Let's Control It

rajbadri

Although this is an old thread - i guess some people might still be interested how to definately solfe the RF-induced false triggering problem. You simple need to solder a 220nF ceramic capacitor across pin12 und pin13 of the chip (BISS0001) so that the high-frequency interference coming from the E...

rajbadri

code please

rajbadri

hi
have you been able to get this chime to work reliably in RFlink ?

rajbadri

These Energenie switches are working perfectly in RFXtrx433 controller but can't get them working in RFLink

rajbadri

solved it by doing this

: pir%20delay%20off.jpg (18.18 KiB) Viewed 3786 times

rajbadri

hi i have bought this pir sensor http://www.aliexpress.com/item/Coding-EV1527-Wireless-PIR-Motion-Sensor-Detector-For-Wireless-GSM-PSTN-Auto-Dial-Home-Security-Alarm/32635210696.html?spm=2114.01010208.3.178.yNJxWv&ws_ab_test=searchweb201556_0,searchweb201602_2_10057_10056_10065_10055_10054_10059...

rajbadri

hi

does this work with RFLink

http://www.banggood.com/100m-Wireless-T ... 43318.html

Thanks

rajbadri

hi
i have these switches

https://energenie4u.co.uk/catalogue/pro ... 002-2PI-RT

is it possible to control them through RFlink

Thanks

rajbadri

hi does this doorbell work with RFlink

Byron SX-15iw

http://doorchimesuk.co.uk/catalog/produ ... ucts_id=48

Thanks

rajbadri

hi
can i use this HB100 Microwave Motion Sensor as a switch (like a pir sensor) in esp-easy

: im130619001_3.jpg (59.81 KiB) Viewed 6581 times

rajbadri

Thanks

rajbadri

is it possible to change the default port 80 in esp easy.

rajbadri

: voltage-divider.jpg (211.79 KiB) Viewed 34144 times

is this schematic ok ?

rajbadri

Thanks
works perfectly
one more question can we use system time in rules. please give example

Thanks again

rajbadri

rajbadri

hi
newbie here. been using esp-easy for some time now with Domoticz.
can some one guide me about the hardware needed to use RFLink

Thanks

rajbadri

hi
i am trying to set NTP time in my esp. But the time offset is not accepting 5.30 which india gmt time and rounding it to 5.
so i am getting the wrong system time.

please advice

Thanks

rajbadri

hi
been using globalsync between esp's on my local network. Is it possible to connect esp's on different networks connected through internet by globalsync.

Thanks

rajbadri

currently using espeasy --> Thingspeak ----> Pushingbox to get notifications on my smartphone.

rajbadri

Works with everything requiring 5 sec delay or more. But does not run with doorbell which requires 1 sec delay. also it still jacks the load to 100% @ 1 sec delay.

rajbadri

will try

thanks

rajbadri

i want to connect my doorbell esp to ifttt plugin. when i am keeping a delay of 5 seconds or more the notifications does not trigger. As the doorbell triggers the esp8266 for about a second or less. what delay should i keep in the settings ? when i am keeping the delay for less than 5 seconds the es...

rajbadri

yesterday what i first marked was my sonoff switches were behaving erratically. when i use to switch them on / off from domoticz the were responding erratically. As soon as i recompiled without the ifttt plugin they started working normally.

i will try again today with new esp's

rajbadri

yesterday i did a lot of testing with your plugin with a variety of esp8266 modules and found that the modules become quite unresponsive after i compile the image using IFTTT plugin. The ping times which are normally in single digits increase to 300-400. After i removed the plugin and recompiled the...

rajbadri

i am unable to make it work with this esp device controlling my door lock , doorbell and reed sensor

: Screen Shot 2016-04-08 at 11.16.19 PM.png (93.36 KiB) Viewed 32997 times

rajbadri

works perfectly with my sonoff switch and my pir motion sensor

: Screen Shot 2016-04-08 at 11.10.44 PM.png (76.64 KiB) Viewed 32998 times

rajbadri

how to get device identifier for device doorbell ?

: Screen Shot 2016-04-08 at 10.41.57 AM.png (82.65 KiB) Viewed 33026 times

rajbadri

hi
i want to run it directly without a controller

rajbadri

hi
i want to execute a php script on my web server when one gpio pin turns high

demo.com/pushover.php

can anyone please guide me

Thanks

rajbadri

Notifications for Pushbullet, Pushover or Ifttt directly without domoticz server.

rajbadri

Wifi IoT Relay Board Based on ESP8266

http://www.electrodragon.com/product/wi ... d-esp8266/

: ESP8266-Wifi-Relay-Board-07-350x350.jpg (21.38 KiB) Viewed 13248 times

rajbadri

hi
is it possible to send notifications to pushbullet, pushover or ifttt directly without domoticz server.

Thanks

rajbadri

i have wired a wemos mini d1 as below and have selected in hardware settings wifi status led = GPIO 0.
my problem is that the led stays on continuously even when the wifi is switched off.

: Untitled Sketch 2_bb.jpg (64.71 KiB) Viewed 18901 times

Thanks

rajbadri

Thanks

rajbadri

then is it possible to use the I2C bus

rajbadri

i have uploaded firmware ver 80 to this device and have been able to activate the relay and led. Now i want to attach a dht11 sensor how should i go about it, which gpio port should i use and where is it located.

Thanks

rajbadri

is it possible to get wifi signal strength in esp easy.

rajbadri

hi i am trying to use the sharp dust sensor GP2Y10 to send values to domoticz air quality. i am getting values in the range of 500-550 but air quality in domoticz continuously shows 0. Do i have to give a formula in esp-easy so that values get reflected in Air-Quality. Screen Shot 2016-01-09 at 10.1...

rajbadri

esp easy pro-mini extender what value should be given in port

: Screen Shot 2016-01-09 at 8.30.26 AM.png (55.07 KiB) Viewed 3578 times

rajbadri

: images.png (5.35 KiB) Viewed 8009 times

rajbadri

hi
i have flashed my esp8266 module with the latest version of esp-easy but now it is asking for a web login password and not accepting the default configesp password.
how can i reset the esp8266 module eprom

Thanks

rajbadri

it has started working i am getting

dry : 980
in water : 420

can you please give formula so that i can convert values to percentage (and create events in domoticz)

Thanks Again

rajbadri

i want to use a soil sensor module with esp easy but cannot get the ADC port working in 1. Electrodragon esp8266 module http://www.electrodragon.com/product/esp8266-smd-adapter-board/ 2. Sparkfun esp thing https://www.sparkfun.com/products/13231 but it works perfectly with this module http://www.ele...

rajbadri

rajbadri

please guide how to use Soil Temperature/Moisture Sensor Probe (SHT10) with esp-easy

http://www.electrodragon.com/product/so ... obe-sht10/

Thanks

rajbadri

hi
is it possible to use a photoresistor or light-dependent resistor (LDR) in esp easy
[img]

: ldr.jpg (1.67 KiB) Viewed 6991 times

[/img]

please guide

Thanks

Search found 56 matches