Search found 96 matches
- 12 Oct 2015, 19:43
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295574
Re: ESP Easy Releases
I Use the same setup to program R20 and everthing is fine with the R20, evrything else give garbish. When I make a reset or power off /on I only get garbish, and nothing more is happing. I use esp-12 not a ESP-12E and it was programmed with R20 først. I have tryed to instal modelua that works fine t...
- 12 Oct 2015, 14:18
- Forum: ESP Easy: Software
- Topic: Need a Build R20 With all
- Replies: 6
- Views: 5794
Need a Build R20 With all
Need a Build R20 with all the goods up to Build (Last one)
- 12 Oct 2015, 13:45
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
Now i have tried R37 or??? 36.
And it still the same.
And it still the same.
- 12 Oct 2015, 13:34
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295574
Re: ESP Easy Releases
I am still getting this. ªU PID:1073742313 Version:1074852416 INIT : Incorrect PID or version! RESET: Cold boot ets Jan 8 2013,rst cause:4, boot mode:(1,7) wdt reset r$ Nothing happens when I connect RX and TX and then reboot the modul. When i reboot the modul, soo how about to get that solved first...
- 12 Oct 2015, 13:17
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295574
Re: ESP Easy Releases
Isen't you one behind in the build number????
- 10 Oct 2015, 12:03
- Forum: ESP Easy: Hardware
- Topic: PWM, Value 1 to 5 flashes
- Replies: 4
- Views: 3991
- 10 Oct 2015, 12:01
- Forum: ESP Easy: General Discussion
- Topic: what's coming? and some ideas
- Replies: 25
- Views: 23220
Re: what's coming? and some ideas
Start by reading the wiki, many of youre is there.
- 10 Oct 2015, 10:53
- Forum: ESP Easy: Hardware
- Topic: PWM, Value 1 to 5 flashes
- Replies: 4
- Views: 3991
- 09 Oct 2015, 13:07
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295574
Re: ESP Easy Releases
Its look like its R30 on the github??
Cant you make a README.MD file with the Version number?
Cant you make a README.MD file with the Version number?
- 07 Oct 2015, 10:28
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
Its running with R20 for now.
But its strange is that the first (Called esp120) is running R29
But this one i call 121 can' t run R29, but is now running R20
But its strange is that the first (Called esp120) is running R29
But this one i call 121 can' t run R29, but is now running R20
- 06 Oct 2015, 18:19
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
It work with R20, now i have flash it with R29, and get this when i boot it up.
1074852416
INIT : Incorrect PID or version!
Reset!
FLASH: Erase ok
FLASH: Erase ok
ets Jan 8 2013,rst cause:4, boot mode:(3,7)
wdt reset
ets_main.c
1074852416
INIT : Incorrect PID or version!
Reset!
FLASH: Erase ok
FLASH: Erase ok
ets Jan 8 2013,rst cause:4, boot mode:(3,7)
wdt reset
ets_main.c
- 06 Oct 2015, 18:09
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
Yes with R20 its work.
But anoter ESP12 Modul and this moduel is from the same store
The first one, was fine, but not the other.
I will try to flash it with R29 when i have set it up, i R20
But anoter ESP12 Modul and this moduel is from the same store
The first one, was fine, but not the other.
I will try to flash it with R29 when i have set it up, i R20
- 06 Oct 2015, 12:47
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
No help to get?
- 04 Oct 2015, 21:34
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
I flash Nodemcu to it by the firmware uploader program, thats works.
But not with the Arduino IDE
But not with the Arduino IDE
- 04 Oct 2015, 21:19
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Re: Error when flashing esp-12 modul
What do you meen?
- 04 Oct 2015, 17:50
- Forum: ESP Easy: Hardware
- Topic: Factory reset
- Replies: 6
- Views: 11744
Re: Factory reset
Thanks
- 04 Oct 2015, 17:49
- Forum: ESP Easy: General Discussion
- Topic: Error when flashing esp-12 modul
- Replies: 10
- Views: 7787
Error when flashing esp-12 modul
When i try to flash to off my esp-12 modules i cot a error. Flashing i ok, I reboot and on the seriel console this comes ªU1073873385 1074852416 INIT : Incorrect PID or version! Reset! FLASH: Erase ok FLASH: Erase ok ets Jan 8 2013,rst cause:4, boot mode:(1,6) wdt reset I dont know and ant findt thi...
- 04 Oct 2015, 10:02
- Forum: ESP Easy: Hardware
- Topic: Factory reset
- Replies: 6
- Views: 11744
Factory reset
Hi how about explaning how to do this in the wiki
Added option to do a factory reset by connecting RX and TX pins during boot.
Is et rust to connect it to a computer.
To gnd.
Together?
Or???
Added option to do a factory reset by connecting RX and TX pins during boot.
Is et rust to connect it to a computer.
To gnd.
Together?
Or???
- 03 Oct 2015, 01:00
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Nice thanks for the good work
- 30 Sep 2015, 21:05
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Yes i know, but can it bee uses as a mix, input and outputs.
- 30 Sep 2015, 13:25
- Forum: ESP Easy: Software
- Topic: ESPEasy current problems and ideas
- Replies: 10
- Views: 9665
- 28 Sep 2015, 20:08
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Can that be changes?
Can we use them as Input and Output, 1 as input, 2, 3 and 4 as output and 8 as input ex.
Can we use them as Input and Output, 1 as input, 2, 3 and 4 as output and 8 as input ex.
- 28 Sep 2015, 12:12
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Hamster, do you use pullup res?
- 27 Sep 2015, 22:36
- Forum: ESP Easy: Software
- Topic: Drops MQTT/mosquitto connection on wifi router reboot.
- Replies: 2
- Views: 3578
Re: Drops MQTT/mosquitto connection on wifi router reboot.
How you set at ip to the mac add in your router?
A router renew the connection every 24 hours normal.
A router renew the connection every 24 hours normal.
- 27 Sep 2015, 22:33
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Yes there is some thing rung there, it's the same is you use GPIO
I try to use it to see if a door is open or closed. (Gpio? to gnd) with or without a pull up res.
I try to use it to see if a door is open or closed. (Gpio? to gnd) with or without a pull up res.
- 27 Sep 2015, 14:18
- Forum: Introduce yourself
- Topic: Lars from Sweden
- Replies: 3
- Views: 3534
Re: Lars from Sweden
Hi
Yes i had look at openhab, but is not that easy like Domoticz iam using now.
Yes i had look at openhab, but is not that easy like Domoticz iam using now.
- 25 Sep 2015, 23:40
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16532
Re: reed relais
On ESP12 use 12,13,14 and 16, but remember ESP moduls are 3v3 and DO NOT USE 5V IT WILL KILL IT.
- 25 Sep 2015, 19:49
- Forum: Introduce yourself
- Topic: Hi from Me
- Replies: 3
- Views: 3535
Re: Hi from Me
I Know The first "computer" my father and i made was a SDK85
And the first i board was a sinclare ZX80
Then ZX81, Spectrum, Lamda, C64, RC802, Artari PC, with 640KB ram, 3,5" floppy drev and EGA mono screen and the vild thing, a 10MB Harddrive
And the first i board was a sinclare ZX80
Then ZX81, Spectrum, Lamda, C64, RC802, Artari PC, with 640KB ram, 3,5" floppy drev and EGA mono screen and the vild thing, a 10MB Harddrive
- 25 Sep 2015, 19:46
- Forum: ESP Easy: Hardware
- Topic: More than on DS18b20 on a string.
- Replies: 14
- Views: 16343
Re: More than on DS18b20 on a string.
Nice, keep up the good work
- 25 Sep 2015, 19:44
- Forum: Introduce yourself
- Topic: Hi all
- Replies: 7
- Views: 6623
Re: Hi all
I have postet a link that shows the moduls
- 25 Sep 2015, 11:58
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16532
Re: reed relais
Bye the way love Domoticz
Keep op the good work with that
Keep op the good work with that
- 25 Sep 2015, 11:55
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16532
Re: reed relais
Just ask and i will try to answer the best I can
ESP-12 you can bye on aliexpress.com (bye the converter print to) The ESP-12 module has 1mm spacing, and that is not to use, soo bye the converter print also
ESP-12 you can bye on aliexpress.com (bye the converter print to) The ESP-12 module has 1mm spacing, and that is not to use, soo bye the converter print also
- 25 Sep 2015, 10:40
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16532
Re: reed relais
Just made this quick.
- 25 Sep 2015, 10:07
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16532
Re: reed relais
Give me some days, and i can make a diagram.
Is it 230V ac or just some buttons on a remote control?
Is it 230V ac or just some buttons on a remote control?
- 25 Sep 2015, 10:05
- Forum: Introduce yourself
- Topic: Hi all
- Replies: 7
- Views: 6623
- 25 Sep 2015, 01:19
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16532
Re: reed relais
Yes it is, but i will use a optocopler, i use it to trigger my canon 1200D (as a remote for the camera)
- 24 Sep 2015, 23:20
- Forum: Introduce yourself
- Topic: Hi from Me
- Replies: 3
- Views: 3535
Hi from Me
Hi My name is Allan, i am 47 years old (Yes from the time where there ware no computers :-), i live in Denmark (So sorry for my English). I have 3 RPI B+ and 3 ESP-12 (Now running ESPEasy) and i think about 5 ESP-01 modules and a BPI M1 :-) 2 RPI runs kodi, and the 3ed runs Domoticz. I am not that g...
- 24 Sep 2015, 23:06
- Forum: ESP Easy: General Discussion
- Topic: list of control commands
- Replies: 2
- Views: 3384
Re: list of control commands
Nice but how about the ons you can send by http?
- 24 Sep 2015, 13:21
- Forum: ESP Easy: General Discussion
- Topic: list of control commands
- Replies: 2
- Views: 3384
list of control commands
Hi
Can you make a list of control commands in the wiki pages
Nice work you are doing
Can you make a list of control commands in the wiki pages
Nice work you are doing
- 23 Sep 2015, 20:58
- Forum: ESP Easy: Hardware
- Topic: More than on DS18b20 on a string.
- Replies: 14
- Views: 16343
More than on DS18b20 on a string.
Hi again
Is it possibly to have more than one DS18B20 on a string.?
Is it possibly to have more than one DS18B20 on a string.?
- 23 Sep 2015, 14:12
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
When you use the MCP23017 as inputs, is the internel pullup enabled?
- 20 Sep 2015, 23:10
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Nice.
How about updating the wiki with it.
How about updating the wiki with it.
- 20 Sep 2015, 12:36
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
Re: How to use the MCP23017
Nice and thanks for the quick answer.
Keep up the good work
By the way if you put one more MCP23017 on it but with another add, will you then get more in/outs??
Keep up the good work
By the way if you put one more MCP23017 on it but with another add, will you then get more in/outs??
- 18 Sep 2015, 21:25
- Forum: ESP Easy: Hardware
- Topic: How to use the MCP23017
- Replies: 17
- Views: 13815
How to use the MCP23017
Hi How do i use the MCP23017 to output from Domoticz?? I like the MCP23017 Port B0 to on/off a led, by activate a switch on Domoticz This is my setup i easyesp Task Settings Value Device: MCP23017 input Name: Power Port: 9 IDX / Var: 5 <- From the Domoticz. Formula Switch: What is Formula Switch: to...
- 14 Sep 2015, 11:41
- Forum: ESP Easy: General Discussion
- Topic: Trying to compile ESPEasy R020
- Replies: 4
- Views: 5745
Re: Trying to compile ESPEasy R020
Found out
- 13 Sep 2015, 22:21
- Forum: ESP Easy: General Discussion
- Topic: Trying to compile ESPEasy R020
- Replies: 4
- Views: 5745
Trying to compile ESPEasy R020
Hi I am trying to compile ESPEasy R020 to mu ESP-12 modul. But i get this Error: Arduino: 1.6.5 (Windows 8.1), Board: "NodeMCU (ESP8266 ESP-12 Module), 80 MHz, 115200" ESPEasy.ino: In function 'void loop()': ESPEasy:367: error: 'sprintf_P' was not declared in this scope Controller.ino: In ...