Let's Control It

bobbybeans

Gus Thanks for the wonderful detailed explanation that all makes sense now (i believe) so just one clarification, the two numbers you get are the end of it, are the averages of the pulse /blanks just to help shorten it? I have looked at both the spreadsheet and the new one created on page 8 and both...

bobbybeans

Hey thanks for both of the reply it gives good insight Kirk I am a bit confused as to why you say its different? by looking at both of them it looks to be the same general layout of parts with LEDs resistors and I THINK the same chip. I can't see the exact chip model from the pictures. The one on my...

bobbybeans

OMG that's amazing. this would be great. both these plugins I am trying to help my friend as he wants monitoring out in his woods he has for growing crops and taking wind and water, temps and the current point were stuck at is paying for 3 g to submit all the values which is expensive in the states....

bobbybeans

Hey guys I just bought a i2c moisture sensor off ebay. Mine is actually the 2.4v of the one on tindie. It is the chirp version that you just put a battery in. However it still has the i2c header on it. as its cheaper and if I am buying lots of them it adds up A few questions about it I see the defau...

bobbybeans

nice I love this project, haha I don't really have a use for it, now but this is an awesome plugin. I know I could use this in the future for offsite monitoring of devices

bobbybeans

Hello, if you run your stripes consuming 5..6 amperes it's no matter if you use 20N06L or LR024N. Both will run and both will blow when you short circuit an output. There is another reason why i wouldn't change to 20N06L, see down. Maybe a fuse in the cable to the outputs might be a better idea? ;)...

bobbybeans

Hey guys, I am wondering if you guys had this issue. I have one of my H801s hooked up around my door in my room. I have rgb 5050 5 meter, warm white 4 meter and 5 meter for cool white attached to it. last night i had them on like I normally do (only the CW ones) and it flickered then went out. after...

bobbybeans

bobbybeans

perfect ty i am dling it now. very much appreciated

bobbybeans

honestly unless its something critical that you custom made in that, i would just reflash it and reinput the settings in but thats just what I would do. sorry i know not much help

bobbybeans

yes that would be amazing if you could just put it on some webhosting site and i can dl it
Thanks so much

bobbybeans

Try this URL: http://x.x.x.x/control?cmd=IRSEND,RAW,7VJVPO1VSVUE0E0E0E0E0E0FV,38,170,150 7VJVPO1VSVUE0E0E0E0E0E0FV es de Base32 if this sequence: 111111111001111111110011100000001111111110011111111100111000000011100000001110000000111000000011100000001110000000111111111 having 170 and 150 as pulse a...

bobbybeans

sorry very late reply on this i am just usually so busy with the job. I was thinking of partially coding it with selinium and a chrome web driver. That would generate the script to do most of what I would then I would have to just have it reference maybe a txt with a list of ips that feed into it an...

bobbybeans

Well I got the ir plugin working. I just gave up on compiling and downloaded the easy esp mega 2.0.0 dev8 branch bin file and flashed.... now I am a big confused I was using the excel doc provided back a page and i am not getting anything to work main because it looks like my IR code is a lot shorte...

bobbybeans

nevermind. i just gave up and went with the binary releases that are on the github

bobbybeans

Hey guys I spent all last night trying to compile and flash to firmware. I've done this a ton of times before but I don't know what's wrong. So a little background. I usually use precompiled bin found on here as they are easy and cover 99% of my needs. When I had to compile it for myself I would use...

bobbybeans

yeah I thought that was weird too. I removed the plugin and it compiled fine
I put back my original ir library as well

I will try again tonight starting from scratch. I copied the raw code from github into notepad then saved it
could have been tired not sure

I will also follow thi guide

bobbybeans

Hey there wow ! lots of work has been done since a few months ago i love it!. I already use this plugin for some IR LED RGB candles. have them working great. However I just bought a Future 40watt air purifier and decoded the signals exactly the same way i did in my original post for the candles http...

bobbybeans

anybody? version verification? i haven't started the project been to busy

bobbybeans

I know this is not a normal request but i figured id ask it anyway as were a bunch of hardware and software hackers essentially. Does anybody happen to have a 1to1 scale model of the sonoff sc20 wall plug? Reason i ask it I wanted to create a top cover for it to house a bh1750, a micro pir and a dh2...

bobbybeans

so question. I have so many devices that run on espeasy and its a pain when a new release comes out I have to manually go onto each device and select firmware and update it. very annoying but I appreciate the creators to do OTA updates as that's far better than flash upgrading. However I would like ...

bobbybeans

perfect thank you very much I appreciate it

bobbybeans

I think this might be more suited for the general discussion. However I also would like to know

bobbybeans

any ideas? or even ideas on how to figure out how to read the src to figure out which commands are needed ?

bobbybeans

thanks I will check this all out today

bobbybeans

Thanks for that info! I didn't even know that was even possible to remap the tx,rx. Cool! What happens if I have to reflash it /the webpage is not responding? would be disabling serial effectively just turn it into a paperweight if that happened? Looking this up I can find the disable serial in the ...

bobbybeans

yeah no worries
I have 5 of these thing but only 1 being used and they haven't failed me yet. I have just ran out of things to automate easily ... the ones that are not easy to automate take a more custom solution

bobbybeans

Hey guys I found this project before chirstmas and I have it all setup with my 2 particle photons that I had laying around doing nothing https://github.com/Here-Be-Dragons/familamp https://www.youtube.com/watch?v=uUX5NEsEXrw got it functioning great with those they use the publish and subscribe of s...

bobbybeans

hey guys I received 2 sonoff s20's in the mail. I flashed them with espeay r148 and set it all up for working I have 2 questions 1) does this support i2c? I know the firmware does and the chip but does anybody know where to hook it up? or am I going to have to look at the pitout diagram and jankily ...

bobbybeans

id probably vote for reflashing it? what version did you compile? or did you just grab a bin from somewhere? if you compiled the latest version then that may be it is it might have bugs causing it to restart. I have version 148 beta 1 (I believe) and its fine, id say first flash it with esp easy r12...

bobbybeans

what i did was change it to selector, save it. flipped it on and off again a few times, then saved it as a dimmer again, still nothing.
Should I just resetup the entire switch? (id preferably not like to do that as I have quite a few of them) but i can if needed.

bobbybeans

hey man I just tried this script it works great, sorta.... when i turn it off, it updates and turns off (PWM 0), when i turn it on it turns on at full brightness. (PWM 1023) But when I move the slider it updates as well but even at 100% it only ever sets a maximum PWM of 156. is the math wrong somew...

bobbybeans

ok thanks guys i will look into this

bobbybeans

I have got it working the touch sensor is on pin 0 I traced it back on the board as I couldn't find any diagrams of it . shall be doing a write up when I have time as the other thread seems to be a us version of the switch as I can't solder on headers without it interfering with the case when I put ...

bobbybeans

i have found the led on pin 13 and the relay on pin 12. what pin is the capacitive touch on? . as currently i have it setup so i can control it from domoticz and tablet via the switch and it flips the relay...but i can't touch the actual capacitive touch

bobbybeans

well... i got it working with 64k spiffs and directly compiling and uploading it. before that i reflashed it i dont know how many times with my bins, and the one you provided. Thanks though

i just monitored the serial and saw it finish. now to figure out the relay pin ....

bobbybeans

i was mainly wondering about the spiff size? You may use the Arduino ESP and compile a .bin File for the 8255-chip. In general it is an ESP8266 with internal 1024 kbyte memory so set the compiling parameters accordingly (Board type ESP-8255, memsize etc). i found this one however the pinout /layout ...

bobbybeans

So, i just recieved a sonoff touch in the mail, first thing i did was rip it apart and immediately noticed it has a really small esp chip the psf-a01 after some googling I found the pinout for pin 0 , 3.3 , gnd, tx and rx. and figured out this is a esp8285 greattt.... i don't have any bins for this ...

bobbybeans

Hello, I received the device today. The flash was success full with ESPEasy, without problems. BUT it don't know which two GPIO's are used for the relais. Any ideas? Please help :-) For flashing I used this picture. Pin: VCC (3.3V), RX, TX, GND Sonoff_Dual_Hardware.png and set this ESP PIN GPIO00 t...

bobbybeans

Why not use an old smartpone for internet connection? For the small amount of data to transmit 2G is more than sufficient amd consumes less power than 3G. With a sufficient solar panel it shouldn't be a problem to run phone and esp 24/7. Chose switching regulators for best efficiency of power conve...

bobbybeans

lol crap, well i fell for that... i just got them in the mail. I totally did not even see that. I will be complaining , good strategy on marketing though

bobbybeans

bueller, bueller, anybody? bueller

bobbybeans

ive never configured them via an ftdi so i can't speak for that. how about you narrow it down a little by reflashing one of them. then configure one in steps. for example reflash configure wifi so it connects and you can ping it reboot wait a few min does it do it? configure mqtt reboot wait a min c...

bobbybeans

Although this is an old thread - i guess some people might still be interested how to definately solfe the RF-induced false triggering problem. You simple need to solder a 220nF ceramic capacitor across pin12 und pin13 of the chip (BISS0001) so that the high-frequency interference coming from the E...

bobbybeans

nice I was contemplating buying these but decided agaisnt it as I didn't want to do hex editing and I can easily flash others that work. I look forward to this and might buy them in the future

bobbybeans

Thank you, much appreciated. Currently I have only RGB led strip, but I will order RGBW. Script is clear, even for me 😊. Do you know If there is any way how to achieve white colour on RGB led strip? nope you can't if your referencing the rgb 5050 led strips they literally don't have a white channel...

bobbybeans

So last night I updated all my modules except a few to r147 from r120. It went smoothly no hiccups at all However, there were 3 modules I didn't update as I have a question about it. I was trying to figure out how the update function actually worked. I add the new bin it accepts it then flashes the ...

bobbybeans

lol touche
didn't even think of that as I was writing that however in the past I thought of that
but from what I read the https would increase the load on the tiny esp? right? as it has to decode /encode the certs

bobbybeans

most likely the cable is too long you would have to much voltage drop to do anything 2 things you could try just for diagnosing if you have a multimeter measure the voltage at the source then again at the destination. the difference is the voltage drop. if you have crappy cable the resistance is hig...

bobbybeans

#1 - Please obfuscate ALL passwords on the config tab - not only the WiFiKey, but also the admin password and the "WPA AP mode key" #2 - Make it possible to change the admin password from the console command line. #3 - CONTINUE MAKING THE MOST INTERESTING CONFIG INTERFACES FOR THE ESP8266...

Search found 119 matches