Let's Control It

iron

Checking on Tasmota's work in an effort to save me any headache if possible on the WT32-ETH01 (should be coming in soon) * {"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE&...

iron

If there is no WiFi, ESPEasy boots in the default IP but at AP mode so they do not associate with each other.
Where do you have the conflict ?

iron

MCP23017 is not available on the eth .bin of the ESP32

-D

iron

NTP, DST and Location settings work great for me in terms of time.

MCP23017 has been stable in ESP8266 for a long time now.

-D

iron

TD-er wrote: ↑19 Nov 2020, 19:38 Have you tried the "eth" builds?

Yeah, i have a few Olimex ESP32-POE working stable on the eth builds.

I wish there was support for more Enviroment and switch (MCP23017) devices.
(Not sure how a GPS module is useful to a wired module)

-D

iron

Anyone has any experience with this ESP32 / LAN8720 module ?

Product Page :
http://www.wireless-tag.com/portfolio/wt32-eth01/

Datasheet:
https://tinyurl.com/WT32-ETH01

AliExpress:
https://www.aliexpress.com/item/1005001739834076.html

-D

iron

Out of curiosity... why the 2 AC adapters ?

-D

iron

How far is "far"? At least In now understand your desire to keep the AP mode active. Many cases require a "stand alone" mode in locations where internet connectivity is not an option. ESP has enough gpios and ESPEasy has a great rules engine that makes it ideal for this. I belie...

iron

That's for the guest network? I've not seen that option in the normal WiFi.. when I still had a Fritzbox router. It is widely known as a client-to-client-isolation at the AP level on most WiFi devices But the http request shall return via the gateway so it should work anyways unless there is no oth...

iron

Something similar (if not identical) to this :

https://nodemcu-build.com/

Would be a definite plus to the ESPEasy

-D

iron

Did you try any of this ? :

https://espeasy.readthedocs.io/en/lates ... -available

-D

iron

This is how I get a push notification on my android every tine a certain gpio triggers

Code: Select all

sendtohttp,notifymydevice.com,80,/push?ApiKey=[yourFreeAPIkey]&PushTitle=HighEntry&PushText=[Input#State]

-D

iron

Misiu wrote: ↑21 Sep 2020, 12:05 @grovkillen any updates?
I'm following your dribbble and patreon pages.
I hope we will be able to try the new stuff soon

The guys said will release it very soon.
We need to stop asking the same every 6 months !!!

iron

Sounds like an IP conflict. Try setting a static IP from outside the DHCP lease pool.

-D

iron

Have you set the port to 65500 in the advanced menu ?

-D

iron

dynamicdave wrote: ↑02 Apr 2020, 08:26 Hi,
I've tried the following FW on a WeMos D1 Mini and can confirm the Rule Set selection is WORKING again.

ESP_Easy_mega-20200328-15-PR_2972_normal_ESP8266_4M1M.bin

Does the drop-down appear on the top for you ? (when in full screen, desktop) \\

-D

iron

Hello,

Seems like you have a dot instead of a comma between 9.0 / 9.1

Should be

mcpgio,9,1
mcpgpio,9,0

-D

iron

Martinus,

Great to see you back.

Considering working on the ESP32 part of the ESP Easy dev ?

-D

iron

Unless you do not want to involve MQTT and enable the ESPEasy P2P Networking. You will have 2 units 1 and 2 Unit 2 : on System#Boot do monitor,mcp,1 endon on mcp#1=1 do sendTo,1,LichtgrHalleVorne,1 endon Unit 1: on LichtgrHalleVorne=1 do mcpgpio,1,0 endon here: https://www.letscontrolit.com/wiki/ind...

iron

Hello,

From what I remember this is specific to one GPIO (0?)

Have you tried the same on a different GPIO ?

-D

iron

martinus - normal user

Who would have thought

-D

iron

1. You do not realy need to monitor the mcp gpio in your application. 2. on gpio#0 do This condition is met twice given you have a push button so it will return. (once when gpio,0 goes high when you press it and then again when it goes low when you release it) You can catch the action only once by :...

iron

another question, is it possible withput a task for the pushbutton, use insede the rules the longpress action? //short press on SW1#state=0 do .... //long press on SW1#state=10 do .... That's were you need to start monitoring the MCP pins on boot on System#Boot do monitor,mcp,1 monitor,mpc,2 monito...

iron

Hello,

For output (mcpgpio,x,y) does not require to be set on any TASK you can just trigger it on demand.

For input you can set them on task but even that is not required if you monitor the pin on boot

monitor,mcp,#

-D

iron

Hello

RST : connect it to EPS gpio only if you have any reason to reset the MCP board. I never had the need.
ITA, ITB those are interrupt pins. You can safely ignore them.

A1 A2 A0 : are for the I2C address. No need to do anything if you only have 1 x MCP in the same I2C bus.

-D

iron

@TD-er

You might as well flip it around anyways

-D

iron

@TD-er

Go easy on Jimmy. His first day today

-D

iron

3 years ago I installed a DS18B20 temp sensor in my wife's florist shop main fridge. ESP Easy device publishes the data to thingspeak https://thingspeak.com/channels/177708 Then I enabled the thingspeak React (Apps/React) to tweet me in event temp is lower than x or higher than Y Every once in a whi...

iron

Using mcp23017 we get 16 GPIOs (A0-A7 / B0-B7). Under mcpgpio we can trigger pins 1 to 16 as expected. Monitoring the pins we can get the status of those pins as well. For some reason I can get the status of "mcpgio,0" { "log": "", "plugin": 9, "pin"...

iron

Unfortunately sendtohttp (thingspeak) does not work for me now no matter the "SendToHTTP wait for ack:" is enabled or not.
I tested with double quotes, either "Tolerant last parameter:" is enabled or not.

-D

iron

I confirm no issues updating a test device from the 20191208-17-PR_2820 to 20191208-19-PR_2825

-D

iron

I send the following message with Rules to MQTT, using the ESP (openHAB) MQTT controller to set the server, user and password. Do you mean you are using the OpenHAB MQTT Controller and Publish rules to speak to Thingspeak? I didn't know that was supported, so learned something new here. Be sure to ...

iron

I also added a new commit to allow the SendToHttp command to wait for an acknowledgement. For a new test build, see https://www.dropbox.com/s/azwe162gmxptlaz/ESPEasy_mega-20191208-17-PR_2820.zip?dl=0 See the commit: https://github.com/letscontrolit/ESPEasy/pull/2820 I just tested 20191208-17-PR_282...

iron

Is there a " in the string? You can also try one of the other 2 quotes. You can use the ` ' or " Oh and by the way, it can also be a problem with sendtohttp in combination with thingspeak. There are no quotes in the initial string. I tried quoting both single and double quotes, still no g...

iron

This works fine on a 20190805 unit SendToHTTP,api.thingspeak.com,80,/update?api_key=<mykey>&field1=[Thermometer#Temperature]&field2=[Thermometer#Humidity] When I upgrade the same unit to 20191208 the same does not work. 1. Enabled /disabled the the parsing tolerance option : does not work al...

iron

I'm trying to get an ESP to check an external server for a value but I don't know how (or if) I can receive responses? ...snip... Obviously I don't want to expose the ESP to the internet directly but if the request comes from the ESP then is safer. Hello, If the server is "external" how w...

iron

grovkillen wrote: ↑23 Oct 2019, 12:51 Upload latest version instead.

FYI last version : Release mega-20191016 does not include binaries (again)

-D

iron

Sounds exciting you guys !!!

-D

iron

Seems like the "Download new UI" button has been removed in the last release ? or has it been moved elsewhere ?

-D

iron

If you want to make sure all boot state pins are correctly set, you can also use the ESP-12S. These have the pull-up (ESP-EN, GPIO-0, GPIO-2) and pull-down (GPIO-15) set. What does bother me is that these boards apparently have 2 resistors for pull-up/down, so I would expect GPIO-0 and -2 are not s...

iron

If you want to make sure all boot state pins are correctly set, you can also use the ESP-12S. These have the pull-up (ESP-EN, GPIO-0, GPIO-2) and pull-down (GPIO-15) set. What does bother me is that these boards apparently have 2 resistors for pull-up/down, so I would expect GPIO-0 and -2 are not s...

iron

mine works...

https://thingspeak.com/channels/33034

Code: Select all

On Thermometer#Temperature do
SendToHTTP,api.thingspeak.com,80,/update?api_key={myAPIkey]&field1=[Thermometer#Temperature]&field2=[Thermometer#Humidity]
endon

-D

iron

Hello,

Something similar to this will work the best :

https://nodemcu-build.com/

User can choose their components and system will provide the image.

-D

iron

This is my exact (api key changed) working syntax for posting temp and humidity values to thingspeak On Thermometer#Temperature do SendToHTTP,api.thingspeak.com,80,/update?api_key=XXXXXXXXXXXXXXXXXXXX&field1=[Thermometer#Temperature]&field2=[Thermometer#Humidity] endon https://thingspeak.com...

iron

I wonder if it is just as simple as soldering on the chip...

iron

Tasmota guy, arendst , posted the following : "...As the ESP8285 uses DOUT SPI flash comms, GPIO9 (pin 18 = pin 7 of U6) and GPIO10 (pin 19 = pin 3 on U6) are available for user connections. No other SPI signals can be used as they are connected to the internal flash...." Meaning the U6 ca...

iron

SendToHTTP,url.com,80,/xyz is the syntax

you have space instead of coma after SendToHTTP

-D

iron

Also need to filter out off values. e.g ds18b20 often gets either a max (120?) or min (-60?) *C. Might want to filter those out as they will bump your 10 point avrg significantly

-D

iron

It is still strange that the bin file listed as 1M, does not fit into a 1M memory... :oops: If you do it Over The Air the target device has to has enough room to operate from the existing 1M file and store the new 1M file, so physically impossible. If you do it over serial then you simply over-writ...

iron

riker1 wrote: ↑05 Feb 2019, 17:49 Hi
I tried to erase all setting because I had a constant wifi problem with the robotDyn d1r2

even after flashing bare 4 mb minimum wifi config is retained.

but how?

how to delete everything?

Thanks T

Tools / Factory Reset

OR

http://<ip>/factoryreset

-D

Search found 221 matches