Let's Control It

papperone

are, or will ever be, these modules supported? https://it.aliexpress.com/item/74HC595-74HC164-8-Bits-8-Bit-Digit-LED-Nixie-Tube-Display-Module-Red-Tube-Board/32672425544.html I tested again (as I do have it) both these displays and as well the ones based on TM74HC595 and I can confirm they are not ...

papperone

"Benvenuto"

papperone

Sorry for the delay but finally I managed to release new version of my plugin (thanks to TD-er to help on sort out the mess!). Below new functions/commands available, still not able to work on the issue that does not allow multiple displays :( Obviously some of the letters can't be shown properly bu...

papperone

In the wiki I posted few of the project I've already finalized and I do have few more I'm working with but still under testing... Have a look and let me know if you want to include any of them and eventually if you need more picures or better/different descriptive text: https://www.letscontrolit.co...

papperone

In the wiki I posted few of the project I've already finalized and I do have few more I'm working with but still under testing... Have a look and let me know if you want to include any of them and eventually if you need more picures or better/different descriptive text: https://www.letscontrolit.com...

papperone

Benvenuto

papperone

Received mine today and already tested flashing a test unit I'm currently working with (an advanced LED Strip controller with 5 channels) and it worked just great!
It is now my default programmer on my workbench!

papperone

I use a lot communication betweem modules and as well my protocol is MQTT. I don't have any delays and the only possibility I can think of is the "MQTT MESSAGE DELAY" parameters in the TOOLS/ADVANCED screen which could be way too high. I set it on 100ms to have a very responsive messages r...

papperone

Thanks was just curious as I still did not have experimented a lot with light sensors... I might clone myself to find time to do everything I've in my mind!!!

papperone

Those look awesome!!
Well done Shardan!!!

PS: any reason why you put 2 luninosity sensors in your outdoor module?

papperone

Thanks a lot! really apreciated!!!

papperone

I loved ESPEasy since 1st time I tried when I was looking and testing any ESP8266 firmware available! It's exactly what's needed for makes, it's not limites to simple home automation and it's amazing what you can achieve using its unique "rules" features :) Coming to me I am using it for s...

papperone

I can guess the Delay suring system boot process is not working as it should...
Have you tried with a timer?

papperone

3rd solution is the easiest and safer IMHO!

papperone

it works as far as the module does not reboot for any given reason on saturday between 16:00 and 23:00

papperone

I think the rules are ok for simple timing setup, when it comes to more complex and/or weekly I prefer to move out from ESPeasy as it's not as flexible as needed and the rules can becaome way too complex and probably cosume lots of CPU. As well without nested IFs the overall setup of combined criter...

papperone

you must use MQTT and use the message persistance features in order to do this (I have this feature in some of my modules even thou I don't use Domoticz) To clarify, papperone says you must activate the "MQTT retain" feature on the advanced tab. yes indeed, thanks for clarification, and a...

papperone

you must use MQTT and use the message persistance features in order to do this (I have this feature in some of my modules even thou I don't use Domoticz)

papperone

I need to review this plugin in order to move it to the standard repository...
honestly still same issue, lack of time to improve it making it working with multiple devices (e.g. to monitor multiple lines or 3-phase AC).

papperone

sorry but I cannot understand, the wiring is not clear and I see as well a Raspberry which no idea what's the purpouse of...

papperone

ok , understood!

I'll try to complete testing asap and make my PR

papperone

@papperone, was it me that made changes? I don't remember changing things to your plugin. Maybe I can help explaining what has changed recently and to what purpose? no TD-er, it was an user I've never heard of "GHolli" in --> https://github.com/letscontrolit/ESPEasy/pull/1631 what shoudl ...

papperone

it's too vague the description to be able to help you, can you please post a picture on how you connected everything?
only guess is that you are powering the strip wrongly or the strip has harware issues...

papperone

sorry about delays but while I was finishing the testing some other user commited in GitHub a change request of my plugin with huge nuber of changes aiming to optimization... long story short as I had already heavily changed the cosde to implement all new functions now I'm puzzled how to proceed :cr...

papperone

What value you have in the "Unit Number"?
I jad same problem and then realized only units 1-32 are shown in the Node List

papperone

grovkillen wrote: ↑02 Aug 2018, 12:09 I think we're on the same page here. Only a quick add to the discussion. The upcoming GPIO handler will make stuff like this possible.

that's great news!!!

papperone

You can then have a timer that would detect a hold that is less than one second since the timer would allow to be sub secund. well I don't htink this will fix the problem, let me explain: I woudl like a long push to be triggered after 2 seconds I would like any time below 2 seconds to be recognized...

papperone

grovkillen wrote: ↑01 Aug 2018, 11:27 The new scheduler will make it possible to have a higher resolution than seconds. So the timer will be working with 100mSec steps.

Not sure I understood how this improvement should help to detect faster short/long push... Can you elaborate more?

papperone

Sorry I just come back and I thought I explained I had no time to submit the new plugin as I prefer to run some more tests before releasing it.
Still it won't be supporting multiple display (I have to check what changes are needed to handle this last feature...)

papperone

https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules#One_button.2C_multiple_actions_using_long_press Honestly I don't like this workaround (it's not a real short/long push implementation) as 1 second can be too low and 2 seconds will make the normal behaviour odd (I push and release immediat...

papperone

Correct. 7seg s on the same display. I must have been doing something stupid though. I got it working a few hours ago and it's been updating ever since. This is my Rule: on Clock#Time=All **:** do 7dt,[BMP280#Temperature] enddo well, I thought you read as it was exactly my first suggestion right af...

papperone

I do apologize but I had no time to test my pluing in the last days as I'm finish to setup all for my vacation as I will leave tomorrow morning 5am...
I will continue to work on it on my return in 3 weeks so please be patient!

papperone

not sure I understood... do you want to have 2 devices communicate each other? or you have a single Wemos with both BMP280 and TM1637? if it's the second setup then you don't need to sendhttp to the same module but you should be able to use directly the command "7dt,[<sensor>#<value>]"

papperone

good point, I will add it and post PR later today but I need clarification how the 12h clock works (I'm 24h user :D) - midnight or noon should show as 00:00 or 12:00 ? Hi, i just checked out wiki https://en.wikipedia.org/wiki/12-hour_clock and midnight is 12:00 & Midday is 12:00 Yes, only diffe...

papperone

grovkillen wrote: ↑29 Jun 2018, 09:52 https://en.wikipedia.org/wiki/12-hour_clock

Thanks! will follow this page then

papperone

I have a Wemos D1 Mini running "ESP_Easy_mega-20180618_test_ESP8266_4096.bin" - very happy as it is working well, with a TM1637 4-Digit Display, Could a new "Display Output:" mode be added so as the clock mode can chose between a 12hr Clock or the existing 24hr Clock ? blinking ...

papperone

I use a lot MCP23017 and MCP23008 without the issue you are experiencing...
I use custom PCBs with both DIP and SMD version of above chip, how do you connect ESP to the chips?

papperone

For those using the 8-digit display could you put two values together, for example temperature and humidity? Thank you again for the work you are doing. Thanks to your work I'm creating a bedroom object rack.Only a question, as regards the text will it be possible to merge it in the same string of ...

papperone

testing new functions as below; please let me know asap if anything missed so I can still add it before new plugin release: - new command "7dst,<hh>,<mm>,<ss>" - "show time" in manual mode - new command "7dsd,<dd>,<mm>,<yy>" - "show date" in manual mode (if <y...

papperone

amigaroxx wrote: ↑12 Jun 2018, 22:10
papperone wrote: ↑12 Jun 2018, 06:53 I've even 8 switches on the same device perfectly working so that's defintely possible...
Try to switch to the latest build or at least to R148.
Where can I find R148? I can only find R147 RC8 on the website..... sooo...

go for R147 but you can try as well latest 2.0 build...

papperone

I've even 8 switches on the same device perfectly working so that's defintely possible...
Try to switch to the latest build or at least to R148.

papperone

GPIO0 is the push-button, if I remember correctly the relay is connected to GPIO12...

papperone

Hi all, I would like to use sunrise/sunset time in a rule (eg sunrise + 30min) on a Wemos D1 mini using latest mega build. How to do this? An external HTTP request would be good, but not to a lokal controler. I want to be independent from another controler. Any ideas or tipps? thx You need to know ...

papperone

it depends how relays are connected, usually it's safer when using optocouplers to use reverse logic as you described 0=relay on, 1=relay off.

papperone

I did not plan in the plugin to be able to show date/time manually with a command rather than automatically...
I noted this as new future fature to implement in next release, thanks!

papperone

Hello, I made some updates on your plugin for my own usage : > Led count and column count in plugin configuration (need a restart to apply) > Some more effects ( find some inspiration at https://www.tweaking4all.com/hardware/arduino/adruino-led-strip-effects/ ) Feel free to take these changes. work...

papperone

1) yes currently only one display is allowed, still need to spend some time to implement multiple displays... 2) definitely yes, it was somethign planned to add alphabetical chars but still not done; I'll fin dsome free time to implement this new features and will take your suggestion but I'm puzzle...

papperone

The Sonoff POW will be a separate binary, as soon as it is tested. The current implementation of the sensor used in the POW is taking a bit too much memory, so it cannot be combined in a single binary with all plugins. As written in the original post of this plugin, the HLW8012 is not used only in ...

papperone

I will try to get the new schematic and as well some knowledge of the new hardware to try to implement it in ESPEasy... @ TD-er : as you defined now in current cource code my HLKW8012 plugin can be used only with Sonoff-POW, while there are few dev board with this chip (e.g. ElectroDragon) and as we...

papperone

DHT11 (specially chnese clones) are not famous for their accuracy....

Search found 497 matches