Let's Control It

the cosmic gate

Nee hoor, niet nodig. Ga in Domoticz naar de installatie/hardware, en kies de "create rflink devices" button achter RFlink. Geef vervolgens op: 20;02;Eurodomest;ID=03696b;SWITCH=00;CMD=ON; Domoticz maakt dan een schakelaar met bovenstaande gegevens aan. Deze vind je onder installingen/app...

the cosmic gate

Sorry for the late respons, but it seems the same problem. I am running stable for a few months now, using pir as an alarm sensor. I upgraded my powersupply to 1 amp type. I also notices when the pir is exposed to the sun, sudden changes in sunlight triggers the pir. I am not able to solve that, yo...

the cosmic gate

Door de verhuis zijn we de AB kwijt geraakt van mijn eurodomest (Action) stekker/pluggen.
Nu wil ik toch graag deze weer gaan inzetten, maar kan deze dus niet meer programeren en zo aan domoticz koppelen.
Is er een alternatieve manier om dit met RFlink voor elkaar te krijgen>

the cosmic gate

Okay, I ordered a few days ago this item: http://www.aliexpress.com/item/5-8GHZ-Microwave-Radar-Module-Smart-Sensoring-Switch-6-9M-Home-Control/32602485648.html I attached it to a test esp module, i must say, it works great. Have it running for two days now, no false positives, it's mounted inside ...

the cosmic gate

Just did one other mod on the pir side, soldered on the pin Instead of the voltage divider.
But there's still the same issue every 3 seconds on/off.
Also replacedo the pir, but nothing

More/ other solutions?

the cosmic gate

are there people with the same problem and even beter a solution for this problem

the cosmic gate

Dylantje wrote:Perhaps this is the problem:
ScreenShot020.jpg

Uhhhm why ? These are maximum currents, but how to use these as a on/off switch using the 5v current from the esp (sonoff) ?

the cosmic gate

How did you wiring to the esp? Building this on a prototype board. And experimented with : connecting + voltage on the floater and the singal cable to the sonoff so when the floater is "on" there 5v + to the signal , also tried the same with the GND, connected some LED to see if there &qu...

the cosmic gate

the cosmic gate wrote:Anybody with a working solution ?

Nobody a working solution? Pull down resistor? One other solutions please?
(Getting sick of the lamp which switches on etc when not needed)

the cosmic gate

Trying to build a ATO using some floating sensors : http://g03.a.alicdn.com/kf/HTB17K3UIFXXXXX_XXXXq6xXFXXXo/5-3cm-long-font-b-Aquarium-b-font-Tank-Pool-Liquid-Water-Level-Sensor-Right-Angle.jpg I already tried to connect this some different ways but what's the way to connect these ? The ways in con...

the cosmic gate

I want to have more GPIO'S on the sonoff, so I flashed a pro mini with the extender ino, changed the GPIO to 1 & 3 after I disabled the serial port.
But how to test this if it's working or not? The log doesn't display anything (yet)

the cosmic gate

Anybody with a working solution ?

the cosmic gate

manjh wrote:Did you try to experiment with the pullup tickbox?

Yep i did:

the cosmic gate

Even more strange : when I completely disconnect this PIR thereally still some detected motion .......
Looks like interference or something

the cosmic gate

Yep same issues I had/have. I wrapped the pir wires in foil then grounded the foil and that worked pretty much so then I tried using coax to connect the pir and that also worked. I just changed the singal cable to a piece of coax, but still it detects motion while there absolutely no motion. http:/...

the cosmic gate

Yep same issues I had/have. I wrapped the pir wires in foil then grounded the foil and that worked pretty much so then I tried using coax to connect the pir and that also worked. Could you send me some pictures ? You only wrapped the PCB i think :) ? And did you use COAX as connector cable instead ...

the cosmic gate

I've got also issues : http://www.esp8266.nu/forum/viewtopic.php?f=5&t=1628 , are these the same as discribed in this topic ?

the cosmic gate

Anybody who can help me :
Used a hc-sr501 (PIR) on a ESP (sonoff) :

, But this sensors detects movement, while i know for sure there's no movement

As you find out, its every x seconds .
Anybody who can help me

the cosmic gate

Interesting project !

the cosmic gate

Is there a way to setup something like master slave on espeasy ? I am going to connect some extra esp12e using the 3v power pins to get more GPIO's and connect a display Got some nice idea's for the salt water aquarium . Want to measure the temp , control some lights , use water level sensors , use...

the cosmic gate

Is there a way to setup something like master slave on espeasy ? I am going to connect some extra esp12e using the 3v power pins to get more GPIO's and connect a display Got some nice idea's for the salt water aquarium . Want to measure the temp , control some lights , use water level sensors , use ...

the cosmic gate

LED's ( :) ) Kick this topic , the LED lamp we wanted to dim : http://www.p4c.philips.com/cgi-bin/cpindex.pl?ctn=690494816&dct=QAC&faqview=1&refdisplay=LED_12&refnr=0083191&scy=GB&slg=ENG . In the specs i can read that it needed : Phase cutting as dimmer , is there a solution...

the cosmic gate

For the interesed people, the newest (107) compiled Bin file : http://s000.tinyupload.com/?file_id=04460778187797739379 I'm not sure if it works this way for everybody. For what ESP is the binfile compiled , what kind of memory. What memory split? I flashes this on the sonoff (we are talking about ...

the cosmic gate

wanted to connect this , but no resolution of solution for now.
Somebody who can give me a help ? How to use ESP Easy for this LED dimmer solution

the cosmic gate

For the interesed people, the newest (107) compiled Bin file : http://s000.tinyupload.com/?file_id=044 ... 7797739379

the cosmic gate

Nobody with the same idea?

the cosmic gate

I would like to build / change one of the livingroom lights. This LED light has 3 LED and a 42v power supply, i already bought and soldered a buck down convertor to "change" 42v to 3.3v to power an ESP12 . But how can i build and use ESPEasy to finish this ? Mysensors had a solution like h...

the cosmic gate

One other nice ESP gadget ; http://www.electrodragon.com/w/ESP_Rela ... and_Wiring

the cosmic gate

Hi everyone. The work here is excellent and I've had a few of these devices for a while on their dedicated app. Can someone point me to the binaries of the latest 101 version so I can use the rules features. I've tried to build them myself but keep getting compile errors. Thanks here you go http://...

the cosmic gate

Okay got i runing with a DHT-22 on GPIO pin 14, what / how to get more GPIO's free ?
So i can use GPIO 3 for example

the cosmic gate

Could somebody tell me what way the LED would flicker ? Getting this differnt way's : fast flickering / normal flickering / stable red There is no rule what color when flickers, depends how the manufacturer connects , if any, leds to the chip. Usually during upload/flashing one led (often a blue on...

the cosmic gate

Hi everyone. The work here is excellent and I've had a few of these devices for a while on their dedicated app. Can someone point me to the binaries of the latest 101 version so I can use the rules features. I've tried to build them myself but keep getting compile errors. Thanks here you go http://...

the cosmic gate

Exactly did this several times, using the flash Tool / IDE , but without any result You must get some messages when flashing with the IDE. No result would mean your USB is faulty. Try this tonight Could somebody tell me what way the LED would flicker ? Getting this differnt way's : fast flickering ...

the cosmic gate

I only have experience with the 4_pin sonoff, but from the documentation i cannot see any difference in the schematics of the 4_pin or 5_pin Sonoff module, (except for that one extra pin), so the procedure to flash it should be the same I think. Disconnect power connect your FTDI USB/Serial interfa...

the cosmic gate

SuperToma wrote:Hi guys !

@Cosmic Gate :
- I exactly have the same problem as you with this 5 pins module,
I tried with the Windows command line tool and with Linux python too but have the same result on each OS.
.

Hope somebody can help us

the cosmic gate

Hi guys ! Thank you for your reply ! First of all there is my photo of the sonoff with 5 pins :) But secondly : I can't fly my module with ESPEasy :( - I use esptool - I want to use this firmware : ESPEasy_R78_1024.bin I got this error : Connecting... Erasing flash... A fatal error occurred: Invali...

the cosmic gate

BertB wrote:@ the cosmic gate
Did you make the environment portable?

sure, did it just as discribed in the steps . Is there somebody who can share his portable installation incl. all the mysensors etc files ? (google drive)

the cosmic gate

There was a compile bug in the first upload on github. This is fixed now. I'm not 100% sure on how I did my Arduino setup for this experiment, but it should be something like this: 1) Download Arduino 1.6.5. zipfile and store everything in c:\tools\arduino1.6.5.MySensors 2) Make this a portable set...

the cosmic gate

Hello esp freaks, Helli i'm huub from the netherlands. I live in the city of roermond. Im building a home automation system. I designed my own pcb for light controll and temperature sensor, pir sensor and rgb ledstrip. I'm planning on automate the lightings in my home and eventually all devices pos...

the cosmic gate

Backbone wrote:Does that DHT22 sensor still works on MYSENSOR?

Paco

Yes 100%

the cosmic gate

but how did you config the motion sensor ??
Trying to build almost the same as you use, but cant find the HC-SR501 PIR option. Or did you config a normal switch ?

the cosmic gate

change today by using one of the brand new modemcu 's i recieved. Connected die DHT22 on the GPO-2 port , and again : "nan" . are there more people using this http://nl.aliexpress.com/item/DHT22-Digital-Temperature-and-Humidity-Sensor-AM2302-Module-PCB-with-Cable-for-Arduino-Free-Shipping-...

the cosmic gate

Is there anybody with the same issue ? Or somebody who can help me ? Just tested DHT-22 with R43 - it works fine - Jan Damnn there must be something wrong. You also used an ESP-01 ? And how its connected : with or without an 10k pull-up? Maybe the issue is that I use the DHT-22 board instead of the...

the cosmic gate

Is there anybody with the same issue ?
Or somebody who can help me ?

the cosmic gate

Backbone wrote:R39 is workig fine for DHT11 in all my sensors nodes.
You use DHT22 I assume you selected DHT22 from the drop down menu.

Paco

That's exactly what I did , but the results are: NaN

the cosmic gate

Did you put in the pull up resistor on the data pin? I'm not too familiar with the ESP-1, but I am going to assume that it should work the same like the ESP-12E I'm using. Did you also select the right GPIO? From what I can see from the web, you have either GPIO0 or GPIO2. Yes I tried it with the p...

the cosmic gate

I also read on this forum that for the ESP-01 firmware R39 is not okay , and R20 is the last one you need tot flash ? Is this also for this DHT-22 etc ? Soms extra information , this is the dht-22 module i use : http://www.ebay.com/itm/370853072056?rmvSB=true&ul_ref=http%253A%252F%252Frover.ebay...

the cosmic gate

I've done it just as discribed,but nothing:(

When i use this DHT-22 in my test mysensors , the sensor is working OK

the cosmic gate

Okay i've got the esp-01 running now. But the next problem ;) I connected the DHT-22 temp / hum sensor. But the value is : 0 When I connect the same sensor to the mysensors breadboard the value is 22degrees. I connect the DHT-22 to the esp-01 gpo02 port and used 3.3v and 5v power (also separate from...

the cosmic gate

Backbone wrote:copy from user rmtucker,

To erase eeprom and start over again clean.

https://www.dropbox.com/s/hpw14exd42v3g ... r.ino?dl=0

press 'e' to erase
press 's' to show contents

Paco

just flashed this, and reflashed the espeasy sketch.
but now the default SSID ESP_0 doesn't display anymore ?

Search found 102 matches