Bumping this topic ;) , I want to measure/calculate AC power usage with my ESPEasy. I found out this article: http://www.homautomation.org/2013/09/17/current-monitoring-with-non-invasive-sensor-and-arduino/ It's using a Non-invasive AC Current Sensor (type SCT-013-000 like in this topic title). Bur...

Hi, I don't have experience with the deep sleep mode on the ESP, so my question, can I build a wireless battery powered door ringer by putting the device in deep sleep? Activating it by the door ringer (push button?). I guess door ringer connected to RST? when booting up, send whatever signal and g...

Hi, I don't have experience with the deep sleep mode on the ESP, so my question, can I build a wireless battery powered door ringer by putting the device in deep sleep? Activating it by the door ringer (push button?). I guess door ringer connected to RST? when booting up, send whatever signal and go...

maybe read the SCT031 with the ADS1115 supported by ESPEasy? SCT013 can be used with ESP8266 with proper voltage divider, you can add ADS1115 if you need to read multiple analog sensors. This is one of the project I'm working with but as not enough time I'm not advancing at right speed... :( Nice t...

maybe read the SCT031 with the ADS1115 supported by ESPEasy?

Bumping this topic ;) , I want to measure/calculate AC power usage with my ESPEasy. I found out this article: http://www.homautomation.org/2013/09/17/current-monitoring-with-non-invasive-sensor-and-arduino/ It's using a Non-invasive AC Current Sensor (type SCT-013-000 like in this topic title). Burd...

so no deepsleep issue for >1min boot? Want to try it for my weather station

I have made an ESP8266 AC dimmer with an Atmega328 for phase control. Next week I will post the schematic and code on my website http://www.van-gennip.com An ESP8266 runs on ESPEasy firmware and i have made a plugin that talks I2C to the Atmega328. It is similar to the pro mini extender, but my Atm...

Anyway the MDPMV4 shoudl work with ESP8266 without any issue as the zero crossing detection has been implemented in its hardware. As far as I can read the microcontroller needs to send only a control signal to control the duty cycle and not bother anymore with ZC and interrupts... I did not test an...

I see data on ur channel, so it is working
I did the same last week, will get domoticz up and running end of the week.

mine, we are not at home
https://thingspeak.com/channels/181849

Hi, I'm looking for the same.
Did you order that dimmer? Did some testings?

Thanks!

Hi Guy's Are there some of you familiar with AC dimmers and ESPeasy? I don't mean the low voltage DC led dimmer like H801, but the normal household AC voltage :) . I found a project around with phase detection mpdmw4 project, http://www.esp8266-projects.com/2016/04/mpdmv4-mains-dimmerswitch.html I w...

Hi interesting project!
Please post some more details .

Question, I visited your site, but can't find a lot about your AC dimmer project. Please share

Hi, will you do that with esp easy?

greetz from Bruges

great sir!

wow nice one
how 'stable' is it now?

@rtenklooster, did you test with the HB100 sensor?

nobody tips/tricks for the SR501 and it's false positives when used as switch in esp easy?
tyyyy

rtenklooster wrote:
Planning on mounting one in my wooden jar, so i can see "trhough" the wall if someone enters my back garden

Can you let us know when you tested this?
I'm also having pir issues

I just finished uploading the latest firmware. It compiles fine and I am able to upload. The only problem I see now is, it does not stores the device configuration. If the ESP loses power or reboots, the devices configuration is lost and have to reconfigure. This is what the memory status is. ESP F...

found out that the HC-SR501 is not that stable if used on 3.3V (I think it's restarting each 10sec).
Working well if VCC is getting 5V.