Search found 344 matches
- 05 Jan 2019, 12:54
- Forum: ESP Easy: Software
- Topic: timer store into dummy device timer state timerstop
- Replies: 11
- Views: 5753
Re: timer store into dummy device timer state timerstop
PS timerstop. did not find any reference in WIKI? Seen here: https://www.letscontrolit.com/forum/viewtopic.php?f=6&t=5841&p=31646&hilit=timer+disable#p31646 Timer,1,0 //disable the timer ?? Sorry do not undertand your hint. question: timerstop and timerstart is this an event? - refering...
- 05 Jan 2019, 11:04
- Forum: ESP Easy: Software
- Topic: timer store into dummy device timer state timerstop
- Replies: 11
- Views: 5753
timer store into dummy device timer state timerstop
Hi you can I store the timer state - seconds - into a dummy variable? Is timer state available somewhere? Dummy is having 4 values now? Will that work: TaskValueSet 10,2,[timer1] PS timerstop. did not find any reference in WIKI? How is timerstop referenced to a timer having more than 1. Thanks T
- 30 Dec 2018, 11:28
- Forum: ESP Easy: Software
- Topic: esp going into AP mode instead of STA reconnecting
- Replies: 5
- Views: 3459
Re: esp going into AP mode instead of STA reconnecting
looks like it is working,
but hard to test because after the event appears there is not way to control it....
do you have a good idea of an tst setup?
- Tested it with serial connection and it is working
Thomas
but hard to test because after the event appears there is not way to control it....
do you have a good idea of an tst setup?
- Tested it with serial connection and it is working
Thomas
- 19 Dec 2018, 09:10
- Forum: ESP Easy: Software
- Topic: esp going into AP mode instead of STA reconnecting
- Replies: 5
- Views: 3459
- 18 Dec 2018, 14:27
- Forum: ESP Easy: Software
- Topic: esp going into AP mode instead of STA reconnecting
- Replies: 5
- Views: 3459
Re: esp going into AP mode instead of STA reconnecting
Hi
between
Ch:8 (-64dBm) WPA2/PSK
and
Ch:8 (-73dBm) WPA2/PSK
up to
Ch:10 (-83dBm) WPA2/PSK
Having some routers with same ssid
strange is, it was working fine for some time and now I have a lot of reconnects....
is there an event to reboot if AP mode is started?
between
Ch:8 (-64dBm) WPA2/PSK
and
Ch:8 (-73dBm) WPA2/PSK
up to
Ch:10 (-83dBm) WPA2/PSK
Having some routers with same ssid
strange is, it was working fine for some time and now I have a lot of reconnects....
is there an event to reboot if AP mode is started?
- 18 Dec 2018, 09:33
- Forum: ESP Easy: Software
- Topic: esp going into AP mode instead of STA reconnecting
- Replies: 5
- Views: 3459
esp going into AP mode instead of STA reconnecting
Hi
having trouble with some ESP.
They do not reconnect to WIFI but go into AP mode.
How can I avoid this or create a rule that the only go to Station Mode and try reconnecing or rebooting?
Thanks Thomas
having trouble with some ESP.
They do not reconnect to WIFI but go into AP mode.
How can I avoid this or create a rule that the only go to Station Mode and try reconnecing or rebooting?
Thanks Thomas
- 11 Dec 2018, 22:34
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
Re: ESP Easy Flasher
...ups solved..
user error.
strangewise the extention ini was not shown and file was
serialcommand.txt.ini
now having the file without ini it is working.
Sorry
Thomas
user error.
strangewise the extention ini was not shown and file was
serialcommand.txt.ini
now having the file without ini it is working.
Sorry
Thomas
- 11 Dec 2018, 22:13
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
Re: ESP Easy Flasher
strange, not working for me.
see hardcopy
file in settings/SerialCommands.txt exists
refreshed often, and restarted
default is stored in settings folder.
But still disabled ?
Thanks for checking Thomas
see hardcopy
file in settings/SerialCommands.txt exists
refreshed often, and restarted
default is stored in settings folder.
But still disabled ?
Thanks for checking Thomas
- 11 Dec 2018, 19:00
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
Re: ESP Easy Flasher
Hi
ok, but how to enable the checkbox?
to use serialcommands?
ok, but how to enable the checkbox?
to use serialcommands?
- 11 Dec 2018, 18:24
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
Re: ESP Easy Flasher
By the way. Latest release allows for custom serial commands using an external txt file. @riker1 you can add your special subnet and gateway in this file. They will be added after the standard commands so you will see the "wrong" subnet and gateway first but these will be overrun by the c...
- 10 Dec 2018, 18:34
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
Re: ESP Easy Flasher
By the way. Latest release allows for custom serial commands using an external txt file. @riker1 you can add your special subnet and gateway in this file. They will be added after the standard commands so you will see the "wrong" subnet and gateway first but these will be overrun by the c...
- 10 Dec 2018, 18:28
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
- 07 Dec 2018, 10:41
- Forum: ESP Easy: General Discussion
- Topic: ESP Easy Flasher
- Replies: 152
- Views: 212066
Re: ESP Easy Flasher
Hi
loving this tool.
MAybe an enhancement request.
for fixed ip, I would recommend to be aple to set all IP datails.
Gateway
Subnetmask
Does this make sence?
Can this be added?
Thanks Thomas
loving this tool.
MAybe an enhancement request.
for fixed ip, I would recommend to be aple to set all IP datails.
Gateway
Subnetmask
Does this make sence?
Can this be added?
Thanks Thomas
- 06 Dec 2018, 22:07
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
thanks, perfect, working now!!
- 06 Dec 2018, 00:20
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
Hi could you please double check. Do not see FHEM as Controller? Thanks Thomas Firmware Build 20102 - Mega Libraries ESP82xx Core 2_4_0, NONOS SDK 2.1.0(deb1901), LWIP: 2.0.3 GIT version (custom) Plugins 11 [Normal] Build Md5 4d44355f4d44355f4d44355f4d44355f Build time Dec 5 2018 18:55:03 Binary fil...
- 05 Dec 2018, 19:19
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
Thanksgiving perfekt
- 04 Dec 2018, 22:07
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
Hi
thanks
perfect,
No i would need a small version for esp01S
LC TEch with 2 relays
Thanks a lot T
thanks
perfect,
No i would need a small version for esp01S
LC TEch with 2 relays
Thanks a lot T
- 04 Dec 2018, 20:37
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
Hi
using latest firmware,
but FHEM is not available as controller?
Could you make a version with Fhem enabled in controller list?
OpenHAB MQTT and FHEM would be perfect
Thanks T
using latest firmware,
but FHEM is not available as controller?
Could you make a version with Fhem enabled in controller list?
OpenHAB MQTT and FHEM would be perfect
Thanks T
- 29 Oct 2018, 13:34
- Forum: ESP Easy: Software
- Topic: NTC thermistor (collection / list & code implementing)
- Replies: 2
- Views: 4802
Re: NTC thermistor (collection / list & code implementing)
Hi
old thread but
is there a thermistor plugin available right now?
thanks
old thread but
is there a thermistor plugin available right now?
thanks
- 28 Oct 2018, 13:23
- Forum: ESP Easy: Software
- Topic: Http request, header and command, spaces
- Replies: 2
- Views: 1954
Re: Http request, header and command, spaces
Hi
I am also using httprequest an android tool.
Do not know if this is converting blanks, commas, etc.
so what needs to be send to be sure?
better to escape / encode all blanks, commas, ; = ?
I am also using httprequest an android tool.
Do not know if this is converting blanks, commas, etc.
so what needs to be send to be sure?
better to escape / encode all blanks, commas, ; = ?
- 28 Oct 2018, 13:11
- Forum: ESP Easy: Software
- Topic: espbridge fhem and espesay webgui
- Replies: 0
- Views: 1697
espbridge fhem and espesay webgui
Hi having a witty running and website espEasy is not coming up but the device is in fhem available via espbridge can execute : http://192.168.0.9:8086/fhem?cmd=set%20ESPEasy_ESP_Witty_5_156%20gpio%2013%200&XHR=1 and is working: strangwise: http://192.168.0.156/control?cmd=13,0 running latest fir...
- 28 Oct 2018, 12:23
- Forum: ESP Easy: Software
- Topic: Heating (Brötje) temp sensor QAZ 21 to ESP
- Replies: 0
- Views: 1630
Heating (Brötje) temp sensor QAZ 21 to ESP
Hi
anyone archived to connect a temp sensor QAZ 21 to an arduino / ESP?
Thanks Thomas
anyone archived to connect a temp sensor QAZ 21 to an arduino / ESP?
Thanks Thomas
- 28 Oct 2018, 11:34
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
thanks
good idea via mqtt
good idea via mqtt
- 27 Oct 2018, 18:24
- Forum: ESP Easy: Software
- Topic: Serial MCU controlled relay/switch
- Replies: 459
- Views: 961764
Re: Serial MCU controlled relay/switch
Hi
having this modul attached to fhem via espbridge
How can I switch the relay?
do int it at the moment via wget
but isn't there a option via esp module fhem?
Thanks
having this modul attached to fhem via espbridge
How can I switch the relay?
do int it at the moment via wget
but isn't there a option via esp module fhem?
Thanks
- 25 Oct 2018, 16:51
- Forum: ESP Easy: Software
- Topic: Http request, header and command, spaces
- Replies: 2
- Views: 1954
Http request, header and command, spaces
Hi
sending http requests.
Having some questions.
Do I have to send escaped code for
=
space
comma, etc?
do I have to set a header? how?
di i have to use control or Tools
Thanks
sending http requests.
Code: Select all
http://192.168.0.147/control?cmd=gpio%2C5%2C0
Code: Select all
http://192.168.0.147/tools?cmd=gpio%2C5%2C0
Do I have to send escaped code for
=
space
comma, etc?
do I have to set a header? how?
di i have to use control or Tools
Thanks
- 25 Oct 2018, 11:14
- Forum: ESP Easy: Software
- Topic: timer event unreliable / irregular working
- Replies: 3
- Views: 2284
Re: timer event unreliable / irregular working
ok thanks
will try new release
is it working on an esp01?
# removed them from the rule
will update later
will try new release
is it working on an esp01?
# removed them from the rule
will update later
- 25 Oct 2018, 09:50
- Forum: ESP Easy: Software
- Topic: timer event unreliable / irregular working
- Replies: 3
- Views: 2284
timer event unreliable / irregular working
Hi try to do an easy gpio on off timer event. http://192.168.0.147/control?cmd=event,timerstart but it is not ending, gpio is on but timer is not stoping. On timerstart do timerSet,1,3 //timer 1 wird fr 3 Sekunden gesetzt gpio,5,1 //GPIO aktiv schalten endon On Rules#Timer=1 do gpio,5,0 # timerSet,1...
- 24 Oct 2018, 16:07
- Forum: ESP Easy: Hardware
- Topic: esp8266 with 12 V AC step down converter
- Replies: 9
- Views: 8313
Re: esp8266 with 12 V AC step down converter
Hi Adam,
ok, thanks.
but your recommendation is DC only I think.
Model: DC-DC buck module
Input voltage: 4.5V ~ 28V
Output voltage: 0.8V ~ 20V
Output current: 3A (max)
Conversion efficiency: 96% (highest)
I require an AC-DC
ok, thanks.
but your recommendation is DC only I think.
Model: DC-DC buck module
Input voltage: 4.5V ~ 28V
Output voltage: 0.8V ~ 20V
Output current: 3A (max)
Conversion efficiency: 96% (highest)
I require an AC-DC
- 24 Oct 2018, 13:04
- Forum: ESP Easy: Hardware
- Topic: esp8266 with 12 V AC step down converter
- Replies: 9
- Views: 8313
Re: esp8266 with 12 V AC step down converter
Thanks a lot
- 24 Oct 2018, 12:23
- Forum: ESP Easy: Hardware
- Topic: esp8266 with 12 V AC step down converter
- Replies: 9
- Views: 8313
Re: esp8266 with 12 V AC step down converter
Hi, thanks
How do I calculate the smooting capacitor ?
or would this work?
https://www.ebay.de/itm/LM2596-AC-DC-to ... ctupt=true
Thanks
How do I calculate the smooting capacitor ?
or would this work?
https://www.ebay.de/itm/LM2596-AC-DC-to ... ctupt=true
Thanks
- 24 Oct 2018, 11:13
- Forum: ESP Easy: Hardware
- Topic: esp8266 with 12 V AC step down converter
- Replies: 9
- Views: 8313
esp8266 with 12 V AC step down converter
Hi
having a question.
Anyone havong an idea how to power supply esp with 5v DC
from a source 12v AC?
Thanks a lot
Thomas
having a question.
Anyone havong an idea how to power supply esp with 5v DC
from a source 12v AC?
Thanks a lot
Thomas
- 03 Sep 2018, 13:47
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
Hi
yes this worked.
renaming device 6
saving it
deleting it
error is gone.
Thanks
yes this worked.
renaming device 6
saving it
deleting it
error is gone.
Thanks
- 03 Sep 2018, 11:28
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
no a new name for task 1 is not showing the error.
somehow PIR160 is stored in some place
I just have to avoid renaming PIR160 , this is causing problem - effort in fhem to check and redesign actions
somehow PIR160 is stored in some place
I just have to avoid renaming PIR160 , this is causing problem - effort in fhem to check and redesign actions
- 03 Sep 2018, 10:30
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
ok, again firmware applied. mega-20180826 normal version Firmware Build 20102 - Mega Libraries ESP82xx Core 00000000, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 GIT version mega-20180826 Plugins 46 [Normal] Build Md5 68b5a4e37d60a2651976a1c4178e370 Md5 check passed. Build time Aug 26 2018 02:14:44 Binary...
- 03 Sep 2018, 09:23
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
no error when using: mega-20180409-normal
- 03 Sep 2018, 09:22
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
sane with firmware mega-20180826 normal
- 03 Sep 2018, 09:20
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
empty id 6 is saying conflict with id 1 now - which is now a new device
- 03 Sep 2018, 09:19
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
I deleted id 2 (having the conflixt with #id 1)
submitted an empty id1 now saysing having a conflixt with id#6 which is and was always empty.
running mega-20180826 test
submitted an empty id1 now saysing having a conflixt with id#6 which is and was always empty.
running mega-20180826 test
- 03 Sep 2018, 08:56
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
Ah ok, devices at handled in task
actually device 1 is bank, was always blank I think.
looks like the name of device 2 is stored somewhere.
when I change the name it is ok, error gone.
but I need the old name in fhem, (to avoid changes there)
actually device 1 is bank, was always blank I think.
looks like the name of device 2 is stored somewhere.
when I change the name it is ok, error gone.
but I need the old name in fhem, (to avoid changes there)
- 03 Sep 2018, 08:40
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
Re: error message device name is not unique, conflicts with task ID #1
Hi
actually where do I edit task #1?
Is this a rule?
which tab is this?
thx
actually where do I edit task #1?
Is this a rule?
which tab is this?
thx
- 03 Sep 2018, 08:21
- Forum: ESP Easy: Software
- Topic: error message device name is not unique, conflicts with task ID #1
- Replies: 17
- Views: 7155
error message device name is not unique, conflicts with task ID #1
Hi
strangwise I am getting the error message.
Do know know what task #1 is and how to change it?
"devise name is not unique, conflicts with task ID #1
No duplicate device names set.
any hints?
strangwise I am getting the error message.
Do know know what task #1 is and how to change it?
"devise name is not unique, conflicts with task ID #1
No duplicate device names set.
any hints?
- 30 Aug 2018, 20:21
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
Re: TSOP4838 no data read IR
ok understood.
thanks
thanks
- 30 Aug 2018, 14:42
- Forum: ESP Easy: Software
- Topic: (Solved) esp defive not correct delivered to fhem
- Replies: 0
- Views: 1489
(Solved) esp defive not correct delivered to fhem
Hi I have created a device in espeasy added fhem as controller and assigned the device to fhem controller I fhem i got the device but I am missing the set line where I can set all ESP commands I also miss all readings looks like I have an fhem device for each single esp device, I used to have in FHE...
- 30 Aug 2018, 13:48
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
Re: TSOP4838 no data read IR
Hi
I do not understand, fhem is expecting a protocol , data, bit for an irsend command.
in espeasy I think it is the same
irsend,Protocol, data, bit
so how do you phrase the
"If <number> then do <action>"
in detail?
Thanks
I do not understand, fhem is expecting a protocol , data, bit for an irsend command.
in espeasy I think it is the same
irsend,Protocol, data, bit
so how do you phrase the
"If <number> then do <action>"
in detail?
Thanks
- 30 Aug 2018, 08:15
- Forum: ESP Easy: Hardware
- Topic: esp witty not starting with board only
- Replies: 1
- Views: 1667
esp witty not starting with board only
Hi
I am havong a strange situation
having a witty but it is not booting without the socket attached.
It used to work without the socket. - witty cloud board only
I did a firmwarereset via easyesp and installed current firmware.
But no boot without the socket-base
any hints?
Thanks T
I am havong a strange situation
having a witty but it is not booting without the socket attached.
It used to work without the socket. - witty cloud board only
I did a firmwarereset via easyesp and installed current firmware.
But no boot without the socket-base
any hints?
Thanks T
- 29 Aug 2018, 18:45
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
Re: TSOP4838 no data read IR
I used the newest version
but do not know how to use those numbers?
but do not know how to use those numbers?
- 29 Aug 2018, 16:48
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
Re: TSOP4838 no data read IR
hi,
do you have a exapmle output for a correct decoded IR signal?
will it be similar to IRDUMP.ino?
Thanks
do you have a exapmle output for a correct decoded IR signal?
will it be similar to IRDUMP.ino?
Thanks
- 28 Aug 2018, 09:05
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
Re: TSOP4838 no data read IR
finaly I got a value, but what is this?
3775222700
would have expected something like
protocol,
data
bit
etc.
as in LIRC
3775222700
would have expected something like
protocol,
data
bit
etc.
as in LIRC
- 27 Aug 2018, 20:33
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
Re: TSOP4838 no data read IR
Hi
I connected it to D4 with pull up.
I just tried irdump in arduino , same ir receiver, there it works
I connected it to D4 with pull up.
I just tried irdump in arduino , same ir receiver, there it works
- 27 Aug 2018, 18:50
- Forum: ESP Easy: Software
- Topic: TSOP4838 no data read IR
- Replies: 14
- Views: 8517
TSOP4838 no data read IR
Hi
I did connect the TSOP receiver
but it does not catch and data.
What could be wrong?
thanks
running: ESP_Easy_mega-20180516_test_ESP8266_4096_VCC.bin
on wemos mini
I followed: https://www.letscontrolit.com/wiki/index.php/IR
I did connect the TSOP receiver
but it does not catch and data.
What could be wrong?
thanks
running: ESP_Easy_mega-20180516_test_ESP8266_4096_VCC.bin
on wemos mini
I followed: https://www.letscontrolit.com/wiki/index.php/IR