Let's Control It

frank

The code didn't seem to be backwards compatible with AVR anymore, so i updated some stuff from the original onewire library and things are working again. Also checked the DHT22 plugin and that one worked without modifications. Can't test the DHT12 as i don't have one... Latest source is on github (...

frank

i am trying to get an DS18b20 operational on the 2560 but it doesn't work
Am i doing somthing wrong or is it a software problem??

frank

LisaM wrote: ↑19 Aug 2017, 15:01
frank wrote: ↑19 Aug 2017, 13:06 looks greatbut what does it do?
Gate motor control:
- 1 Sensor to detect if the gate is open or not
- 1 Relay for opening the gate half (2 wings)
- 1 Relay for opening the gate full

No Wifi there, but ethernet was present...

thx for the info. Good solution

frank

looks greatbut what does it do?

frank

The mega2560 is working fine in my system. So i hope that there will be ferther work done one it

frank

sys log works and stable. But when sys log is set to 10 the unit is so busy whith syslog i couldn't login anny more on the website

frank

on first glance it looks stable and syslog functions

frank

great i will test it tonight

frank

I hope that the mega 2560 branch will ferther develop Don't get your hopes up, there is very little reason to spent a lot of time on this branch. The Arduino platform is outdated, even the DUE has only 512KB of flash memory and it's CPU still slow. The Arduino platform is growing WAY to slow... It ...

frank

i am verry happy with the progres of the last few days. Lisa and Martinus thx verry much for your help. I hope that the mega 2560 branch will ferther develop

frank

mutipel dht 12 messes the system up. Is there a solution for that? I hope that i am not asking for to much DHT12 uses the I2C bus and has only one fixed I2C address. Therefore it is limited to one by design. A DHT11 or DHT22 should work with more than one device thx martius. Ik zal wat andere opnem...

frank

mutipel dht 12 messes the system up. Is there a solution for that? I hope that i am not asking for to much 8-relay board, multiple dht-12's, you're asking a lot from an experiment... I suspect that you're using it because the 2560 has so many gpio's. But the 2560 is SEVERLY limited in both flash as...

frank

mutipel dht 12 messes the system up. Is there a solution for that?
I hope that i am not asking for to much

frank

it is stable for over een hour now

frank

i think it is a wiring problem The unit is stable now i took the relay board of Maybe your power supply is not stable enough to feed both arduino/ethernet shield+relay board? the power supply is stable it looks like 1 input on the 8 relay board is faulty i took it of and it looks stable even with 6...

frank

i think it is a wiring problem
The unit is stable now i took the relay board of

frank

this are the last entry in the log before crash 0:00:00 : HTTP : closing connection 0:00:00 : DHT12: Temperature: 21.50 0:00:00 : DHT12: Humidity: 61.10 0:00:00 : HTTP : connecting to 192.168.1.167 using port 8090 0:00:00 : /json.htm?type=command&param=udevice&idx=249&svalue=21.50;61.10;0

frank

i wil test ferther today to see where it stops. First thing i saw was that the sd card was not clean so i formated it and did a clean install. know waiting what happens

frank

after a few minutes the 2560 stops working so it is not verry stable

frank

it works like a charm now great

frank

okay
there is a lot to fix in this one. But that is to be expected with a test version

frank

LisaM wrote: ↑09 Aug 2017, 21:07 It crashes after a reboot because it hangs at the portUDP.endpacket call in the syslog function...
Disabling the endpacket (and other portudp calls) means it runs again after a reboot!

*Happy Girl*

great is that a software fix or settings?

frank

Martinus wrote: ↑09 Aug 2017, 20:12 Just checked the source, authentication is not implemented yet...

if possible could you look at that?

an otherthing is that i have tried 2 dht 12 on the unit and than it doesn't work any more
no readings then

frank

Martinus wrote: ↑09 Aug 2017, 20:12 Just checked the source, authentication is not implemented yet...

that explains a lot

frank

i am using the same login and password as my other esp units

frank

is it possible that communication with domoticz doesn't work ? this is wat the log tels me Welcome to Arduino Easy: Mer Ruimte 0:00:00 : HTTP : connecting to 192.168.1.167 using port 8090 0:00:00 : /json.htm?type=command¶m=udevice&idx=249&svalue=22.50;41.70;0 0:00:00 : HTTP/1.1 401 Unauthori...

frank

i am on a holliday also. And running like crazy to test the setup

The p034 did the trick i don´t get it in my domoticz but that is settings i think

frank

i have tested the dht plug in. The 12c scan does see the dht 12. but in the devices tab there is no reading. The log says dht no reading.

frank

Martinus wrote: ↑09 Aug 2017, 17:09 I've added the DHT plugin on github that compiles without error but can't verify that it actually works...

you are the best i will test it

frank

can you upload it here so that we can test it? i want to use this to control my heating system seperate in every room Link to sources and to image are in this topic.... i found the new version (i was looking and reading with my eyes shut :oops: ) and i will test it. The dht plug in gives errors whe...

frank

can you upload it here so that we can test it? i want to use this to control my heating system seperate in every room

frank

it is active i can see the sensor when i check in the advanced tab. But i dont have the knowledge to patch it in

frank

is it possible to ad i2c to the system for DHT12 sensors?

frank

Martinus is that you are back on this forum en that is great. Is it possible that you do some development on this side project???

frank

i just used the original file with uploader

frank

for me it is working fine
i hope some one will make the i2c work so i can connect sensors

frank

Hi, I was looking for a EspEasy sollution with cable, now its finally there :D But I cannot connect to an ip adres, Can someone please explain me how this works. I tried cross cable, connect with static ip to the 192.168.4.1, DHCP, flashed both versions but I cannot get ip address. (flashing succes...

frank

psy0rz wrote:You mean the arduino mega 2560?

i meant this side project
http://www.letscontrolit.com/wiki/index.php/ArduinoEasy

viewtopic.php?f=18&t=2234

frank

I am testing the ESPEasy_v2.0.0-dev2_test_ version. Installing was no problem.
I hope you will give the 2560 version some attention to (the i2c part of it)

frank

mrwee wrote:What about the forum? Would be nice if 'we' had multiple sub-groups e.g. per plugin, subjects like 'mqtt', 'openhab','"domoticz', etc.
Also, how to cope with change requests in a structured way?

that would be great with a timeline etc.with wat happens when

frank

i am getting verry happy from all this good news

But it wood be even beter if someone picks up the expirimental stuf

I can do testing and assist withthe wiki

frank

This is great. Are you going to pick up the experimental stuf to? I would love to add all the experimental plugins that do not require changes to the code base. So keep the base stable, but have an option for users to enable a potential unstable plugin from the webgui. Look here to find out about t...

frank

This is great.
Are you going to pick up the experimental stuf to?

frank

today an 7 hour sparerib sesion and it worked like a charm

Knowthe focus on the temperature/fan control

frank

I am using the plug in from github.

Yesterday i did a test run in an oven and it worked like a charm

frank

manjh wrote:Trust me, this has our attention but is not an easy problem to solve.
Filing Martinus's shoes is a challenge!

It are big shoes to fill i understand that. But it is fundemental for the continuation of the project i think.

frank

Now Martinus unfortunately stopped, I have a question. In what way is this project to develop and who will control the project?

frank

i can connect an DHT12 on the i2c bus en the scanner sees the sensor but i can't put it in devices. Can somebody help?

frank

the MAX6675 arrived from hong kong. But it isn't working. How do i connect it to an esp8266 12e devkit the cs is at gpio 15 I had some time and have got it working. It works great. Now i am going to try mutiple TK on the esp. It works with 2 TK :D :D How did you manage to get two of them to work? Y...

frank

i solved it by putting in an sd card

Search found 116 matches