Hi,
Did you check the Wiki?

Did you try additional reset?

Hi Richard,
I have completed my setup with an RFID reader and get the RFID tags in the Domoticz Text device.
Now, I would like to add your sketch to my setup. Can you please tell me where to download it?

Together

Look okay to me.

What is the logic level GPIO 0 and 2?
Is the FTDI-TX also 3.3 volt?

Did you try addiditonal reset?

You do not need to define anything in the software. For the ESP-0,1 do not use a version above 20. Once active, select in the hardware tab, via web interface a port for the SDA and one for SDC. Connect the BMP accordingly. You can check the connectivity in the Tools tab, with the I2C scanner. After ...

Martinus wrote:

BertB wrote:I am interested in having a dust sensor myself.

So you can build an automatic vacuum cleaner robot ?

Yep

And for climate control.

Hi Ger,
Welcome to the forum.
I hope you can show us your projects here sometime in the future.
I am interested in having a dust sensor myself.

Martinus wrote:We are on R25 on github, support for non latching push button switches.

So am I

Now, I have two DS18B20 sensors on pin 12. Both are correctly recognized by the Easy, but I think somthing is wrong with reading the values, because both sensors give the same readings. This is almost impossible since one sensor is mounted directly on the breadboard and the other one via a cable of...

Now, I have two DS18B20 sensors on pin 12. Both are correctly recognized by the Easy, but I think somthing is wrong with reading the values, because both sensors give the same readings. This is almost impossible since one sensor is mounted directly on the breadboard and the other one via a cable of ...

Do the relays work with 3.3 volts?

Welcome Lars.
I hope you will have a lot of fun with ESPEasy and will share your experiences and projects with us.
Greatings,
Bert

Ziet er goed uit. Hoe kan je die CSS uploaden?
Ik zie trouwens dat de node list niet meer functioneert. Dat vond ik wel een handig tooltje om snel van node naar node te hoppen.

update:
Ik heb hem al. Gewoon even met Kladblok in een bestandje zetten dat esp.css heet en uploaden maar.

Werkt erg leuk.

Please also check if your relays have clamp diodes. They prevent output transistors being destroyed by flyback currents. If the relays do have such diodes, they also have a distinctive + and - pin. This is not always shown on the housing. To overcome the 5 volt versus 3.3 volt problem, you could use...

asm7100 wrote:Just made this quick.

Nice picture, but please keep in mind that the collector of a npn transistor needs a positive voltage with respect to the emitter to work.
Also keep in mind that some remotes scan their buttons.
What chip is being used in the remote?

With which release has R20 been compiled?

Interesting example.
What do you use to power this up?

Hi, I was born in a time computers still occupied large halls and miniaturisation was yet to come, but music was rocking. Yes, in the late fifties. Bert is my name and I love technology. Born and raised in Utrecht, I earned my degree in elektronics with a specialisation in telecommunications. During...

Mediacj wrote:I have uploaded release 12 and now it works again

Will try to put 15 on it and see if it keeps working.

edit: and yes release 15 works also after uploading it again(what I did before)

ESP moves in mysterious ways.

Hard to say what is wrong. I have had many struggles with the ESP. Sometimes I even had to go back to the AT mode and the very first versions of Easy in order to get it going again. The only thing I always change in the source are the SSID and the WPA key. This is to avoid AP mode. The rest I fill i...

Hello Mediacj, I do not understand your question very well. You say there is no Wifi connection, but I understand you can access the Web interface. This implies that you have a Wifi connection. Did you try to issue the command Settings in the serial interface? What is the outcome? Initially, ESP Eas...