Let's Control It

fluppie

Great! Keen to try it out.

fluppie

I was using the staging versions, using the 2.1.0 stable tree everything compiled just fine.

Is there documentation regarding the rules. Can one make rules like "if GPIO0 = 1 then GPIO14 = 1 else GPIO14 = 0" ?

fluppie

I'm trying to build R90 with Arduino 1.6.8 and ESP Core 2.1.0 rc2 Arduino: 1.6.8 (Windows 8.1), Board:"Generic ESP8266 Module, Serial, 80 MHz, 40MHz, DIO, 115200, 1M (256K SPIFFS), ck, Disabled, None" Build-opties gewijzigd, alles wordt opnieuw gebuild C:\Users\Philippe\Documents\Arduino\E...

fluppie

And a more trustworthy result on the second poll. But is reads 3 hPa higher then my two BMP085 modules.

fluppie

Mine is working but there is something weird with the read-out on the first poll. I use a ESP-201 Dev Board with GPIO2 and GPIO0 as I2C bus.

fluppie

I have the impression that sometimes the ESP is locking up with the later releases. I have 2 Wemos D1 modules and 5 Wemos D1 mini modules.
Or it could be when the software is fetching data from the sensors or writing to the OLED display it is ignoring the webinterface requests.

fluppie

Same here, 2 sensors are found by the I2C scanner but it's not working.

fluppie

Some info I found about the BME280:

https://github.com/RyAndrew/esp8266_i2c_bme280
https://github.com/sparkfun/SparkFun_BM ... no_Library

fluppie

If you need inspiration: http://harizanov.com/wiki/wiki-home/thr ... tat-board/ and the code (not Arduino) https://github.com/mharizanov/ESP8266_Relay_Board

fluppie

Powerful OLED lib: http://blog.squix.ch/2015/12/esp8266-ol ... lease.html
Code: https://github.com/squix78/esp8266-oled-ssd1306

Then we can play with fonts, flip/rotate the display

.

fluppie

As I use the Arduino environment (also the new 2.0 release on 1.6.5), I can confirm this works perfectly. Also it auto sets program mode, very easy

. You just hit upload, no need to reset and pull up/down some GPIO's.

fluppie

I have 2x Wemos D1 and 1x Wemos D1 Mini and also the end-of-life Wemos Lolin. All running fine

.

fluppie

I flashed 1 (the ESP-201 DEV Board) of the 4 ESP's I'm using. The other 3 are 2x Wemos D1 and 1x Wemos Lolin ("Nodemcu v1.0"). I also have 2 Wemos D1 mini on the way to flash with the 2.0 release.

fluppie

R48 is compiling. Will flash some devices later today.

fluppie

One can always compare the libs

. https://github.com/adafruit/Adafruit_BME280_Library

fluppie

Mine will be here in +- 14 days I guess

.

fluppie

Or maybe blank display during the night an/or a blank display during 5s every minute?

fluppie

HTTP is already very nice, MQTT will be even better.
Should we implement a "screensaver" function? Is the OLED display sensitive to "burn-in" ??

fluppie

Arduino 1.6.6 (https://www.arduino.cc/download_handler.php?f=/arduino-1.6.6-windows.exe) Latest staging release 2.0.0-RC2 (http://arduino.esp8266.com/staging/package_esp8266com_index.json) Libraries from R039 stable (http://sourceforge.net/projects/espeasy/files/ESPEasy%20R039.zip/download) Arduino:...

fluppie

Also working here on a ESP8266 Dev Board

.

: R46.PNG (23.3 KiB) Viewed 29809 times

fluppie

Working

!!

: IMG_6397.JPG (105.82 KiB) Viewed 26735 times

fluppie

Nice!! I was trying to develop this plugin as I tried out Nathan Chantrell's WiFi MQTT display code (http://nathan.chantrell.net/20141230/wifi-mqtt-display-with-the-esp8266) for the ESP8266. I used the esp_mqtt example from the Cherts Dev Kit (http://www.esp8266.com/viewtopic.php?f=9&t=820). MQT...

fluppie

: RH_difference2.PNG (28.55 KiB) Viewed 3813 times

fluppie

Any idea why? Temperature is on par...

fluppie

I have 2 HTU21D (should be software compatible) boards and they also don't work. Will try with the 13/12 bit setting. DHT : Temperature: 23.90 DHT : Humidity: 52.50 SI7021 : Res=0x1 => Error 0x1 SI7021 : Read Error! WD : Uptime 16 ConnectFailures 0 FreeMem 29296 DHT : Temperature: 23.70 DHT : Humid...

fluppie

Fixed some issues with the TSL2561 code. It had broken out of range handling which actually would cause the ESP8266 to reset itself under low light conditions due to division by zero. Also made a correction to the range. it was fixed 4900 while it actually dependant on the selected integration time...

fluppie

Inspiration for local control/wifi thermostat: https://github.com/mharizanov/ESP8266_Relay_Board

fluppie

I have 2 HTU21D (should be software compatible) boards and they also don't work. Will try with the 13/12 bit setting.

fluppie

Martinus, you're welcome! Another one R38 has TSL2561 I2C Luminosity sensor (If pull request is accepted) See request here https://github.com/ESP8266nu/ESPEasy/pull/7 Merged into master, really closing in now: Sketch uses 426,922 bytes (98%) of program storage space. Maximum is 434,160 bytes. Got 2...

fluppie

: ESPeasy_2.PNG (24.49 KiB) Viewed 7556 times

fluppie

: ESPeasy_1.PNG (16.72 KiB) Viewed 7556 times

fluppie

.sitemap file sitemap demo label="ESP Easy MQTT" { Frame label="Sensors" { Text item=SlpkPhil_temp Text item=SlpkPhil_temp2 Text item=SlpkPhil_press Text item=Bureau_temp Text item=Bureau_temp2 Text item=Bureau_press /* Text item=Flukso_power */ Text item=Switch1 Switch item=Rela...

fluppie

The delay/last updated isn't the same. So I think sometimes an URL fails to post. Does it call 2 times the JSON url?
I have 2 sensors (DS18B20 and BMP085) per node.

fluppie

It works pretty well, only weird when you connect a second sensor:

: emonCMS.png (22.42 KiB) Viewed 9313 times

Do you call by accident the post URL 1 time per connected sensor? Not a bulk data "post" URL for everything?

fluppie

Working fine! Thanks a lot

.
http://emoncms.org/Schilde/espeasy

fluppie

Looks like it works using your staging version. I used the Nodemcu v1 board with the Wemos D1 hardware.
BTW, I tried the current staging version, http://arduino.esp8266.com/staging/pack ... index.json , but it doesn't work.

fluppie

Hi, Do you think it would be hard to modify the Domoticz code to have support for emonCMS? I think the "node" from emonCMS is similar to the "idx" from Domoticz. If you go to http://www.emoncms.org and login with username esp8266nu & password esp8266nu There you can read the ...

fluppie

Yes, I use this board manager URL: https://github.com/wemos/WeMos_Boards/r ... index.json
I'll try yours! Maybe it doesn't work because of the OTA functionality (I think this takes a lot of flash memory).

fluppie

Hi, Is the Wemos D1 (http://www.wemos.cc/d1/Main_Page) supported? I'm having weird resets. INIT : Booting Build nr:30 WIFI : Connecting... . . . . . . . INIT : I2C ctx: cont sp: 3ffec790 end: 3ffece50 offset: 01b0 >>>stack>>> 3ffec940: 00000507 00000000 0000000a 00000000 3ffec950: 00000022 3ffec990 ...

Search found 89 matches

Re: ESP Easy Releases

Re: ESP Easy Releases

Re: ESP Easy Releases

Re: BME280 Connection

Re: BME280 Connection

Re: ESP Easy Releases

Re: HTU21D Sensor?

Re: BME280 Connection

Re: Hi from USA Massachusetts

Re: OLED I2C

Re: Wemos D1

Re: Wemos D1

Re: Arduino ESP Core 2.0.0. release

Re: Arduino ESP Core 2.0.0. release

Re: BME280 Connection

Re: BME280 Connection

Re: OLED I2C

Re: OLED I2C

Re: Soon to come: Arduino ESP Core 2.0.0. release

Re: I2C on GPIO 0 + 2

Re: OLED I2C

Re: OLED I2C

Re: DHT22 vs SI7021 big RH % difference

DHT22 vs SI7021 big RH % difference

Re: support for si7012 i2c temp/hum sensor

Re: ESP Easy Releases

Re: Discussion on local control by ESP Easy

Re: support for si7012 i2c temp/hum sensor

Re: ESP Easy Releases

Re: openhab example for reading DHT22 sensor

Re: openhab example for reading DHT22 sensor

Re: openhab example for reading DHT22 sensor

Re: Support for emonCMS / Similar to Domoticz HTTP

Re: Support for emonCMS / Similar to Domoticz HTTP

Re: Support for emonCMS / Similar to Domoticz HTTP

Re: Support for Wemos D1?

Support for emonCMS / Similar to Domoticz HTTP

Re: Support for Wemos D1?

Support for Wemos D1?