Search found 279 matches

by ManS-H
16 Aug 2019, 12:36
Forum: ESP Easy: Hardware
Topic: Support for Wifi Irrigation Timer
Replies: 8
Views: 13111

Re: Support for Wifi Irrigation Timer

Hi HomeJCL, thanks for your return... The problem is i bought this product yet before i know the forum (lets control it).... So now i have it, i don't want to use it with Cloud Chinese ! I want to manage it in local area (Lan)... Thanks Interrupteur Is this the same product: https://www.banggood.co...
by ManS-H
08 Aug 2019, 10:15
Forum: ESP Easy: General Discussion
Topic: Hardware Watchdog Reboots
Replies: 219
Views: 210500

Re: Hardware Watchdog Reboots

My question, is this a normal situation? Nice to see the 97 day uptime on your old June-2018 core_2_4_1 build. With the 2.4.1 core, and up to the mid-2018 time frame, reliable run times were achieved by most users. I fondly remember those good old days. - Thomas Thanks for the reply. I used this ve...
by ManS-H
07 Aug 2019, 22:23
Forum: ESP Easy: General Discussion
Topic: Hardware Watchdog Reboots
Replies: 219
Views: 210500

Re: Hardware Watchdog Reboots

Hello,
I dont not really how the Watchdog works.
This is my firmware:
'
Watchdog-1.jpg
Watchdog-1.jpg (41.37 KiB) Viewed 31664 times
And this is what i see:
Watchdog-2.jpg
Watchdog-2.jpg (29.73 KiB) Viewed 31664 times
My question, is this a normal situation?
by ManS-H
27 Jul 2019, 12:19
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 26871

Re: Problem with Wemos D1 pro mini

It looks that module is ready for the bin.

Maybe a last chance, try other firmware, for example Tasmota. I know its not the right forum to promote is. But then you are sure it's a damaged module.
by ManS-H
27 Jul 2019, 10:03
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 26871

Re: Problem with Wemos D1 pro mini

I tried R120, mega-20190607 and another mega also but same behaviour. If I did mega flashing right..? I used Espeasy flasher, just picked 4M normal bin and no other changes in flasher. At least it it didn't gave me error messages. Did you use first blank_4MB.bin before you flash another version?
by ManS-H
25 Jul 2019, 12:18
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 26871

Re: Problem with Wemos D1 pro mini

Little more info. I noticed that computer got connection for few seconds and even gets ipaddress but after that connection disconnects. Is card faulty ? Clean the memory with blank_4MB.bin after that try to install the ESPEasy firmware again. Personal i used the FlashESP8266.exe for flash the firmw...
by ManS-H
24 Jul 2019, 23:00
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 26871

Re: Problem with Wemos D1 pro mini

Its configesp
by ManS-H
21 Jun 2019, 09:58
Forum: Introduce yourself
Topic: introduction
Replies: 1
Views: 4127

Re: introduction

Your're welcome here.
by ManS-H
18 May 2019, 18:57
Forum: ESP Easy: Hardware
Topic: ESP32 CAM
Replies: 11
Views: 20855

Re: ESP32 CAM

Looks good, and a nice price for the whole set.
https://www.aliexpress.com/item/ESP32-C ... 63411.html
by ManS-H
18 Apr 2019, 17:50
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 10657

What can users do to make ESPEasy more attractive.

Bear in mind that this "someone" is me and TD-er, we're only two people with everyday life. My money is out and my energy is almost out. All these suggestions are good but feel free to pitch in in ANY way or form. Good intentions isn't good enough. @ ManS-H you may change the title if you...
by ManS-H
17 Apr 2019, 11:40
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 10657

Re: OTA updates on 1MB devices

We are not doing it because lack of funding. We are pursuing money be helping companies use ESP Easy. They are mostly using 4MB and bigger... We simply need to get cash to put food on the table. I'm $4000 minus from trying to get this rolling as a company. Call me stupid, I will not argue with you,...
by ManS-H
16 Apr 2019, 20:29
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 10657

What can users do to make ESPEasy more attractive.

Its a pity that the latest builds not working with OTA with devices with 1MB memory, only a two step. There are a lot of devices that makes the work at home easy, they dont need fancy firmware. In my case i have Sonoff, Neo Coolcam and BlitzWolf BW-SHP6 devices. The latest two i have flashed with &q...
by ManS-H
26 Mar 2019, 20:58
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 5548

Re: Sonoff Basic and latest versions of ESP firmware

My Sonoff Basic: I think message " ESP_Easy_0, connected, no internet" is correct. ESPeasy is in AP mode ( and without internet connection of course ) You must connect to it ( 192.168.4.1 ) and set your wifi network SSID and password. Yes, you have right, that the normal situation. But in...
by ManS-H
25 Mar 2019, 16:48
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 5548

Re: Sonoff Basic and latest versions of ESP firmware

Can you give a very short summary of what is working and what isn't? As I read it, you could make it to work with the last build? But what did you do differently compared to the first attempt? I can made it works with the ESPlorer, but not as normal with 192.168.4.1 When i flash ESP_Easy_mega-20190...
by ManS-H
25 Mar 2019, 16:26
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 5548

Re: Sonoff Basic and latest versions of ESP firmware

Have you made a blank flash in-between? The settings have been refactored... Yep, first i cleaned up with blank_1MB I tried it again, first i used blank_1MB, then ESP_Easy_mega-20190315_normal_ESP8266_1M, I controlled the process with ESPplorer. I see on my telephone ESP_Easy-0, connected, no inter...
by ManS-H
25 Mar 2019, 11:59
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 5548

Sonoff Basic and latest versions of ESP firmware

Hello, Last week i was busy with my two Sonoff-Basic modules. I put the version ESP_Easy_mega-20190121_normal_ESP8266_1024 on it. Problems with connecting on Wifi. Then i tried the version ESP_Easy_mega-20190315_normal_ESP8266_1M, same problems. Then i go back to a very old version, ESPEasy_R147_102...
by ManS-H
25 Mar 2019, 10:49
Forum: uPyEasy: General Discussion
Topic: AurAir Launched!!!
Replies: 6
Views: 18813

Re: AurAir Launched!!!

I wish you a lot of success,
by ManS-H
22 Feb 2019, 20:50
Forum: ESP Easy: Software
Topic: P141 RGB Strip Plugin
Replies: 62
Views: 68780

Re: P141 RGB Strip Plugin

Hi, added two bin files with P141. One for 1MB and the other for 4MB flash. Hope that helps. BTW. I don't use ESPEasy for LED strips anymore although I love its flexibility. Tasmota has a much better implementation for this IMHO. This plugin flickers a lot in low dimming settings and it has no fadi...
by ManS-H
08 Jan 2019, 19:05
Forum: ESP Easy: Projects / Applications
Topic: USB charger, & nightlight fitted with Wemos D1 Mini project
Replies: 11
Views: 9997

Re: USB charger, & nightlight fitted with Wemos D1 Mini project

Tecumseh wrote: 08 Jan 2019, 17:01 I was hoping you would give me a store in the Netherlands :D
Look here: https://www.action.com/nl-nl/nl/multime ... e--tablet/ and then look at : Duo-USB wandlader

Succes, Herman
by ManS-H
17 Dec 2018, 17:55
Forum: ESP Easy: General Discussion
Topic: DNS ESPEasy
Replies: 2
Views: 2783

Re: DNS ESPEasy

Thanks for your answer.

Herman
by ManS-H
15 Dec 2018, 20:08
Forum: ESP Easy: General Discussion
Topic: DNS ESPEasy
Replies: 2
Views: 2783

DNS ESPEasy

Maybe a simple question. When i look in the tab "Config" i fill under IP Settings my DNS: 8.8.8.8
dns-1.jpg
dns-1.jpg (3.39 KiB) Viewed 2783 times
When i go to the tab "Tools, Info" I see also a place for a second dns.
dns-2.jpg
dns-2.jpg (3.38 KiB) Viewed 2783 times
Where can i fill that second dns?
I work with version: mega-20181124
by ManS-H
21 Nov 2018, 19:31
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

You're welcome, good to hear it works. [...] When i start the Sonoff Pow from Domoticz and i will stop it on the Nextion i must sometimes press the button twice. That's depend of the state of the variable on the Nextion. [...] I have already seen a similar behaviour of my Netxion. I think its a tim...
by ManS-H
21 Nov 2018, 12:58
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

Thanks Wiki, Yesterday morning i found the same solution with the trail and error method. It works for me good enough. I saw the same thing with working with your code and my code. When i start the Sonoff Pow from Domoticz and i will stop it on the Nextion i must sometimes press the button twice. Th...
by ManS-H
19 Nov 2018, 21:25
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

When i With Domoticz switch on/off the Sonoff Pow it works fine, it shows on the display the correct state. Do i the same on the Nextion same result Pow on/ff and on the nextion the correct state. When i switch on the Pow on Domoticz and off on the Nextion the Pow switched directly on again. I belie...
by ManS-H
18 Nov 2018, 14:22
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

On theWemos with the Nextion display, IP: 192.168.178.127 i use this rule: On RelayState do if %eventvalue%=0 SendToHTTP 192.168.178.127,80,/control?cmd=NEXTION,page0.bt0.val=0 SendToHTTP 192.168.178.127,80,/control?cmd=GPIO,12,0 else SendToHTTP 192.168.178.127,80,/control?cmd=NEXTION,page0.bt0.val...
by ManS-H
17 Nov 2018, 20:15
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

I'm a bit confused, but here's what I think is going on. 1. The Nextion is wired to the ESP12 and has IP address 192.168.178.xxx. 2. The Relay is on ESP01 and has IP address 192.168.178.127. 3. The ESP12's rule is sending the NEXTION http command to the ESP01. This is not what is wanted because the...
by ManS-H
17 Nov 2018, 16:06
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

OK, lets go. There might be a smarter solution, but I would go through rules. I assume that you have the domoticz configured as MQTT-controller in your ESP12. I assume that you have define a dual-state button in Nextion. If not already done so, define the gpio port of the relay as a device, an exam...
by ManS-H
14 Nov 2018, 10:51
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

Wiki wrote: 14 Nov 2018, 00:43 Is the Nextion connected to the same device which is switching the lights or are these two different devices? Or are the lights switched by three different devices?
Nextion has his own device, a Wemos D1 mini, The table lamp has a ESP01 and Domoticz a Raspberry Pi
by ManS-H
13 Nov 2018, 11:17
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

In general its no problem to show every information you desire on the Nextion using some rules. But to get help you should provide more information about the infrastructure you are using. My situation, i have three table lights with a ESP01 and ESPEasy build 145. I switched they on/off with Domotic...
by ManS-H
09 Nov 2018, 16:21
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

First I added two variables va0 and va1 and unchecked the Send Component ID of Bt0, b0 and down buttons. Next I put some code under the buttons: Under Tough Release Event of bt0: if(va1.val==0) { va1.val=1 print "|s,i99,sOn" printh 0a }else { va1.val=0 print "|s,i99,sOff" printh...
by ManS-H
03 Nov 2018, 14:34
Forum: ESP Easy: Software
Topic: ESP Easy and BME280 data
Replies: 6
Views: 5855

Re: ESP Easy and BME280 data

I finally upgraded all my esp8266 boards with the latest ESP Easy software. I'm using the BME280 devices and viewing the LOG option from the TOOLS tab, to view the data from the sensor. I notice it is giving me a Dew Point reading along with the Temp, Humidity, and Pressure. In the Device Setup tab...
by ManS-H
01 Nov 2018, 16:31
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

What you have done is absolutely correct. Talking to the Nextion using the Nextion-plugin is really that simple - if you do have a working serial communication. Check your wiring twice and triple, assure you have connected GND ESP and GND Nextion, use baudrate 9600, disable serial communication in ...
by ManS-H
01 Nov 2018, 11:09
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

I think, a printscreen would not be helpful. Pls give some more input. Wiki, I did the same as you, setup the Nextion plugin. And put in the first line: page0.WZt.txt="24.5" Then i start Nextion Editor, I have selected a font. Then i select in in the Toolbox the first line, Text. Give it ...
by ManS-H
31 Oct 2018, 19:03
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

In Nextion, I have a textfield named "WZt", when I am tying to send esp_ip/control?cmd=NEXTION,page0.WZt.txt="hallo" nothing happens. Wiki, is it possible to send me that HMI file or a printscreen of the Nextion Editor? I do something wrong, but i don't see the light. Thanks in ...
by ManS-H
23 Oct 2018, 12:35
Forum: ESP Easy: Software
Topic: P141 RGB Strip Plugin
Replies: 62
Views: 68780

Re: P141 RGB Strip Plugin

For PlatformIO there is a separate lib directory at the same level as the src dir. See directory structure here: https://github.com/letscontrolit/ESPEasy Hello TD-er, I'm not a programmer, only a simple user who was interrested in the possibilities of the _P141 Plugin together with a Huacanxing H80...
by ManS-H
21 Oct 2018, 12:16
Forum: ESP Easy: Software
Topic: P141 RGB Strip Plugin
Replies: 62
Views: 68780

Re: P141 RGB Strip Plugin

What do i wrong with compiling _P141? When i compile ESPEasy_mega-20181017 with Platformio no problem at all. But when I add _P141 to the map source/src and FastLED-3.1.8 to to map source/lib Then i add #include "<FastLED.h>" to ESPEasy.ino is see this: F:/ESPEasy Projects/ESPEasy_mega-201...
by ManS-H
07 Oct 2018, 15:27
Forum: ESP Easy: General Discussion
Topic: Sonoff basic use RF and TX
Replies: 17
Views: 14607

Re: Sonoff basic use RF and TX

I see two different names, waqa and qwswe both with the same idx 12154
by ManS-H
02 Oct 2018, 16:49
Forum: ESP Easy: General Discussion
Topic: Question about PlatformIO
Replies: 1
Views: 1885

Question about PlatformIO

After a lot of reading and trying i understand a little bit of PlatformIO as non programmer. But a have a question, if i build a normal_ESP8266_1024 the name of the build is firmware.bin with the size of 738KB. the ESP_Easy_mega-20181002_normal_ESP8266_1024.bin in the zip file has a size 732KB. Is t...
by ManS-H
30 Sep 2018, 09:12
Forum: ESP Easy: Hardware
Topic: How to flash these
Replies: 4
Views: 4333

Re: How to flash these

The second one looks the same as a Witty Board. Easy to flash. http://www.my-iota.com/Development%20bo ... 0Board.htm
by ManS-H
26 Sep 2018, 19:57
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95342

Re: Giveaway! 20pcs of programmers

This evening i came back from holiday and found a surprise behind the front door.
IMG_2632.JPG
IMG_2632.JPG (4.37 MiB) Viewed 81663 times
Thanks, Herman
by ManS-H
17 Sep 2018, 08:43
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95342

Re: Giveaway! 20pcs of programmers

:D Awesome, thanks.
by ManS-H
16 Sep 2018, 21:59
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95342

Re: Giveaway! 20pcs of programmers

To late, but my ledstrip with H801 and ESPEasy
IMG-20161210-WA0001.jpg
IMG-20161210-WA0001.jpg (357.61 KiB) Viewed 82480 times
by ManS-H
12 Sep 2018, 10:18
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95342

Re: Giveaway! 20pcs of programmers

Thanks to Martinus and all other developers, it has become much easier to automate at home.
by ManS-H
29 Aug 2018, 19:29
Forum: ESP Easy: Hardware
Topic: Rules for Sonoff Pow (first version)
Replies: 2
Views: 2629

Re: Rules for Sonoff Pow (first version)

I have seen some remarks about corruption on the Domoticz Wiki. For example here: http://www.domoticz.com/wiki/Domoticz_API/JSON_URL%27s#UV Maybe it applies to more? Also some Domoticz values require a 'svalue' and some a 'nvalue'. Yep, very strange. But i know now that the Virtual Sensor "Ele...
by ManS-H
29 Aug 2018, 16:58
Forum: ESP Easy: Hardware
Topic: Rules for Sonoff Pow (first version)
Replies: 2
Views: 2629

Rules for Sonoff Pow (first version)

I saw interestings rules of Prutsium in https://www.letscontrolit.com/forum/viewtopic.php?f=5&t=5246&hilit=pow+r2&start=20#p29035 I followed the same procedure, and made 4 dummy sensors in Domoticz. I changed this rule for my situation, but that doesn't works as i expected. The two lines...
by ManS-H
28 Aug 2018, 11:32
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95286

Re: SonOff POW R2 support

I like the rules, but my question. Can i also used them for my first generation Sonoff Pow with the HLW8012? And if it's yes what must i change in the rules.
by ManS-H
20 Jul 2018, 10:47
Forum: ESP Easy: Hardware
Topic: RF wall mounted light switch [discussion]
Replies: 18
Views: 11750

Re: RF wall mounted light switch [discussion]

So essentially, a wireless good looking button that can easily be mounted on the wall making it look like a light switch. I use one of these (dutch): https://www.klikaanklikuit.nl/nl/awst-8800-draadloze-wandschakelaar.html It's powered by a CR2032 battery. What circuit on the receiving end? I used ...
by ManS-H
18 Jul 2018, 16:44
Forum: ESP Easy: Software
Topic: Question about Sonoff Pow
Replies: 1
Views: 1842

Question about Sonoff Pow

I see in the Nightly Builds this firmware: ESP_Easy_mega-20180716_hard_SONOFF_POW
Can i use this also on the first version of the Sonoff Pow?

On the moment i still work with the papperone version: viewtopic.php?f=5&t=2126&start=120#p17969
by ManS-H
18 Jul 2018, 12:17
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

Thank for the info about the Nextion display.
by ManS-H
17 Jul 2018, 10:43
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1864583

Re: Nextion display plugin

Hello,
I have a question about the Nextion display, maybe not the right place to ask but what version of the Nextion is most common for this plugin.
On the Itead site i see two versions, the Basic Model and the Enhanced Model.