Let's Control It

M*I*B

... wait a moment. I have just download the ESP_Easy_mega_20230111_neopixel_ESP8266_4M1M Jan 11 2023 Let#s see if that present here also... Moment... Ok, not in the last build/merge... Can also be that my broken 07S have create that. I can't say for sure and can't reproduce it anymore (already in th...

M*I*B

... maybe .. or just to write to often so that the flash are broken ... But doesn't matter: Death is death :lol: BTW: that "Endon" don't work also like "If", "Elseif" or any other with the 1st letter capitalized. The former bin have no problems with it and also a colore...

M*I*B

... nope ... the 07S is death ... not flashable anymore ... I take a new one; have enough of them

M*I*B

... ok, with 4 LED I better use a4 Relays and 4 15kW Beams that my neighbors als have some fun at night :lol: :lol: :lol: EDIT: Ok, that's crazy... I have forget that the 07S have 4M instead of 1M and used the 1M 1st. After rewriting my little rule to NFX all goes well as expected... Then while dinn...

M*I*B

... jepp, I use a digital FET as levelshifter ... And yes, that creates many QRM on 2m/70cm and even more on shortwave!!! Will be a good idea to insert some RF choke and shield the whole thing as good as possible... Meanwhile I have flash the special build (FHEM). The NeoPixel Ring Clock module is m...

M*I*B

... the wiring is ok and short (10cm).
The hint with the special build I will check out right now... Thanx for that...
But just out of interest: What's the problem with that here? Just timing trouble while sending the commands to the stripe?

M*I*B

Hello there, while I'm waiting for some hardware to go future with my other projects I play around with a 2812 RGB-stripe. For now any because my wife like that also (great! Some thing to upper the WAF) I have just create a simple clock with 12 LED's. I use a S07S for that with the last 1M VCC-build...

M*I*B

... great! Thank you!

M*I*B

... just one more after the nap:

How can I check if a numeric value even or odd?

M*I*B

... opk, same here...

Then let us end here and take a nap

Good N8 then ...

M*I*B

... yes and yes/no ... I have try both and just right now I have catch the problem... On Clock#Time Do ... don't work. The Logfile show the event but the "DO" will be ignored. If I set ... On Clock#Time=All,**:** Do ... the Logfile show the event as before AND the "DO" will be pr...

M*I*B

The parameter parsing is already documented in RTD: https://espeasy.readthedocs.io/en/latest/Rules/Rules.html?#parameter-parsing You're right. I wasn't concerned with the two spellings with numerical or name references. It was clear to me that both are possible (I'm lazy and prefer to use numbers)....

M*I*B

Just some trouble... 1. Inconsistency in the RTD / TaskValueSet In the RTD there is an inconsistency in the TaskValueSet area as to how the command is to be written. TaskValueSet 12,1,0 versus TaskValueSet,12,1,0 respectively TaskValueSet dummy,var1,0 versus TaskValueSet,dummy,var1,0 Once it is show...

M*I*B

... the 1st idea was to use PWM to move the gauges but for that I have to rewind the coils inside. Half of the bunch are Ampere meters witch 3mm copper wire coil (10A full scale, used with shunt), the other are for 100V full scale (400V and 2kV used with serial shunt). Then I remember that I have ma...

M*I*B

yepp, that will be a good one... But former I don't have used fade and then it crashed more often. Seems that fade soften that problem instead of harden ... Anyway... This PWM to drive a servo don't work as expected right now so I will swap back to my coil winding option. Time to test the counter de...

M*I*B

Ok, last for now... I have read a while at the datasheet https://www.nxp.com/docs/en/data-sheet/PCA9685.pdf. Special side 14 and 16 are very important. I start with side 16. There I find out that 0x10 can't be the default due BIT 2 of ModeRegister 2 default are 1 (TP on output) but the outputs are s...

M*I*B

:D :lol: ... funny twin - ways :mrgreen: BTW: Unfortunately, that destroys my idea of removing (and storing) the moving-iron movements of the retro instruments and replacing them with servos. Then, for better or worse, I will have to wrap all the coils so that they reach full deflection with 4.5V...

M*I*B

EDIT 2: This board is useless for that. A pull-up from V+ to PWM is simply missing for each port. It is a mystery to me why these servos should supposedly run on all the whole internet sides without any further measures being taken; definitely not possible without PullUp ... Incidentally, the "...

M*I*B

... ahh ok... I never get that gittyhubbystuffstaffstiff ^^ BTW and full off topic: Do any of you know with which simple CAD freeware you can draw a scale for an old analogue instrument??? I've just tried it with LibreCAD, but I'm already unsuccessful in dividing the dividers. There is no function f...

M*I*B

Or use ESPEasy plugin P044 P1 WiFi Gateway, that can be installed multiple times.

I have just take a look... But where can I chose the GPIO that the GW have to take data from? There is nothing about to see...

: Bild_2023-01-03_164517428.png (21.31 KiB) Viewed 3587 times

... but I'm sure that I just overview some .. or not?

M*I*B

... yepp, that's the problem ...

Hmmm... Maybe a Atmel as buffer... Most have an hardware UART and more then enough memory. But who can code that?!

Or back to the 1st idea with an Raspberry Pi Zero W ....

M*I*B

... that here is a sample packet that comes all 2 seconds as push-message with 9600,8,n,2 /ESY5Q3DA2056 V3.01 1-0:0.0.0*255(1050000650) 1-0:1.8.0*255(00000000.4500000*kWh) 1-0:21.7.255*255(000030.00*W) 1-0:41.7.255*255(000250.00*W) 1-0:61.7.255*255(000070.00*W) 1-0:1.7.255*255(000350.00*W) 1-0:96.5....

M*I*B

Which UART chips are supported by ESPeasy? IO have not find any I²C to UART in the list at https://espeasy.readthedocs.io/en/latest/Plugin/_Plugin.html https://www.maxlinear.com/product/interface/uarts/i2c-spi-uarts/xr20m1280 Not easy to solder by hand but things like that I have in mind ... https:...

M*I*B

: giphy.gif (410.49 KiB) Viewed 3389 times

M*I*B

... ahhh ok ... Now I really get it. I have to see it as a coupled system for each UART and can't decouple RX and TX from one port as independent ... Right?!

M*I*B

Ok, got it... I think. So if I only bend RX0 to an other Port TX0 still stay on GPIO1 (J2 Pin3 in my schematic) and send LogData as before ? To break things down a bit, what I actually want... There are only two EasyMeters in my house. But a friend already has three of them in the meter cupboard and...

M*I*B

Japp, ok... RTX0 is going to header J2 for flashing. So if I understand right then if I "bend" only RX0 and not TX0 to IO2 (for now; I will change it) the original logdata stay at IO1 ? ... ahhh yes! Now I remember that you have tell me any about IO12 in the past... Have forget that :? And...

M*I*B

... ohhh men ... That's not as easy as I expected :roll: Ok, you have understand me right... Now I have chose IO 2, 12 and 14 (pin 13, 14 and 24) for serial data input. They are declared as: IO 2: ADC2_2, HSPI_WP0, Touch2, RTC IO12 IO 12: ADC2_5, HSPI_Q, Touch5, RTC IO15 IO 14: ADC2_6, HSPI_CLK, Tou...

M*I*B

ok, that's great... So if I only need inputs (I have nothing to send out, only to receive) I can also use i.e. GPIO 32 to 36and 39 (PIN 4 to 9) as RX0 to RX2 ?

M*I*B

Ok, new problem :roll: You say that the 32 have 3 UARTS so that I can use RX0, RX1 and RX2. So if I take a look at the data sheet RX1 (GPIO 9) is in use by the internal Flash (see also here: https://www.mischianti.org/wp-content/uploads/2021/02/ESP32-wroom-32-pinout-mischianti-high-resolution.png) S...

M*I*B

... I have do a little more research ... It looks like that the year stamp just showing the revision- date of the PCB; same with the V1.0 on top/right. I find different PCB's , marked with V1.2, V2.0, V2.1, V2.2 or nothing and also other designed heat sink pad in the middle. I also found a hint that...

M*I*B

... you have see viewtopic.php?p=62136#p62136 with the explanation of the different versions.
If I understand correctly, the V1.0 shown here does not refer to the ESP, but only to the whole module, right?

: Bild_2023-01-02_000253039.png (230.29 KiB) Viewed 3961 times

M*I*B

TD-er wrote: ↑01 Jan 2023, 20:59 And what about DealExtreme or Banggood?

... hmmm, never hear about them ... I take a look ...

Nope... nothing at both ...

M*I*B

Sure, but I know these are sold on a lot more sites :) ... that's maybe true ... Haven't find them yet at i.e. eBay... But I think that's the same like the ESP32... You can find one at Amazon for 30$ each out of the Espressif-Store. But at other places you get 10 pieces for the same price... I thin...

M*I*B

... ok, I see... Looks well but... aliexpress

M*I*B

Ok, you mean one of the OnDesk- programmer like ... Bild_2023-01-01_174358818.png That might work. But when the module is soldered on the new target board, I only have GND, TX, RX, VCC if I want to reflash the ESP in productive use directly at the meter. I don't usually go there, dismantle everythin...

M*I*B

Thanx for the SCH

I don't understand the meaning behind the transistor circuit (but how it works is clear). As usual, I have provided a reset button and a button for IO0. Because my small USB-UARTS have no DTR/RTS control lines

M*I*B

... that have nothing to do with java ... You only can pic a given city/town. And if they don't exist you loose ... Bild_2023-01-01_163522803.png If I set my postal code the only option is to chose "Niedersachsen/Celle"... But "Niedersachsen" isn't a city or town and Celle isn't ...

M*I*B

the 2 transistors for toggling the RST and GPIO-0 What do you mean with that? Any schematics where I can take a look ? BTW: Find some at ali but can't order there due it's noch possible to enter my correct shipping address :evil: :roll: The website programmers are the biggest jerks I've ever seen...

M*I*B

... it isn't possible in most offers to catch the revision they sell ... That's the 1st problem... The 2nd problem is that I can't register at aliexpress due they don't accept any eMail- address I have try with "enter a valid email" :roll: So aliexpress is out for me ... Found a descriptio...

M*I*B

Yes, I develop my PCB's by myself (KiCAD, Altium) but let produce it external due it's hard to make VIA's by myself (and also the PCB looks ugly) With soldering that stuff I have absolutely no problem. I'm old but I'm able to handsolder 0402 without problems... In fakt to my eyes going older 0201 is...

M*I*B

Yes, maybe a ESP32 is cheaper ... let me take look... EDIT: Which I²C-to-UART do you mean? I can't find anything in the device list (or I'm still blind from Wiskey...) BTW: If my choice fall on ESP32... like this one? Bild_2023-01-01_125209584.png But that one with external antenna- connection is mo...

M*I*B

* Happy new year *
So much time has to be

Ok, thx for the info about. My gut feeling didn't deceive me...

Then I'll have a look at the I²C to UART thingy. I've got all the ESPs here so better use that as buy a 32 ... and I'm sure I'll fit a small chip more on the circuit board...

M*I*B

Ok, back to the initial topic meanwhile ... I just finished the PCB for one of my drawer projects. But while I was at toilet (while pooping always got my best/craziest ideas) a question come up that could at least kill this project. So I ask... Setup (like attachment): Task 5: Communication - Serial...

M*I*B

7950AX on DSL Firmware must be the same except the WAN- segment. I will connect AVM with that problem... Let's see what they have to say about ... EDIT: Today I sent everything we could find out about this topic to AVM and opened a ticket. Let's see what they'll say about it. Perhaps we should move ...

M*I*B

Ok, I have plugged the new S20 that he can use the 3rd AP. And the S20 see all! Now there is really only one possible version left: As long as the ESP's are connected to any AP, everything is fine. But if they are logged in at the box itself, the MESH master, then they no longer see each other. In m...

M*I*B

Could be that the AP where those two connect to is configured differently? No, that can't be due all AP's are handled from the box itself. Same firmware, same software, same hardware (revision) of all AP's Later then I check out the 3rd AP and will report ... Do all nodes connect using 802.11g or 8...

M*I*B

.. I have near the same. I just have three 1750E, configured by the FritzBox-MESH and all up to date. And also "can communicate with each other" is ticked Meanwhile I have move the new S20 also to the garage. But now totally unexpected the new S20 see the other S20 in it's own AP; they see...

M*I*B

TD-er wrote: ↑29 Dec 2022, 17:11 The only thing I can think of here is that the nodes connected to the same AP do not see each other.
Is that correct?

Yes, I also think so. Later I will check that over cross and place the new S20 to the garage. I will report then ...

M*I*B

Ok, I have just flash an other S20 with the build 202212 23 ... Who knows?! That's now Unit 87. Same thing... The new S20 see itself the Garage-S20 but not the U86 and nor the U121 on the same table... Then I had a glorious idea! I take this new S20 and plug it into power at our living room. Our LR ...

Search found 379 matches