Let's Control It

papperone

great job! woudl you mind to share the code/plugin you used??

papperone

Yes, i see the GPIO's are not conencted to the relais. How is it possible to send serial commands out from the ESP? I think it should be possilble to control the relais over the F330. We have to send the hex value: 0x00 both off 0x01 relay one on 0x02 relay two on 0x03 both relays on ..but how? htt...

papperone

As far as I know the 2 relays are not controlled by GPIOs but via a kind of serial commands, so I am not sure it will be that easy to use both with ESPEasy

papperone

Hi ! PiZero bought at 0.99$ WOW :shock: Do you have a link for that ? Dominik That was available a while ago only in the physical store and limited to one per customer. I was by chance in USA for a business trip so every day I was goign to the Microstore shop to buy one, I ended up with four of the...

papperone

That's brilliant idea!!
I've still some PiZero bought at 0.99$ from Microcenter somewhere and now I believe I've foudn how to use them for more fun!

papperone

Sorry I misunderstood and coudl not open the previous link so I assumed it showed a sample of animation... my apologize! About your request, there's no way to obtain it with plain ESPEasy but you shoudl then write your own plugin; you can take a very good example of the "candle" plugin whi...

papperone

Looks nice but 50$ including shipping is too expensive IMHO... First of all I want to Thank you for your feedback! "Too expensive" comparing to what? Cheap China Boards available on Ebay and sold under the "sell-and-forget-about" strategy? It's a Apples vs. Oranges comparation. ...

papperone

the animaton link does not work, it reports "page nto found"; can you provide a working link in order to check?

papperone

Looks nice but 50$ including shipping is too expensive IMHO...

papperone

considering those are china-manufactured, are really expensive...

look at this thread for cheaper alternatives for same quality viewtopic.php?f=5&t=2317

papperone

Just saw new device from ITEAD based on ESP8266 core --> https://www.itead.cc/sonoff-sc.html looks like it's an environment monitor capable to monitor at same time: - temperature - humidity - air quality (dust sensor) - ambient noise (via a mic) - light level for just 20$ and with a nice looking enc...

papperone

- Stable webgui/ICMP ping: YES / no packet loss - ESP Hardware: Wemos D1 Mini (around 20 of them) - Firmware used: 140/146 - Stock binary image or custom: Custom compiled (I use "MQTT Import" plugin) - Controller type/version: OpenHAB MQTT - Raspberry running Mosquitto/NodeRed latest versi...

papperone

timsson wrote:https://www.itead.cc/wiki/Sonoff_Dual
How can i togggle/switch the 2 relay?
Thanks

As far as i understood you cannot from ESPeasy

papperone

Hello, I am using an LCD display with an I2C converter together with ESP Easy. Everything is working fine. But now I want to ad a proximity sensor which turns on the display when somebody is in front of the display. Is it possible to switch of the backlight of the display? Gr. Remco Sure, you need ...

papperone

GPIO 0 is for flash ( on the board DIO0) GPIO 1 is TXD0 GPIO 3 is RXD0 I dont find GPIO 2? the fact GPIO0 is for flash does not mean you cannot use it :) Same for GPIO1/3, as far as you don't need serial connection. and GPIO2 is right below GPIO0 http://www.sunrom.com/media/content/783/esp8266-pino...

papperone

was already mentioned here (even with same picture apparently!

) --> viewtopic.php?f=5&t=626&p=11000&hilit=arilux#p11000

papperone

Hello, Seems, this is a bug report for release 140. If I am posting to wrong topic, please, point me to correct one. The ESP module with release 140 runs MQTT publishing of HTU21, BMP180, and light sensors. It works fine (missing some reports, not a concern here). After 2-3 hours of work it is impo...

papperone

Hi, I don't have experience with the deep sleep mode on the ESP, so my question, can I build a wireless battery powered door ringer by putting the device in deep sleep? Activating it by the door ringer (push button?). I guess door ringer connected to RST? when booting up, send whatever signal and g...

papperone

according to the explanation on the item description GPIO0/1/2/3 shoudl be available

papperone

maybe read the SCT031 with the ADS1115 supported by ESPEasy? SCT013 can be used with ESP8266 with proper voltage divider, you can add ADS1115 if you need to read multiple analog sensors. This is one of the project I'm working with but as not enough time I'm not advancing at right speed... :( Nice t...

papperone

DeNB3rt wrote:maybe read the SCT031 with the ADS1115 supported by ESPEasy?

SCT013 can be used with ESP8266 with proper voltage divider, you can add ADS1115 if you need to read multiple analog sensors.
This is one of the project I'm working with but as not enough time I'm not advancing at right speed...

papperone

what is the sensor reading delay value? did you try to make reading every 10min, 15min, 20mins to check if the behavior change?

papperone

Just found out 2 very cheap units that looks perfect candidates for ESPEasy: 4 relays 10$ --> https://www.aliexpress.com/item/LinkNode-R4-Arduino-compatible-WiFi-relay-controller/32704022155.html 8 relays 15$ --> https://www.aliexpress.com/item/LinkNode-R8-Arduino-compatible-WiFi-relay-controller/32...

papperone

Use dummy device. Send to domoticz directly from Ina219 task, add rule to combine 3 tasks into one dummy and you will have device with 3 values. You are right, but I wanted to see all 3 values if I use ESPEasy as standalone device! My solution gives you task (dummy device) with all 3 values as you ...

papperone

It's a bit off-topic, but it's VCC measurement related question... I got today my INA219 and I hooked up to my ESP-01 with all other i2c sensors, but... I tough that the INA219 will show me all three measurement values like Current and Power too in the "Devices" page. https://s10.postimg....

papperone

Hello, Seems, this is a bug report for release 140. If I am posting to wrong topic, please, point me to correct one. The ESP module with release 140 runs MQTT publishing of HTU21, BMP180, and light sensors. It works fine (missing some reports, not a concern here). After 2-3 hours of work it is impo...

papperone

Anyway the MDPMV4 shoudl work with ESP8266 without any issue as the zero crossing detection has been implemented in its hardware. As far as I can read the microcontroller needs to send only a control signal to control the duty cycle and not bother anymore with ZC and interrupts... I did not test an...

papperone

Anyway the MDPMV4 shoudl work with ESP8266 without any issue as the zero crossing detection has been implemented in its hardware. As far as I can read the microcontroller needs to send only a control signal to control the duty cycle and not bother anymore with ZC and interrupts... I did not test any...

papperone

I could agree but when you have 5 sensors, same model, all reporting different readings with 5° difference or 20% diff in case of humidity i do care about accuracy!
I do not feel confortable to run multizone heating system with each zone differen readings and behavior!

papperone

I read about it as well but it's way too expensive... aroudn 25$ for a single module!! Probably a matter of time. Once our Chinese friends ramp up their machines and start producing this unit, I'm sure the price will drop quickly... yes price will drop but quality and accuracy as well :( today BMP2...

papperone

I read about it as well but it's way too expensive... aroudn 25$ for a single module!!

papperone

my comments: 1) schematich is fine (just the OUT1/2-N and OUT1/2-L are swapped I believe) 2) I indeed would replace R3/4 with 1k (I did the same with similar board I build but I've used 2N2222 and I'm not familiar with BC337) 3) as I use a 5VDC power supply to be able to use most common 5V relays, i...

papperone

The H801 seems to be getting discontinued - not easy to find at the moment. Has anybody got any luck looking inside any of the other Wifi enabled LED controllers yet? Like these: https://www.aliexpress.com/item/Free-shipping-Wifi-LED-RGB-Controller-DC12-24V-for-Android-and-IOS-system-intelligent-sm...

papperone

I'm goign to order a Nextion to experiment and probaly wall mounting it as GUI for my home automation. I'm just puzzled which size to order, 3.5" and 4.2" seems ok size-wise but really expensive, specially if you go to enhanced version. Which one you owns/use (size and normal or enhance) a...

papperone

Looks like you are putting here features everyone woudl love to see in the stardard ESPEasy fro EP8266

papperone

I realized that the problem does not exist on pin 2 (D4). ESPEasy detects all sensors and reads perfectly well all data if the 1-wire sensors are attached to pin2. At other pins the sensors do not get detected or always read zero. What is so special about GPIO-2 (D4) on the Wemos D1 mini? Can you p...

papperone

I must say I don't use it my self I use a modified version of quindor's lau code to contoll my aquarium lights they fade very nicely and are super stable can you share some info? maybe woudl be great to leverage the algorithm used for fading if very nice and create a RGBW plugin which is more "...

papperone

You are very stubborn. First read the wiki (http://www.letscontrolit.com/wiki/index.php/Tutorial_Rules) and then search this forum. You can't send a message to yourself. I had not looked at that as I could not imagine you would try that. Edit: As far as I know the UDP protocol does not even allow t...

papperone

Did you do a reboot ? Nescessary to make the nodelist and UDP work. Yes of course, I rebooted right after setup (2) so to make sure the node list and setup are refreshed ... Actually, I am wondering whether sending a ' command ' via the ' tools ' menu ***ONLY*** works on other EPSs in the node list...

papperone

Looks interesting experiment!
I should have one or two of those 2560 with ETH shield if you need some help testing am available

papperone

thanks jgrad, I was thinking to verify if those functionality can be implemented as plugins, but the time I've avail this period is very limited....

papperone

Hi, I'm experienceing some "strange" behavior but could be it's normal and I've never realized until today... After ESPEasy boot the "On System#Boot do" is executed almost immediately after WiFi and Controller connection which is fine. The strange thing is that after the above ru...

papperone

Just got this article http://www.esp32.com/viewtopic.php?t=339 which I understood ESP3212 moduel has been cancelled (?) and new one named ESP32S is just come out. I've checked eBay who seems to be the only site I can find the new chip on sale for 7.99$ http://www.ebay.com/itm/ESP-32S-WiFi-Bluetooth-...

papperone

Hi, I would like to raise these requests as I believe many of us will find them beneficial. GLOBAL COMMANDS I found few situation where I need to send same commands to all my ESPEasy nodes, and it's annoying to connect to each of them and as well time wasting. Woudl be great to create a way (maybe v...

papperone

Yes, in config tab is called "unit nr.".
By default all units are labelled as '0', try to set this value different for each node.

papperone

Did you assign different device number to each node?

papperone

I uploaded my basic test plugin for neopixel in the playground: https://github.com/ESP8266nu/ESPEasyPluginPlayground/blob/master/_P122_NeoPixel.ino Use rules commands to control single WS2812 leds into any color: neoPixel <led nr>,<red>,<green>,<blue> Who can change the code to use it with mqtt? it...

papperone

To be on the safe side I'll suggest to use a voltage divider. As well please note there are different ACS712 chip with different max values (5A, 20A and 30A if I remember correctly) but if you want just to know the status on/off the measurement accuracy is not relevant. Another "simple" tr...

papperone

Check this setting in tools/advanced menu: Message Delay (ms): defaults to 1000 but can be lowered. This could be the delay that you're experiencing. Thanks Martinus, that was it! I admit I've never realize there was such parameter in the Advanced Tab. FYI bringing it to 0 did not work as the butto...

papperone

as mentioned elsewhere, the footer of web interface should be changed to reflect the new domain (replace www.esp8266.nu with www.letscontrolit.com)

Search found 497 matches