Let's Control It

ManS-H

Thank for the info about the Nextion display.

ManS-H

Hello,
I have a question about the Nextion display, maybe not the right place to ask but what version of the Nextion is most common for this plugin.
On the Itead site i see two versions, the Basic Model and the Enhanced Model.

ManS-H

Yes I am using D0. I've tried the last stable 2.0 (ESPEasy_v2.0-20180322), the MEGA release (ESPEasy_mega-20180522) and the R120. The first to have the rising and falling options but same behaviore, double counts. The r120 does not have the falling/rising options, and also counts double. i've even ...

ManS-H

The last report was at around 5 o clock this morning.

: ESP Easy-Domoticz.JPG (29.57 KiB) Viewed 11979 times

I have no idea what i can do to solve this problem.

ManS-H

This the situation of this morning.

The attachment ESP Easy-fail.JPG is no longer available

ManS-H

After 5 days three of the ESP's lost the connection.
This was the situation of yesterday.

The attachment ESP Easy-normal.JPG is no longer available

ManS-H

grovkillen wrote: ↑28 Jun 2018, 21:47 Could you update one of the misbehaving units to latest nightly?

@ grovkillen and TD-er,
I have all the three units updated to ESP_Easy_mega-20180625_normal_ESP8266_4096, and did a power cycle after flashing.

I will control ever day the state of the units. I keep in touch.

ManS-H

grovkillen wrote: ↑28 Jun 2018, 21:47 Could you update one of the misbehaving units to latest nightly?

Yes, i will do that tomorrow, and then i wil check every the log files.

ManS-H

Did the mega versions reboot or how did you first start to see the problem? And what versions are they running exactly? The first time i didnt see the temperature is Domoticz, then i reboot 'the ESP's. But it's strange that all the three ESP's are not visible. Now i reset the modem/router and then ...

ManS-H

Situation: Six several ESP devices, three with ESP Easy 145 firmware en three with ESP Easy Mega V2.0 firmware. All six connected with a modem/router of my provider (Ziggo in my case). With the three with 145 firmware i have never a problem, working now 260, 248 and 75 days. The three with the ESP E...

ManS-H

Oké. tomorrow i started with the fixture. I will tell you the results.

ManS-H

If your meter is 150 turns per hour per KW your calculation is correct! try it out it works perfect. Ive doublechecked it with a powermeter and by connecting a 400W light to the net. powermeter gave me 413W, my calculation 407W... The difference is probably a measuring error in the powermeter. Te b...

ManS-H

2xdehelft wrote: ↑04 Jun 2018, 16:13 The picture is just an example. took it from google

Even then, the meter shows the turn/kwh, not the time.

ManS-H

Yes I am using D0. I've tried the last stable 2.0 (ESPEasy_v2.0-20180322), the MEGA release (ESPEasy_mega-20180522) and the R120. The first to have the rising and falling options but same behaviore, double counts. The r120 does not have the falling/rising options, and also counts double. i've even ...

ManS-H

Yes I am using D0. I've tried the last stable 2.0 (ESPEasy_v2.0-20180322), the MEGA release (ESPEasy_mega-20180522) and the R120. The first to have the rising and falling options but same behaviore, double counts. The r120 does not have the falling/rising options, and also counts double. i've even ...

ManS-H

grovkillen wrote: ↑01 Jun 2018, 16:13 No only more going on in the background. We're still developing but need to test it by our self until we got it down.

Oké, clear answer. Thanks.

ManS-H

Hello, I feel I need to clear some things from the development side of things. We are fairly close on releasing a new stable version. Current development is called "mega". We released a candidate for v2.0.0 in last December, this RC was abandoned some weeks ago. When we release next stabl...

ManS-H

@ grovkillen and TD-er, i appreciate your work. I saw that r120 was from October 2016 and R147 was from November 2016 and now it's May 2018 and we have still no stable version. But is see a lot of requests, that's why i replied. And i now it's a hobby project what must done in your spare time. So i'...

ManS-H

I see a lot of question for options. Fine, but what i miss is a successor of ESPEasy_R120. With all respect, the rest are all experimental projects.

ManS-H

The Sonoff POW will be a separate binary, as soon as it is tested. The current implementation of the sensor used in the POW is taking a bit too much memory, so it cannot be combined in a single binary with all plugins. As written in the original post of this plugin, the HLW8012 is not used only in ...

ManS-H

TD-er wrote: ↑25 Apr 2018, 19:01 The Sonoff POW will be a separate binary, as soon as it is tested.
The current implementation of the sensor used in the POW is taking a bit too much memory, so it cannot be combined in a single binary with all plugins.

Oké, thanks TD-er.

ManS-H

For the PlatformIO environment, you can select it via the build selection box. It is not yet tested, I only uploaded it to my own POW, but it has not yet been run on 230V. The thing is the library for this chip does use a bit too much iRAM, so I cannot combine it in a 'normal' build. But on the oth...

ManS-H

On this moment i work with the papperone/LisaM version for my Sonoff Pow. I saw that TD-er did some changes on the mega-20180421 version. TD-er (7): [WiFi] Init static IP before connect to wifi [Toast message] Change "Settings saved" to "Submitted" [info] Add more build related i...

ManS-H

Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED... Yes, a BME280 on I2C. So changing the I2C address and problem is solved? Nope, I2C addresses are something on the I2C bus. You have to check the GPIO pins on the ESP module. The default setting for t...

ManS-H

grovkillen wrote: ↑20 Apr 2018, 17:19 Did you power cycle after the removed setting?

I will do that after changing the gpio. Thanks.

ManS-H

vader wrote: ↑20 Apr 2018, 17:16 If one line (SDA or SCL) from I2C uses GPIO2 (if this is LED), than change it to another free one in the hardware menu

GPIO ⇾ SCL: GPIO-2 (D4).

I will change it tonight. First i must pick up my wife from the airport.

Thanks for your help.

ManS-H

vader wrote: ↑20 Apr 2018, 16:32 Any hardware/software installed that uses the same GPIO port as the LED? I mean GPIO2 is the LED...

Yes, a BME280 on I2C.
So changing the I2C address and problem is solved?

ManS-H

vader wrote: ↑20 Apr 2018, 15:44 Wifi Status LED
GPIO → - None -

Yep, that is the default setting. But the led is still blinking.

ManS-H

Am I misunderstanding you when I tell you to deactivate it under the hardware page? Yep, that option did i saw, and my problem. But what to do exactly, i didn't find it in the Wiki: For example: Wifi Status LED GPIO → LED: GPIO 16 (D0) GPIO boot states: Pin mode 16 (D0): Output Low Is this correct?

ManS-H

Hello all, I have a question. Is it possible to switched off the Wifi Status Led? I used a Wemos D1 mini and a BMP280 for logging of temp, pressure and humidity in the bedroom. But its pretty annoying during the night to see the blinking of the Wifi Status Led. The first time i saw i was thinking it...

ManS-H

not better... I have downloaded to R120 and result is same. I think than syntax off the message is not understanded by espeasy program : SendToHTTP,192.168.x.x,80,/rcgi.bin/UpdateTagForm?TagName1=T_int_sonoff&TagValue1= [sonde#temperature] maybe a stupid question, but what is this: /rcgi.bin/Up...

ManS-H

hatoupix wrote: ↑11 Apr 2018, 18:34

Maybe this is helpfull: https://docs.tuya.com/en/hardware/WiFi- ... odule.html

ManS-H

Txus wrote: ↑11 Apr 2018, 16:42With the V2.0 ?

Wemos: GIT version: v2.0.0-dev13

Sonoff Pow: GIT version: (custom)

ManS-H

Thank you for your answer. I tryed with a "," between SendToFTP and ip@ with the same result. Do you know one way to log or monitor TCP output from SONOFF ? I work with a Wemos with a switch and a Sonoff basic. On the Wemos i used a duo color led for the status of the Sonoff. On the wemos...

ManS-H

Hello, I try to send, from sonoff TH16, upgraded with espeasy 2.0, messages by HTTP (temp & dew) i would like to are sure that my rule is done. Wireshark isn't log any HTTP message from sonoff to my server. My rule : On System#Boot do timerSet,1,10 endon On Rules#Timer=1 do SendToHTTP 192.168.x...

ManS-H

Nice piece of work. Top.

ManS-H

In the wiki is this available: https://www.letscontrolit.com/wiki/inde ... erProjects

ManS-H

It is a lot easier to work with PlatformIO + Atom, since then you have more control over what is being used. With the Arduino IDE, you'd better create a "portable" installation and only install the absolute minimum plugins in there (ESP8266 version 2.3.0) and copy the libraries directory ...

ManS-H

I would 1st delete all devices I don't need/use from the src folder (.ino files). Restart Arduino IDE and look if the warnings are less/gone now.... 2nd: check for updates of the libraries. vader, i tried several things. Removed arduino-1.8.5 and installed 1.6.12 what was described in the wiki. Sam...

ManS-H

What do i wrong? 1 - install of arduino-1.8.5 2 - Preferences: http://arduino.esp8266.com/versions/2.4.0/package_esp8266com_index.json Here i installed the 2.3.0 version 3 - Download from GitHub: ESPEasy_v2.0-20180227 and extract the files 4 - Copy from source/lib all the files to C:\Program Files (...

ManS-H

It's what Vader said, change the "." in "," and then it will work.

ManS-H

ulfh2018 wrote: ↑20 Feb 2018, 05:07 Thanks a lot -- but I'm not very familiar with this IDE. I tried to start the library manager, but was not able to find anything like library core 2.3.0.

Maybe this is helpfull:

: 230.JPG (111.09 KiB) Viewed 6865 times

ManS-H

Thanks Lisa,

but life is not only programming.

ManS-H

use a gpio for a external relay.

ManS-H

I don't have program skills so rules and blocky are a good alternative for me.

ManS-H

Firmware status: Alpha Firmware version: v53 Firmware installation instructions Download esptool: https://github.com/espressif/esptool When doing a FRESH install, ERASE your ESP32 FILES area: LINUX: esptool.py --port /dev/ttyUSBx erase_flash WINDOWS: esptool.py --port COMx erase_flash The FLASHBINA...

ManS-H

Just checked the espressif site to see if they have anything new and saw this http://espressif.com/en/media_overview/news/esp32-design-contest-2018 Looks like a new dev board and esp32 chip I have not seen yet. Of course the oppertunity to get a dev board free is a nice option. I have not read the ...

ManS-H

Looks good.

Meek, do you also think of a kind of remote control switch, especially for Sonoff users?

ManS-H

I know, it was indeed a difficult search for me too. I've found them at AliExpress : https://nl.aliexpress.com/item/circuit-board-copper-wiring-terminal-PCB-wiring-column-Connector-switch-terminals-100pcs/32747349611.html?spm=a2g0z.search0104.3.15.9c7SZI&ws_ab_test=searchweb0_0,searchweb201602_...

ManS-H

@grovkillen,

Buttons and Sonoff's are working with the rules. It was a lot of reading to understand the mechanism of rules. But with your samples i have now a working solution, Thanks

Search found 281 matches