Search found 307 matches
- 01 Nov 2018, 00:51
- Forum: ESP Easy: Software
- Topic: ESP Easy Mega - Config partly lost after reboot
- Replies: 9
- Views: 4590
Re: ESP Easy Mega - Config partly lost after reboot
When i open then the ESPEasy config, open the edit dialog for each device, submit it without any change, everything is running well again. Sounds like a race condition: A spike by the Relay triggers the RCWL-0516. With that action you breack the race. independent of the radar sensor signal. Your ve...
- 29 Oct 2018, 11:16
- Forum: Staff Announcements forum
- Topic: Reference project for the upcoming homepage
- Replies: 28
- Views: 43631
Re: Reference project for the upcoming homepage
Nice recap of the project. Would you mind sharing hardware included? Sure, this is what I have on a 2017 file (sorry, a little English/Dutch mixture). My first ESP project. Running ESPEasy_v2.0.0-dev11 modified for 24 tasks. Built 4 of these units, #2 for my house, #2 for my brothers house. Multi_c...
- 29 Oct 2018, 00:20
- Forum: Staff Announcements forum
- Topic: Reference project for the upcoming homepage
- Replies: 28
- Views: 43631
Re: Reference project for the upcoming homepage
Multi channel floor heating temperature measurement with LCD activation via PIR
- 25 Oct 2018, 18:01
- Forum: ESP Easy: General Discussion
- Topic: is there any to mark a post/topic for futher reference?
- Replies: 4
- Views: 3565
Re: is there any to mark a post/topic for futher reference?
Does this help?
- 24 Oct 2018, 22:52
- Forum: ESP Easy: General Discussion
- Topic: PN532 and Home Assistant
- Replies: 9
- Views: 7259
Re: PN532 and Home Assistant
Ohhh great
- 24 Oct 2018, 09:17
- Forum: ESP Easy: General Discussion
- Topic: PN532 and Home Assistant
- Replies: 9
- Views: 7259
Re: PN532 and Home Assistant
New way would be to use this:
Code: Select all
Let,1,123456789
Can you enlighten us about this new way?
- 22 Oct 2018, 17:50
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 85191
Re: RCWL-0516 Microwave Motion Sensor
ingenious use to detect water flow?
Just to save the life-span of the back-light.
- 22 Oct 2018, 01:22
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 85191
- 22 Oct 2018, 00:46
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Reserved for: - Known Issues Delay on the project due to: - many WatchDog reboots - many NAN values from DS18B20 - NAN propagation in Rules? - many "HTTP: C001 connection failed" Currently #6 units under test Solved HW issues: - taming the RCWL-0516 (solved with 1K serial resistor in V3) -...
- 22 Oct 2018, 00:46
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Reserved for:
- ESP Rules
- ESP Rules
- 22 Oct 2018, 00:45
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Reserved for:
- ESP Tasks
- ESP Tasks
- 22 Oct 2018, 00:45
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Level shifter modification and PWM discussion. In 2014, I modified the Grundfos UPS 25-60-180 floorheating pump's from a mechanical 3 speed adjustment to a Z-wave 3 speed plus Off remote control capability. See: http://www.domoticz.com/forum/viewtopic.php?f=34&t=5025 Thanks to this modification ...
- 22 Oct 2018, 00:44
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
RCWL-0516 Microwave Radar modification and TTP223 Touch sensor usage: After endurance tests with several units, I skipped the idea of replacing the resistor on the left bottom marked 221 (220 Ohm, 0805 SMD) by a 470 Ohm. With the 470 Ohm you reduce the antenna gain. It does reduce the detection rang...
- 22 Oct 2018, 00:44
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Building suggestions 2 Check the LCD for a correct mounting of the I2C print (straight, in parallel with the LCD) With my second batch of 2# LCD's this was not, and it took a lot of de-soldering rework to get it corrected. Lessons learned: buy seperate LCD an I2C units. Place some isolation tape in...
- 22 Oct 2018, 00:44
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Building suggestions 1 (description level: beginner/intermediate) Sorry: Board problem with pictures, need to solve this Create a drilling template, print it on sticker paper (see picture below) and use some dish-washing liquid on the box before you sticker it to move it in the correct position (dr...
- 22 Oct 2018, 00:43
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
Bill of Material (I know how much time this saves!) DIN rail adapter MNWL DINRAIL ADAPTER 72MM search in https://onderdelendatabase.nl/ DIN rail JMV DIN-RAIL TS35SL LG2 search in https://onderdelendatabase.nl/ Power supply 5V HLK-PM01 https://nl.aliexpress.com/item/Free-Shipping-1pcs-lot-HLK-PM01-A...
- 22 Oct 2018, 00:43
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Re: Flow, temperature, energy measurement and PWM pump control
- Electrical scheme Flow measurement, Temp sensors, Energy calculation, PWM pump control and Floor heating thermostat (web version 3).JPG [edit]: update to V3 Re-arrangement of GPIO's DS18B20 and pull-up moved to GPIO16=D0 Detect moved to GPIO14=D5, PU removed, current limiter resistor added Touch (...
- 22 Oct 2018, 00:42
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16829
Flow, temperature, energy measurement and PWM pump control
Objective is a generic Sensor/Actor unit: - Measure temperature IN and OUT (DeltaT) for floor heating and boiler - Measure water flow - Calculate Energy: Flow * DeltaT * 4.18 - Control the floor heating pump by PWM, based on DeltaT - Report flow, temperature, energy and pump speed to Domoticz - Cont...
- 21 Oct 2018, 12:16
- Forum: ESP Easy: Software
- Topic: Reboot inside rules?
- Replies: 74
- Views: 52748
Re: Reboot inside rules?
You don't mention your version ... More recent versions (November? / October) do have stability issues. For the older version (ESPEasy_v2.0.0-dev11) with the 49 day bug, I use this rule On Uptime#MUC1_Uptime do if [Uptime#MUC1_Uptime]>60000 Reboot endif endon Where: Uptime is a System Info task with...
- 18 Oct 2018, 13:12
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 85191
Re: RCWL-0516 Microwave Motion Sensor
Happy to do that for you!
I will open another topic for that.
I will open another topic for that.
- 18 Oct 2018, 01:08
- Forum: ESP Easy: Projects / Applications
- Topic: RCWL-0516 Microwave Motion Sensor
- Replies: 43
- Views: 85191
Re: RCWL-0516 Microwave Motion Sensor
Just tested on a breadboard: Replacing the resistor on the left bottom marked 221 (220 Ohm, 0805 SMD) by a 470 Ohm, it does reduce the detection range to around 1 meter. https://ae01.alicdn.com/kf/HTB1JlLqe4WYBuNjy1zkq6xGGpXap.jpg With the 470 Ohm you reduce the antenna gain. [edit] ... side effect ...
- 13 Oct 2018, 10:23
- Forum: ESP Easy: General Discussion
- Topic: strange behaviour
- Replies: 12
- Views: 6894
Re: strange behaviour
a way to reduce the raw number of minutes I just divide %value%/60 and send it to Domoticz. To a virtual sensor Type: Custom Sensor, Axis label: hr. This already gives a good indication for (in-)stability. Like this: https://user-images.githubusercontent.com/35063211/46788241-0033eb80-cd3a-11e8-834...
- 11 Oct 2018, 22:22
- Forum: ESP Easy: General Discussion
- Topic: Serial config
- Replies: 8
- Views: 5217
- 08 Oct 2018, 09:12
- Forum: ESP Easy: Projects / Applications
- Topic: espeasy to active pump when open tap
- Replies: 14
- Views: 9513
Re: espeasy to active pump when open tap
- Think of presence detection in front of the tap PIR Sensor https://www.letscontrolit.com/wiki/index.php/PIR_Sensor Ultrasonic distance https://www.letscontrolit.com/wiki/index.php/HC-SR04 - Think of flow detection in the sink Rapid temperature change https://www.letscontrolit.com/wiki/index.php/D...
- 08 Oct 2018, 00:54
- Forum: ESP Easy: General Discussion
- Topic: mega-20181006 Controllers issues
- Replies: 9
- Views: 6126
Re: mega-20181006 Controllers issues
Indeed, for volatile data ... the last is the best!
- 06 Oct 2018, 23:33
- Forum: ESP Easy: General Discussion
- Topic: Sonoff basic use RF and TX
- Replies: 17
- Views: 15140
Re: Sonoff basic use RF and TX
Yep, Task 1 up to 4 do have fast response on interrupts.
- 06 Oct 2018, 23:25
- Forum: ESP Easy: General Discussion
- Topic: Sonoff basic use RF and TX
- Replies: 17
- Views: 15140
Re: Sonoff basic use RF and TX
Remember ... pulse counters must be Task 1,2,3 or 4. There are different types of LJ12A3 's: - most of them are at least 6V (see here: https://www.letscontrolit.com/forum/viewtopic.php?t=3003 ) - but this is a 5V version: https://nl.aliexpress.com/item/Free-shipping-M12-4mm-sensing-DC-5V-inductive-p...
- 06 Oct 2018, 10:32
- Forum: ESP Easy: Projects / Applications
- Topic: espeasy to active pump when open tap
- Replies: 14
- Views: 9513
Re: espeasy to active pump when open tap
My suggestion: enlarge the solution space.
- Think of presence detection in front of the tap
- Think of flow detection in the sink
The pump will run a few times to many, but no big deal in my opinion.
- Think of presence detection in front of the tap
- Think of flow detection in the sink
The pump will run a few times to many, but no big deal in my opinion.
- 23 Sep 2018, 00:56
- Forum: ESP Easy: General Discussion
- Topic: mega-20180914: Manual reboot (75), for what reason? Log settings ?
- Replies: 5
- Views: 3478
Re: mega-20180914: Manual reboot (75), for what reason? Log settings ?
The mentioned mega-20180914 runs now for 1 day 4 hours with a low intensive log level. So indeed, the log level influences the number of reboots. I see a number of times the DS18B20 error from one of the two sensors: DS : Temperature: Error! (28-ff-f8-31-b1-16-5-79) or DS : Temperature: Error! (28-f...
- 20 Sep 2018, 21:37
- Forum: ESP Easy: General Discussion
- Topic: mega-20180914: Manual reboot (75), for what reason? Log settings ?
- Replies: 5
- Views: 3478
mega-20180914: Manual reboot (75), for what reason? Log settings ?
On the breadboard: Running GIT version mega-20180914 Normal on Wemos D1 mini. Load ~30 %, but a number of times 100% is reported to Domoticz. Tasks: Generic pulse counter (~20Hz), SSD1306 OLED, 2# DS18B20 (per 30sec.), Dummy Device, System Info Uptime. GPIO 13 as PWM output. Objective: 1: Measure Te...
- 20 Sep 2018, 19:46
- Forum: ESP Easy: General Discussion
- Topic: is it possible for one espeasy device to control other espeasy devices
- Replies: 8
- Views: 7192
Re: is it possible for one espeasy device to control other espeasy devices
Take a look at: https://www.letscontrolit.com/wiki/index.php/EasyGlobalSync GUI example is not fully correct anymore (fore last picture is changed) Look for Inter-ESPEasy Network under Tools/Advanced Fill-in an UDP port and it should (?) work. Make sure that tasks are uniquely numbered in the group ...
- 09 Sep 2018, 21:11
- Forum: ESP Easy: Projects / Applications
- Topic: Tank water level with MS5540-CM
- Replies: 5
- Views: 6190
Re: Tank water level with MS5540-CM
How about the supported Ultrasonic HC-SR04 https://www.letscontrolit.com/wiki/index.php/HC-SR04 Waterproof: https://www.aliexpress.com/item/Integrated-Ultrasonic-Module-Distance-Measuring-Sensor-Module-Reversing-Radar-Waterproof/32312190912.html (not sure if they have the same interface towards ESPE...
- 05 Jul 2018, 10:30
- Forum: ESP Easy: Hardware
- Topic: nodemcu on battery
- Replies: 27
- Views: 44012
Re: nodemcu on battery
Is this of any help? https://ae01.alicdn.com/kf/HTB1_D7mRFXXXXX3XFXXq6xXFXXXW.jpg?size=247521&height=1000&width=1000&hash=739de3313c0d9eb16093e0682b8045c4 bought here: https://nl.aliexpress.com/item/5V-2-1A-Out-UPS-mobile-power-Diy-Board-Charger-Step-up-DC-DC-Converter-Module/32816254080...
- 03 Jul 2018, 11:21
- Forum: ESP Easy: General Discussion
- Topic: ESP unit - dead, but not quite!
- Replies: 20
- Views: 10610
Re: ESP unit - dead, but not quite!
I think you hit the 49 day problem:
viewtopic.php?t=3805
A cold start is needed, if you don't reboot within 49 days.
Suggestion: try a more recent version
viewtopic.php?t=3805
A cold start is needed, if you don't reboot within 49 days.
Suggestion: try a more recent version
- 10 Jun 2018, 20:32
- Forum: ESP Easy: Software
- Topic: SOLVED! MP3 plugin & YX5300
- Replies: 10
- Views: 7692
- 03 Jun 2018, 21:35
- Forum: ESP Easy: Software
- Topic: SOLVED! MP3 plugin & YX5300
- Replies: 10
- Views: 7692
Re: MP3 plugin & YX5300
This version is operational:
Firmware
Build 20100 - Mega (core 2_3_0)
GIT version mega-20180119
Plugins 70 [Normal] [Testing]
Anyhow ... you need the to use the "test" bin.
Did you?
Firmware
Build 20100 - Mega (core 2_3_0)
GIT version mega-20180119
Plugins 70 [Normal] [Testing]
Anyhow ... you need the to use the "test" bin.
Did you?
- 03 Jun 2018, 20:48
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 51336
Re: Stepper Motor
My project is still dormant ..
What I remember
Use
A+ and A-
B+ and B-
Other wires not connected.
I just fiddled with the parameters, nothing special.
What I remember
Use
A+ and A-
B+ and B-
Other wires not connected.
I just fiddled with the parameters, nothing special.
- 13 May 2018, 10:09
- Forum: ESP Easy: Hardware
- Topic: PCA 9685
- Replies: 2
- Views: 2769
Re: PCA 9685
Checked your syntax?
https://www.letscontrolit.com/wiki/index.php/PCA9685
Leave out spaces?
https://www.letscontrolit.com/wiki/index.php/PCA9685
Comma between <pin>,<value>PCAPWM,<pin>,<value>
Leave out spaces?
- 11 May 2018, 18:37
- Forum: ESP Easy: General Discussion
- Topic: Wemos D1 Mini running Arduino can't flash with ESP Easy
- Replies: 5
- Views: 6185
Re: Wemos D1 Mini running Arduino can't flash with ESP Easy
Good enough for flash, but not enough power for running.USB 2.0 port on Windows 7
That's my experience.
Did you try a separate 5V 1Amp power supply?
- 07 May 2018, 15:59
- Forum: ESP Easy: Projects / Applications
- Topic: suggestions on project
- Replies: 10
- Views: 8769
Re: suggestions on project
The cap is needed to smooth and not replaceable.
The LED could be replaced by a 1KOhm resistor to limit the in-going current ...but ..
The LED has also a voltage threshold function.
So ... why changing a proven design ?
The LED could be replaced by a 1KOhm resistor to limit the in-going current ...but ..
The LED has also a voltage threshold function.
So ... why changing a proven design ?
- 07 May 2018, 00:46
- Forum: ESP Easy: Projects / Applications
- Topic: suggestions on project
- Replies: 10
- Views: 8769
Re: suggestions on project
I know my schematic is not graphically accurate as they did not have all the components in it Lost your pencil ??? bypass the cap don't think so, .. it's to reduce the 50/100 Hz ripple after rectification and the led don't think so ... it reduces the input on the el817 with around 2V compared to th...
- 03 May 2018, 17:38
- Forum: ESP Easy: General Discussion
- Topic: Using a ESPEasy as WiFi extender?
- Replies: 5
- Views: 7159
Re: Using a ESPEasy as WiFi extender?
Not an answer on your solution, but can this solve the problem? add an antenna: https://nl.aliexpress.com/item/WEMOS-D1-Mini-Pro-16M-Bytes-External-Antenna-Connector-ESP8266-WIFI-IoT-Board/32761915000.html?spm=a2g0z.10010108.1000016.1.132f17104jLLWb&isOrigTitle=true https://nl.aliexpress.com/ite...
- 03 May 2018, 17:22
- Forum: ESP Easy: Projects / Applications
- Topic: suggestions on project
- Replies: 10
- Views: 8769
Re: suggestions on project
A good practice in electronics is drawing a schema
- 26 Apr 2018, 13:17
- Forum: ESP Easy: Projects / Applications
- Topic: suggestions on project
- Replies: 10
- Views: 8769
Re: suggestions on project
Yep, sorry,
I posted the wrong link.
This one is 230V
https://nl.aliexpress.com/item/1-Bit-AC ... Title=true
I posted the wrong link.
This one is 230V
https://nl.aliexpress.com/item/1-Bit-AC ... Title=true
- 25 Apr 2018, 20:15
- Forum: ESP Easy: Projects / Applications
- Topic: suggestions on project
- Replies: 10
- Views: 8769
Re: suggestions on project
Or use an opto-coupler
https://nl.aliexpress.com/item/12-V-1-K ... Title=true
https://nl.aliexpress.com/item/12-V-1-K ... Title=true
- 01 Apr 2018, 21:33
- Forum: ESP Easy: Hardware
- Topic: How to make Dew point show on display with sensor BME280?
- Replies: 11
- Views: 12042
Re: How to make Dew point show on display with sensor BME280?
Are you aware of the Wiki?
https://www.letscontrolit.com/wiki/index.php/ESPEasy
and the OLED page?
https://www.letscontrolit.com/wiki/inde ... LEDDisplay
https://www.letscontrolit.com/wiki/index.php/ESPEasy
and the OLED page?
https://www.letscontrolit.com/wiki/inde ... LEDDisplay
- 28 Mar 2018, 20:05
- Forum: ESP Easy: General Discussion
- Topic: Firefox -Internet Explorer behavior -Linux - Windows 7-10
- Replies: 7
- Views: 4518
Re: Firefox -Internet Explorer behavior -Linux - Windows 7-10
Since chunked transfer I see that the combination Win7 -- AVG anti virus -- Firefox59.0 is slower than before. I looks like every chunk is re-arranging the Firefox webpage lay-out until all chunks have arrived. The combination Win7 -- AVG anti virus -- IE11 is faster and smooth also with the older n...
- 20 Mar 2018, 18:25
- Forum: ESP Easy: Software
- Topic: Stepper Motor
- Replies: 36
- Views: 51336
Re: Stepper Motor
I never used it without modification, so I don't know the difference. It fulfilled my requirement of 7N but too slow for my 4 meter curtain (iirc 1.5 minutes). This one is my selection: https://www.ebay.com/itm/1PCS-Used-27mm-2-Phase-6-Wire-Stepping-Motor-With-Gearbox-Gear-Ratio-1-12-/172590534560?h...
- 16 Mar 2018, 23:50
- Forum: ESP Easy: General Discussion
- Topic: Dynamic SleepMode
- Replies: 11
- Views: 9795
Re: Dynamic SleepMode
Too much logging creates sleepless nights
- 16 Mar 2018, 23:41
- Forum: ESP Easy: General Discussion
- Topic: Dynamic SleepMode
- Replies: 11
- Views: 9795
Re: Dynamic SleepMode
Yeh ..but ..
then you would expect that only in the IF .. OR section
but the OLEDCMD is executed also 3 times
then you would expect that only in the IF .. OR section
but the OLEDCMD is executed also 3 times