Let's Control It

moelski

Hi ! Well this one is caused by you having the "servo" library included in the Arduino library manager Ok but that souldn´t be a real problem ... And just to be sure, you are using the latest sources? I used ESPEasy-mega-20200913. https://github.com/letscontrolit/ESPEasy/releases/tag/mega-...

moelski

Hi ! This text could be a little bit longer ... Sorry for that 8-) Yesterday I started to take a look at EspEasy again. I was using it 4 years ago and at that time I wrote the candle plugin for EspEasy. My goal was to include some of my switchable power plugs into my home automatisation ioBroker. So...

moelski

Hi ! I also checked, but at least C003.ino doesn't have this line split over multiple lines No it´s fine in one line ... Can you add (as a test) this as 2nd line of the DelayQueueElements.cpp file: x106-elf-gcc/2.5.0-4-b40a506/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/bin/ld...

moelski

Hi !

First Lines of Espeasy.ino:

Code: Select all

#define USE_CUSTOM_H
#include <Arduino.h>

and attached is my Custom.h.

For me it looks ok ... Try to build for ESP8266.

Dominik

moelski

Hi ! Just try to compile the latest mega release with Arduino IDE. I use a custom.h for configuration. If I just select #define USES_C002 // Domoticz MQTT I got this errors: C:\Users\DOMINI~1\AppData\Local\Temp\arduino_build_623874\sketch\src\ControllerQueue\DelayQueueElements.cpp.o:(.literal._Z24pr...

moelski

Hi ! Ok I can compile it again if I use the latest GIT revision. Thx for that fix ! Get it compiled for the ESP32 seems to be a little more complicated :roll: I had issues with MD5Builder, Servo Lib and BH1750 ... But I think ESP32 is in general another story ;) btw ... Got it compiled after some tw...

moelski

Hi ! The last two days I spend some hours to get ESPEasy compiled in Arduino and Arduino Pro IDE. But I had no luck ... So a simple question first ... Is it still possible to use those IDE's or can it only be done woth VSCode / PlatformIO? My steps were as followed: * Copy content from lib folder to...

moelski

Great work Paul.

I think there is one command missing for using default colors or not.
But that is missing in the sources ... I have to add that in the next days.

Anyway ... Your solution looks great.
Personally I use FHEM and I will update my manual for FHEM usage, too.

moelski

Hi everybody. I decided to not longer spend time on this PiEasy port. There are to many problems left and the overall performance of the resulting code is to bad. I think on a Raspberry you can handle the things better with threads instead of timer. And I definitely need serial (and maybe USB) input...

moelski

Ok you can send it to dominik AT logview DOT info.
I will have a look.

moelski

Hi Mariete,

looks nice, but I think the main problem is that it´s a fire simulation.
And at y candle you don´t have this huge flame nor such sparkles flying around...

Did you include it into my code?

moelski

Ups ...

You are right ... I got that wrong. Sorry for that.

Anyway ... Some kind of roadmap would be nice to know

moelski

Hi ! We have to send the hex value: 0x00 both off 0x01 relay one on 0x02 relay two on 0x03 both relays on ..but how? Hmm Looks like simple send some data over the Serial port. But I wonder a Little about the INT / E-FW Connection. But sending some data within a new plugin is really straight forward ...

moelski

Hi ! http://www.ebay.com/itm/ESP8266-220V-10A-DC-7-30V-Network-Relay-WIFI-Module-/182150587112 https://www.olimex.com/Products/IoT/ESP8266-EVB/open-source-hardware Should work. But as always ... You should know the schematics of the board. Getting ESPEasy running is not the Problem ... http://www.eb...

moelski

Hi ! Just give the latest Github Version a try. I used Arduino 1.8.0 as IDE ... It seems that there are some Problems with the MQTT Connection. I get always this Messages in the logging: WD : Uptime 8 ConnectFailures 30 FreeMem 23712 MQTT : Connection lost MQTT : Connected to broker followed by a ne...

moelski

Hi @all,

have done some work to enhance the documentation:
http://www.logview.info/Temp/CandleNotes.pdf

I will update the doc with information how to Setup FHEM and how to use MQTT.

moelski

Hi devs, the last weeks where a little bit busy for me so I was not often logged in here. Anyway ... I saw that the github ESPEasy repo got the last release update at 27-11-2016. So how would you guys go on with this project? There was an anouncement some weeks ago that there will be a new repo on g...

moelski

Hi burton666,

will check it today. I´m actually working on embedding the candle into my FHEM homeautomatisation system.
I will compile it with 147 and see if there are any problems left ...

moelski

@bertb:

zo I reworked the code a bit.

Did you put update the github code?

Code: Select all

Works as expected. (Even better than I expected, I couldn't believe it would work out of the box!)

moelski

Hi ! PiZero bought at 0.99$ WOW :shock: Do you have a link for that ? Maybe this could also work on the Orange PI family I think this will not work out of the box .... OrangePi and Reasperry Pi using different cores. And the RasPiArduino has a lot constants / definitions which refer directly to the ...

moelski

Hi @all, some days ago I found this awesome book from Neil Kolban: https://leanpub.com/pi I was really impressed about the huge amount of information he gave to us. For everyone who is interessted in the Pi this is a must to read 8-) And at some point I stumbled about a project introduced by me-no-d...

moelski

Hi ! Well I made a lot of simulations at Saturday and gave my best to get this sensor up and running. But at the end I failed :shock: The Schmitt Trigger did not work as expected and it took to much time to get usable results. So I decided to give another approach a try - Arduino Nano. It is much ea...

moelski

Also works in very noisy environment ...

moelski

Hi !

Did not work well for me in MultiSim ...
I did some tests and this could work fine ... See pictures.

But I have to figure out what voltage output comes from the IR-reflection sensor.
Will measure that and put it into the simulation ...

moelski

Hi Shardan, Today I had the same issue again :cry: i would have given that additional capacitor and two more resistors making it into a precisely working tool. Not much of cost at all. So you mean replacing the trim by two resistors and place a cap at the resistor which has the ground connection, co...

moelski

Just placed 100k between D0 and A0 and it seems promising

No more linear behaviour ... I will test it at my gas meter.

moelski

And you got the wrong picture. I am using this here:

moelski

Hi ! That´s exact the problem. I have the circuit on my desk and if I use a piece of metal I can see that there is a small range where the output is not HIGH and not LOW. The Output LED is dimmed ... And that is exactly the range where I have the problems with multiple counts ... Will try your sugge...

moelski

Hi ! I don´t wanna be the grinch here :roll: but I think the ESP32 will be a different story than the ESP8266. And to be honest I have my doubts that ESPEasy can converted easy to the new platform. First of all the ESP32 has always a RTOS (RealTime Operating System) : http://www.freertos.org/about-R...

moelski

Hi Martinus,

Bug #07 OPEN : Pulse counter total increases every second without pulse? - Unable to reproduce...

maybe this is the bug I´m having, too:
viewtopic.php?f=6&t=2377

moelski

Hi @all, today I setup a small project. I need a counter for my gas meter in the basement and I used a IR Sensor to detect this little silver plate on the last number of my meter. Works like a charme and ESPEasy was setup quickly with a pulse counter. But then things got strange ... The gas meter st...

moelski

Hi !

I wrote a SD card logging plugin. And I used the given plugins as sample.
So take a look and give it a try. It´s not that complicated.

Have you any specific questions ?

moelski

Hi @all, I had some busy days in the last weeks so I was not really able to follow all questions here ... But it seems that there are some guys which have problems getting the candle up und running :o So i think it would be the best to write a new tutorial with all steps explained in detail. Hopeful...

moelski

Schould be ok if you have a solder iron ;) Do I need more to get the temperatur online ? Access Point 8-) Are there other options than NodeMCU ? Yes, almost every ESP8266 should be able to drive the DS18B20 ... Which is the difference between NodeMCU v3 and v1 http://frightanic.com/iot/comparison-of...

moelski

Hi !

Take a look at this page:
http://www.stall.biz/project/esp8266-es ... ffi-und-co

Sorry it´s in german, but google should help

moelski

Arduino-ESP32 ...
Yesterday I asked the developers when DNS and Webserver are implemented:
https://github.com/espressif/arduino-esp32/issues/27

It seems that there are general problems with the network which have to be fixed first ...
So we have to stay tuned on this

moelski

Hi ! have you had the change measure it? I flashed a WifiScanner and let the LED flash during each scan. So I assume the Wifi part is switched on. I have ~125mA with the onboard LED off and ~127mA with the Onboard LED turned on. But keep in mind that I use a Nano32 which has a lot onboard stuff like...

moelski

Hi ! Maybe you missed this one: There is one thing in the github version that I had to add to make it compile and run and this was to define the variable "timer25ms" using: unsigned long timer25ms; This is placed next to where the "timer100ms" is defined. I have fixed that in the...

moelski

Hi,

@Martinus:
Wouldn´t it be better to open a new topic for your neopixel plugin?
It get´s a little bit offtopic here

moelski

Hi @all, ESP32 - First Tests with ESPEasy ok this morning I gave the ESP32 a try :ugeek: As mentioned yesterday I have a Nano32 board (and a ESP32 modul). 1. Setup the dev environment with Arduino https://github.com/espressif/arduino-esp32 2. Run Blink Then I started with a simple Blink test and an ...

moelski

Hi ! There is one thing in the github version that I had to add to make it compile and run and this was to define the variable "timer25ms" using: I will correct that on github. Thx for the hint This may require one additional value (white) to be sent Why did you need an additional value? W...

moelski

Hi ! Just got my Nano32 last week and this week I get a ESP32 module (without dev board). 8-) nano32.jpg I will give compiling ESPEasy a try ... but honestly ... I don´t think all stuff will work. :D There are some big differences in ESP8266 and ESP32 (the biggest is the existence of RTOS in ESP32)....

moelski

Hi ! ....it is possible to connect 2 or more PCA9685 board to drive more than 16 channel of PWM outputs??? I think it´s not possible at the moment. The I2C address is hardcoded: Wire.beginTransmission(PCA9685_ADDRESS); If not....are planning to implement this feature??? I think no - even if I am no ...

moelski

Hi !

Something like mysensors

But I don´t know if there is any precompiled stuff.

moelski

Hi @all,

I just placed the source code on github in the Playground. Hope it gets merged, soon

@timsson:
The code is for fastled - I´m using Adafruit Neopixels.
Anyway. The Fire simulation seems to be convertable. I will check that

moelski

Hi Martinus, I flashed the 141 today and at first it looks ok. But ofter some tests it seems that the problem still exists. This is what I did: * Compile & Flash R141 * Enable Web and Serial Logging * Set Loglevel serial to 2 (Default) At this stage everthing seems to be ok. But after setting th...

moelski

Code: Select all

If you're using the filesystemcheck(), it seems impossible that you are running the release candidate image

Ok you got me

Anyway ... Would be a simple fix for people who compile the code (like me)

moelski

Hi Martiuns,

did you see a chance to make some small improvements here?
http://www.esp8266.nu/forum/viewtopic.php?f=6&t=2172

moelski

Hi Martinus,

this is strange

I will try the latest Github version today and test if it works better ...

moelski

Hi @all, today I installed a SOnOff with ESPEasy R136. It´s just a plain R136 compilation with the switch input and 2 system information tasks. I included the SonOff to my FHEM setup and just call http://192.168.xxx.xxx/control?cmd=GPIO,12, 0|1[/b] to switch the relais on or off. This works - mostly...

Search found 161 matches