Let's Control It

tozett

timer are mentioned/explained in the RULES-section here:
http://www.esp8266.nu/index.php/Tutorial_Rules#Timer

does this help?

tozett

Have you tested a little bit with the conditions part? sorry, what do you mean? RULES in Espeasy? need some explanation? i played with the RULES in espeasy .... :roll: i like the same you like: to control a whitelist on my homeserver. i think, the cheap reader will only send IDs, if they are on the...

tozett

the manual is somehow...chinese...and as only one addition: you can define a chip/tag or a special finger as a "learning"-Tag. hold it to command the reader into learning a new tag/finger, it beeps, than present the new tag/finger. And the reader has learned it. i would be difficult to pus...

tozett

hi, thanks for interest. all works well with the espeasy (wating for bugfix for different IDs from TAGs from MQTT/LOG and SendToUDP :oops: ), before i mount it on the door. i wanted to do this today, but i wait... but the fingerprint reader is fast and (as far as i can tell) reliable. it reads 4001-...

tozett

since i follow the version/rom upgrades, i always had this similar issues with error-reboots after upgrade. mostly i had assumed the flash-information left over caused this. peter scargill reported similar and had a total solution. maybe one has to try this, but it wipes all conifg. maybe one makes ...

tozett

i played with my new nfc-board and different tags, so it seems to be a bug (i am on v109) : while sending the tag-id from RULES it is different from MQTT. but as i used different types of tags, it looks to me like the TAG-ID from RULES seems to be more the VENDOR, than the ID itself.. ??? :? :? :? :...

tozett

i build a new nfc-reader with espeasy on a gizwit module.
it lacks 3.3V, but i found it on a pin of the LDR.
it seems that both pcb's run alone from usb-power.
did not test if i still need the reset-line, so left it in at first.

tozett

as plattfrom version went up from 2.0 to 2.3 now and espeasy improved up to v109, and there is a i2c streching option (how to use?), i dont know if the reset-function is still needed to have nfc proper working. :roll: :roll: :roll: meanwhile i also ordered a new version of nfc-boards from aliexpress...

tozett

coool, should go into wiki ...

tozett

May use rules for Timer? Look rules up on the Wiki ...?!

tozett

Search here for the " pro Mini extender"

tozett

hi,
the tag-id from the RFID reader is on MQTT and in the Web-Gui the same,
but different if i send it from RULES:

Code: Select all

  SendToUDP,192.168.14.253,4751,[rfid#Tag]

is this as it should, or could this be made the same ID on all channels?

look:

tozett

thanks a lot for fast and this much information,
i will go that way with strong pullups and multimeter checking... think you pointed me in the right directions.

by the way: wonderful ESPeasy! keep on counting firmware upwards ..

thanks a lot, ozett

tozett

hi, i experimented with my fingerprint-reader http://www.esp8266.nu/forum/viewtopic.php?f=5&t=1617 and had the idea to use the pro-mini-extender as a sort of "level" shifter for 3.3V-5V conversion. that arised my question: do i need a level-shifter the 5V pro-mini (or 5V nano) --> to f...

tozett

i set plattform to 2.2.0 and got a build, but with the same hints as in 2.1.0 ID:\daten\olaf.arduino\arduino-1.6.5-r5\libraries\IRremoteESP8266 C:\Users\olaf\AppData\Local\Temp\build6597881346912999724.tmp\ESPEasy.cpp -o C:\Users\olaf\AppData\Local\Temp\build6597881346912999724.tmp\ESPEasy.cpp.o _P0...

tozett

i left all the same, but updated board manager to esp-plattform 2.3.0 and compiled ok with this warnings: -IC:\Users\olaf\AppData\Roaming\Arduino15\packages\esp8266\hardware\esp8266\2.3.0\libraries\ESP8266HTTPUpdateServer\src -ID:\daten\olaf.arduino\arduino-1.6.5-r5\libraries\IRremoteESP8266 C:\User...

tozett

i compiled just for me wemos-d1 mini, with pubsubclient v2.6 on arduino-ide 1.6.5 and platform 2.1.0 without bigger issues. only this little hint poped up: C:\Users\olaf\AppData\Local\Temp\build7720517566021989786.tmp\ESPEasy.cpp -o C:\Users\olaf\AppData\Local\Temp\build7720517566021989786.tmp\ESPEa...

tozett

may change the first topic-header to "SOLVED" ?

regards.

tozett

: level.png (236.09 KiB) Viewed 44749 times

tozett

an adventure ended here: the 74HC4050 are only uni-directional level-shifter. it could have worked, but i failed with these ics again. than i went back to my nano and the wiegand-sketch. this worked. i could send to UDP, after tryout of different libraries for the ENC28j60 Ethernet ship. one had CC ...

tozett

i think, the devs will not build everything what is on the whislist...
but how knows... i had a lot of points sticked on that list.
maybe this could help you in the meantime...?

https://github.com/jpmens/mqttwarn

tozett

a compiled version must match your ram settings, and the devs provide a a compiled version only for their next "super-stable" build. meanwhile you could compile one yourself. its easy. lots of infos here in the forum, and a description on the wiki: http://www.esp8266.nu/index.php/Tutorial_...

tozett

your esp-modules are on your net 192.168.1.x, and your mosquitto-server is in a different net 192.168.0.x (look at your screenshots). are you shure, you can reach clients from one net on the other? maybe you check your networking-setup regarding this routing? ---- oop,s sorry . didnt saw your postin...

tozett

http://<ESP IP address>/control?cmd=mcpgpio,<pin>,0

see: http://www.esp8266.nu/index.php/MCP23017

or local with rules:

Code: Select all

on Rules#Timer=1 do
  gpio,2,0 // close valve
endon

see: http://www.esp8266.nu/index.php/Tutorial_Rules

tozett

what is your environment?
arduino ide version, plattform version? ...
maybe check working versions here: http://www.esp8266.nu/forum/viewtopic.php?p=7763#p7763

tozett

hi, i had the same settting with my gira homeserver (not loxone), i can suggest building something in-between, like node-ned and communication at first everthing over mqtt, than from node-red to upd (or anything else). this is more powerful, but also simple to employ. there is information here in th...

tozett

i am no developer, but could this be the way to go for automatic release building?
https://travis-ci.org/

tozett

mine is working in ver 107/108

tozett

may look here:
http://www.esp8266.nu/index.php/Tutoria ... are_Upload

tozett

: sub2.png (50.04 KiB) Viewed 31958 times

tozett

tozett

some wish to the developer..hope they read here,
or you put this (if it is not already) tho the thread: "feature-request"

tozett

with mqtt you can send values of the sensors to every mqtt-client (app,linux, whatever listens to mqtt),
and than build an action. there is some information here in the forum and on the web.
may you start with an experiment?...good luck

tozett

may you want to improve MQTT dying with the last-will-testament?
here is a discussion/solution...

http://www.esp8266.nu/forum/viewtopic.p ... ment#p6439

so i think, you could check for timeout of last-will, than reboot..

tozett

good hint, should go to the wiki, to have an actual working settings for all who are new to espeasy. compiling is an often mention problem ... there was once an idea by the devs, to have an automated build-system. there was an example on hackaday with the use of travis from github. maybe that is ano...

tozett

thanks, now that i prooved to myself it is working, i google for easy and foolproof level-shifting from weigand 5v to espeasy 3.3 volt. it seems that the 74xxxCMOS logic ICs could do...i will report. i checked the wiegand code in espeasy and it seems to work like on the arduino/nano with falling edg...

tozett

i am happy, another sketch working.
i found the arduino-wiegand-library _not_working
but this sketch working succesfull. great
now (as i am no developer) i have to check, if the code has some hints for the espeasy firmware,
or if i have to stuck with an arduino (+espeasy)...?

tozett

my soul could not sleep... and i succeeded: i searched the web, put the fingerprint on an saintsmart uno (5v tolerant inputs, i guess), tried one failure sketch, a second failure and than: a third sketch from 2011 with sucess!!! :mrgreen: :mrgreen: :mrgreen: :mrgreen: now i have to dig, why ESPeasy ...

tozett

another day, another idea... i ordered a simple oszilloscope, DS201, to see if i can see something more, and meanwhile i think about logic-level, and if i use a voltage divider instead a level-shifter... https://learn.sparkfun.com/tutorials/logic-levels http://electronics.stackexchange.com/questions...

tozett

i searched and think: if the fingerprint wiegand d1/d0 had logic-level of 3.3v, my setting with the mosfet level-shifter may distroyed the 3.3 side? because the level-shifter needs 5V on the high-volt side, which had maybe be gone into the 3.3 logic of the fingerprint-reader on wiegand d0/d1? dont k...

tozett

anybody here?...ok diary...

i have another fingerprint-reader from china...to check against...
i wired 12v+gnd, and measured D0 and D1 with 3.3V....

shouldnt it be 5V for wiegand?
or my voltmeter is broken?
or is the reader output on D0/D1 logic-level?

hmmmm, google, may you help me?

tozett

another day later... i have blown two of my wemos with 12v per incident, my volmeter slipped and made a short... i checked the level-converter: the diagram fooled me. i measured 5V in on RXi, but on the Low-Volt-Side i measured 3.3 on TXi so it must be RX-TX from High-Volt to Low-Volt. i fooled myse...

tozett

your welcome!
like to see further sharing of interesting new ideas..

tozett

after flashing a first firmware with a minimal ram-config, you can see in the serial-monitor (start before flashing) the erase-process, it runs longer than the flashing-finish message!!! take your time and wait for the end. make a cold reboot (power off/on). go to serial. issue "erase" or ...

tozett

ok, google. thanks for that: In Wiegand 26 / Wiegand 34 / Wiegand 36 and all other Wiegand protocols used 2 wires (D0 and D1) to connect reader to MCU. In standby D0 and D1 connected to VCC(+5V). All data from reader goes in binary format - If reader transmitting 0, it connecting D0 wire to ground f...

tozett

i thought over it, and i found i have no clue if how i need to connec tx/rx for Wiegand D0/D1 through the level shifter... i have actually only on the 5V side coming D0 (wiegand) in on RXi, and coming out on the 3.3 to the esp-easy. the same with D1 (wiegand). that gives me only input from 5V to 3.3...

tozett

INIT : Booting Build nr:107 WIFI : No SSID! INIT : I2C INIT : Boot OK INIT : Normal boot >wifiscan WIFI : SSID Scan start WIFI : 5 networks found WIFI : 1: ***** (-78) WIFI : 2: ***** (-41) WIFI : 3: ***** (-87) WIFI : 4: ***** (-42) WIFI : 5: ***** (-87) Ok >wifissid ***** Ok WD : Uptime 0 Connect...

tozett

I need help. i have a brandnew x660 fingerprint from aliexpress (https://www.google.de/search?q=x660+fingerprint) i assumed, that the wiegand protocoll would give me the ID of my fingers from the fingerprint. i learned through the wiki, to use GPIO 0 and GPIO2. i configured this in the ESPEASY, but ...

tozett

try to set wifi-settings on the serial montior.
cmds are listed here befor in the thread.
do another cold-reboot (power off/on)?...
see if this helps..

tozett

or try crossing the serial pins, will erase too (multiple times mentioned here in the forum, you find this with the forum search...)

Search found 734 matches