hi there, I have a doubt regarding SSID & Key: If you have already defined a valid ssid/key and you want to re-run the wizard (for example because you move the esp to another location), you can't. Is it correct ? If so, I think it could be a nice thing if you could go to http://<esp_name>/setup ...

I found this nice device: https://www.sparkfun.com/products/10982 It's an AB encoder with RGB light and push button and can be used to build easy and powerful user interfaces.... I thought about 2 uses: - as an user interface, in conjunction with our beloved oled display - as an "analog" i...

one-hundred releases !
Thanx to all forum members, staff, contributors & developers !
paolo

recompiled, added reserve command, and just got 78 min without reboot !
regards...
paolo

@namirda
it says about 25-26 Kbytes free....
I'm going to ide 1.6.8 and recompile, to see if it goes better....
regards
paolo

Hi namirda,
I made the plugin run, but i can't get an uptime longer than 10-15 min (4 pages: temp, humi, free mem, uptime).
After some minutes the esp reboots....
It's only my esp's issue ?
regards
paolo

Thanx, Costo

Hi there, Is there some need for a 2x font size on SSD1306, to be easily read by anybody without glasses/lens ? :geek: Could be useful for temp, humi, power... I thing it could be simply something like this in the oled plugin page: - 1x/2x font size choice (8x8 or 16x16 char maps) - if 2x then allow...

Thanx for yr help....
I'll go on checking....
ragards
paolo

Hi all,
I saw that rel 2.1 of Board Manager has been released.
Has somebody tried it out ?
I just started a "compile" in the IDE, but got something like an "illegal variable type in serial config something" that stopped any further step....

Regards

Paolo

I found in espeasy code a reference to file esp.png in spiff (it looks like a 50x50 image)....Who knows more about it ?
Thanx & regards
paolo

...a great thank to the tag robot for its' unvaluable work....and, yeah, also to Martinus' patience...
Regards
Paolo

I can confirm that, after some tricky reset and/off power cycle, it reads tags.....
But now we need to get stability and reliability.
Any idea ?
regards
paolo

Hi there, Is the "value check" plugin still interesting for somebody ? I'd like raise an alarm (flashing light adn buzzer) if some level (i.e. power) is higher than a threshold Is there some need for such a feature ? I do know that can/is to be done by the controller, but my scenario is on...

thnx costo,
I think my problem is related to board manager 2.0.0.
Is there some forum member using pn532 AND board manager 2.0.0 ?

thanx for the info....
paolo

Hi,
I just upgraded to v57, and got almost the same result.....
Any idea ?
Is there any forum member that got it working ?
Thanx & regards
paolo

hi costo,
thanx for suggestions.
here's the link:
http://g01.a.alicdn.com/kf/HTB1FNENKpXX ... basata.jpg

I'll upgrade & recheck ASAP.....

Thanks & regards
paolo

Hi there, I can't get my pn532 NFC board running with my nodemcu v3. I am using v49 I get the init msg form PN532: PN532: Init: Found chip PN532 FW: 1.6 but when i do an I2C bus scan, i get this error: No I2C devices found Unknow error at address 0x1 Unknow error at address 0x2 Unknow error at addre...

hi there, I'm in a very similar situation: After i create the device in the "devices" page, i can't access the dht entry for editing or deleting. I get a ERR_CONTENT_LENGTH_MISMATCH error in the browser (chrome). edit: I raised the log level and got this msg in the serial console: No heap ...

hi there, I just set up Mosquitto Mqtt broker on Ubuntu 14.04 easily (after doing the remove-and-reinstall trick described in another tread of this forum), and I have these suggestions to the developers' group: 1. send also total variables (i.e. in pulse counters) in Mqtt publishing (domoticz will i...

Hi there, I'm Paolo from Italy. I discovered ESP a few month ago... I found ESP-EASY in esp8266.com forum a few days ago, and i think it's a GREAT project. I'm interested in improve MQTT interaction, even without domotic systems. Now I'm trying to set up pulse counter cloudmqtt operation..... I'll c...