Build":"mega-20180714", "S...