Het werkt ongeveer zo:
1) Het signaal wordt door RFLink herkend en gedecodeerd.
2) Nu kan RFLink een code uitzenden d.m.v. de naam van het herkende protocol gecombineerd met een ID en een aktie
Als stap 1 nog niet is gedaan kun je stap 2 dus niet maken.
Search found 500 matches
- 31 Aug 2016, 13:40
- Forum: RFLink: Nederlands support forum
- Topic: 433 signaal verzenden
- Replies: 18
- Views: 11954
- 31 Aug 2016, 11:07
- Forum: RFLink: Unsupported devices
- Topic: Solved: Digoo RC-13 Smart RF Cotroller - Now Working Using RFFind
- Replies: 21
- Views: 19398
Re: Digoo RC-13 Smart RF Cotroller
My guess this chip is the EV1527 encoder. It has a 20 bit unique ID, the first 20 bits and the last 4 bits encode 4 keys or 16 possibe codes.
- 31 Aug 2016, 10:50
- Forum: ESP Easy: Hardware
- Topic: Support for ESP32 - the story so far
- Replies: 29
- Views: 38022
Re: Support for ESP32 planned?
I think it is not on the developer(s) of ESPEasy to make support for the ESP32.
ESP's working in the Arduino IDE are the work of 'Igrr' found at https://github.com/esp8266/Arduino
ESP's working in the Arduino IDE are the work of 'Igrr' found at https://github.com/esp8266/Arduino
- 31 Aug 2016, 10:33
- Forum: ESP Easy: General Discussion
- Topic: Some advise for compiling last releases?
- Replies: 27
- Views: 27005
Re: Some advise for compiling last releases?
For me it works with these libraries and IDE 1.6.5: ArduinoJson (version ArduinoJson-v5.6.4 https://github.com/bblanchon/ArduinoJson) IRremoteESP8266 (https://github.com/sebastienwarin/IRremoteESP8266) LiquidCrystal_I2C (https://github.com/marcoschwartz/LiquidCrystal_I2C) PubSubClient (https://githu...
- 23 Aug 2016, 13:02
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 173820
Re: OLED Scrolling Display
@ jsilver
Try to remove some plugins you do not use, so you have more free memory and your device will not crash.
Try to remove some plugins you do not use, so you have more free memory and your device will not crash.
- 21 Aug 2016, 00:40
- Forum: ESP Easy: General Discussion
- Topic: ESP8266 is 5V tolerant on GPIO!
- Replies: 4
- Views: 30009
Re: ESP8266 is 5V tolerant on GPIO!
the article say: Conclusion I believe the experiment result is conclusive. The ESP8266 I/O is 5V tolerant unless couple of uA current can destroy the chip. Except for completely wrong wiring, such as feed 5V into 3.3v rail or feed 5V into output pin (in output low state or in output high with push-p...
- 19 Aug 2016, 15:52
- Forum: RFlink: General Discussions
- Topic: Range extender
- Replies: 3
- Views: 4481
Re: Range extender
Hi, thanks for your reply. I could try another antenna, but does this also increase the sensitivity? The ground plane is already in place. Normally I would agree that relaying an RF signal is not easy, but in this case this could be solved with a repeater like this: http://www.klikaanklikuit.nl/sho...
- 18 Aug 2016, 11:16
- Forum: RFlink: General Discussions
- Topic: Range extender
- Replies: 3
- Views: 4481
Re: Range extender
Maybe you can try to use a better antenna or find a better place for the antenna? Also using a metal (ground)plate under the antenna can help to improve the efficiency of your antenna. Usually bigger antenna's give longer range (assuming it is constructed following the rules for proper antenna desig...
- 18 Aug 2016, 10:33
- Forum: ESP Easy: Software
- Topic: How to use %sysname% in Publish command?
- Replies: 12
- Views: 9249
Re: How to use %sysname% in Publish command?
Is not this for the TopicStarter himself to decide if his issue is solved ?tozett wrote:sounds like solved?
may the Threadstarter could mark his first post here as SOLVED...
thanks..
thank you.
- 18 Aug 2016, 10:24
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 693192
Re: New ESP gadget
For the people who want the esp8266 and relay and 230v built in the wall, this looks nice https://ex-store.de/ESP8266-WiFi-Relay-V31#&gid=1&pid=1 Should it be able to flash it with te OTA of that software with espeasy? Just try it, someone should be the first . If it fails you can always re...
- 18 Aug 2016, 10:02
- Forum: ESP Easy: General Discussion
- Topic: ProMiniExtender
- Replies: 27
- Views: 38187
Re: ProMiniExtender
Delays of a few microseconds should not be a problem, delays of many milliseconds are expected to give problems. I do not have the time to investigate this software and library TimerOne.h, You should try it yourself. You have to change the analogRead() part in the loop into a integer(s) that is/are ...
- 17 Aug 2016, 17:06
- Forum: ESP Easy: Projects / Applications
- Topic: Switch value not updating when operated from Domoticz
- Replies: 12
- Views: 18261
Re: Switch value not updating when operated from Domoticz
For the SonOff it is explained on the forum several times. In Domoticz: Switch type: On/Off On Action: http://[localIP]/control?cmd=event,switchon OffAction: http://[localIP]/control?cmd=event,switchoff In ESPEasy on localIP webinterface: Devices: Task - Device - Name - Port - IDX/Variable - GPIO - ...
- 17 Aug 2016, 16:52
- Forum: ESP Easy: General Discussion
- Topic: ProMiniExtender
- Replies: 27
- Views: 38187
Re: ProMiniExtender
@ happytm First make the PME work without any modifications. This mean you put the PME sketch into a Arduino module like Pro-Mini/Mini/Nano or whichever as long as it uses A4&A5 as I2C pins. After connecting the Arduino you check the I2C, if it does not work you may need to change A4 and A5. Als...
- 17 Aug 2016, 16:42
- Forum: ESP Easy: Software
- Topic: Enhanced OLED plugin
- Replies: 5
- Views: 7749
Re: Enhanced OLED plugin
Hi, how can i use this with R121 and the framedOled? Thanks I have no idea. You can ask the maker of the frameOLED plugin ? It modifications I made are meant to work on the original OLED plugin as is distributed in the ESPEasy package. I used it on R78 and a few later beta versions, I have not yet ...
- 12 Aug 2016, 02:07
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 290921
Re: ESP Easy Releases
I tried a sonoff-device, now I cannot reach it any more. It said, Update ok and then it dissapeared. SonOff devices usually have a 1 megaByte flash chip so if you make the binfile yourself you have to choose these values: Board: Generic ESP8266 Module FlashSize: 1M (64K SPIFFS) Reset Method: "...
- 08 Aug 2016, 12:36
- Forum: ESP Easy: Projects / Applications
- Topic: Switch linked to group/scene idx in Domoticz
- Replies: 4
- Views: 7237
Re: Switch linked to group/scene idx in Domoticz
Currently I have to use a lua script running on ESP8266 NodeMCU to link my physical switches to a group/scene IDX of Domoticz virtual switches. However I miss the web interface of ESP easy firmware. A Group/Scene Switch in Domoticz has some advantages: Why don´t you run LUA scripts in Domoticz. Cal...
- 07 Aug 2016, 22:53
- Forum: ESP Easy: Projects / Applications
- Topic: I2C communication
- Replies: 2
- Views: 59888
Re: I2C communication
Yes with the proMiniExtender plugin https://github.com/ESP8266nu/ESPEasySlaves
see also http://www.esp8266.nu/forum/viewtopic.php?f=4&t=627
see also http://www.esp8266.nu/forum/viewtopic.php?f=4&t=627
- 04 Aug 2016, 14:31
- Forum: RFlink: General Discussions
- Topic: RFlink without controller (MySensors bridge)
- Replies: 2
- Views: 4784
Re: RFlink without controller (MySensors bridge)
@ dakipro. Just an idea: Consider to run your My Sensor software on an arduino as a slave for ESPEasy. Just add two calls to your MySensor sketch: I2C read and i2Csent and it can work. The Pro-mini plugin makes it possible to transfer integer variables over the I2C protocol at a relatively low speed...
- 02 Aug 2016, 23:34
- Forum: ESP Easy: Software
- Topic: NTP not working
- Replies: 14
- Views: 15123
Re: NTP not working
Hello I try to work with 108 and 115 ver. but still my NTP qere didn't get time from NTP server. I think all my setings is corect IP: 192.168.20.100/GW"192.168.20.1/SM:255.255.255.0/DNS:212.59.1.1 NTP enabled. But system time is looks like start time... Also I tried different NTP Hostnames but...
- 31 Jul 2016, 12:56
- Forum: ESP Easy: General Discussion
- Topic: New ESP8266 based board available
- Replies: 7
- Views: 10357
Re: New ESP8266 based board available
Nice work. Some points I think to improve the manual/design: a) The input resistors R22-29 can only be smd, it would be very simple to provide 2 extra holes so that wired resistors, which are often more easy to acquire, can also be used as a choice. I specially think of 0.5W resistors. For the analo...
- 28 Jul 2016, 14:24
- Forum: ESP Easy: Software
- Topic: Cannot see the Webinterface
- Replies: 2
- Views: 2512
Re: Cannot see the Webinterface
Sometimes it helps to clear cache of your browser.
Or maybe the ESP got a new IPnumber from your router. Log in on your router to see the IP's on your network.
Or maybe the ESP got a new IPnumber from your router. Log in on your router to see the IP's on your network.
- 27 Jul 2016, 14:23
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19750
Re: Reboot Loop
i've had similar problems when I did an update from R78 to R108. Directly after flashing the new version I removed power, connected Rx and Tx together.Reconnected power and waited a few minutes so the ESP has time to clear the data memory. Then disconnected power and removed the Rx/Tx short, reconne...
- 27 Jul 2016, 13:19
- Forum: RFLink: Nederlands support forum
- Topic: Action (EuroDomest) / Impuls
- Replies: 8
- Views: 16339
Re: Action (EuroDomest) / Impuls
Het 'oude-KaKu' protocol ARC gebruiken.
- 25 Jul 2016, 17:51
- Forum: ESP Easy: Hardware
- Topic: HC-SR501 PIR issue's
- Replies: 31
- Views: 37771
Re: HC-SR501 PIR issue's
@ NietGiftig I believe you are mistaken a radarsensor for this type of sensor: http://www.aliexpress.com/item/DC-5V-MQ-9-Combustible-Gas-Detector-Carbon-Monoxide-CO-Sensor-Module-for-Arduino/32432273191.html?ws_ab_test=searchweb201556_7,searchweb201602_2_10057_10056_10055_10049_10017_405_404_10059_1...
- 09 Jul 2016, 02:31
- Forum: ESP Easy: Hardware
- Topic: GPIO-0 hardwired or pull up resistor?
- Replies: 1
- Views: 3818
Re: GPIO-0 hardwired or pull up resistor?
Hardwiring GPIO-0 to Vcc will destroy your ESP when you (accidentally) make GPIO-0 low, which is easy to do with a command like http://<ESP IP address>/control?cmd=GPIO,0,0 So ALWAYS use pullup/pulldown resistors of about 10k when you want to force a GPIO in a certain state. To answer the question: ...
- 09 Jul 2016, 02:25
- Forum: ESP Easy: General Discussion
- Topic: [FIXED] Thingspeak publish template example
- Replies: 14
- Views: 18686
Re: [FIXED] Thingspeak publish template example
Probably you have to tick the box 'Send Data' in the task settings of your device.
(But I do not use thingspeak so I'm just guessing)
(But I do not use thingspeak so I'm just guessing)
- 09 Jul 2016, 01:49
- Forum: ESP Easy: Projects / Applications
- Topic: homegarden
- Replies: 2
- Views: 3587
Re: homegarden
I think this is a little beyond the scope of this blog. We are all ESPEasy users and only a few here will write there own ESP8266 programs. Probably is it better to put your question on dedicated ESP8266 blogs like these: Het grote ESP8266 topic https://gathering.tweakers.net/forum/list_messages/162...
- 06 Jul 2016, 17:21
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90185
Re: Measure VCC
Nope.. ADC measures 0 to 1V, so building: GND --<===>--|--<===>-- 4.2V LiPo battery 220K | 1000K ADC gives me 1/4,54 ration, so max V measured at ADC is 0.924V :o That's not correct ;) The ratio is 220/(220+1000) = (1/5.55) = 0.18 so when measuring a 4.2V cel it will read 0.76 Volt. On the other ha...
- 06 Jul 2016, 15:49
- Forum: ESP Easy: Hardware
- Topic: Electrodragon AI-Thinker battery powered sensor board
- Replies: 7
- Views: 7003
Re: Electrodragon AI-Thinker battery powered sensor board
LDR will be connected somehow to the ADC-pin. Maybe by a jumper on a header or directly. Either measure it with a multimeter or look at the traces. I do not own this board so do your own investigations. There are enough articles about this board on the web. search like this: https://www.google.nl/se...
- 04 Jul 2016, 18:40
- Forum: ESP Easy: Hardware
- Topic: Electrodragon AI-Thinker battery powered sensor board
- Replies: 7
- Views: 7003
Re: Electrodragon AI-Thinker battery powered sensor board
You can monitor the battery. You have to use the ADC pin, be sure no other components (LDR?) are connected to the ADC pin. Then use a resistor divider: 100k between ADC-pin and ground and 330k from ADC-pin to the V+ of battery. Maybe with completely full battery the ADC measures full scale but when ...
- 03 Jul 2016, 18:29
- Forum: RFLink: Nederlands support forum
- Topic: wat ideetjes
- Replies: 5
- Views: 6297
Re: wat ideetjes
Commerciele bedrijven maken soms graag gebruik van opensource zonder zich aan de regels te houden. Nog erger zijn de super grote (edit: semi-monopolistische ) bedrijven die open source omarmen, er kleine veranderingen in aanbrengen en dan de sourcecode gesloten maken om er daarna copyright op te cl...
- 03 Jul 2016, 02:09
- Forum: ESP Easy: General Discussion
- Topic: Wemos D1mini + Oled Shield Display Issue
- Replies: 7
- Views: 6029
Re: Wemos D1mini + Oled Shield Display Issue
Did you give the DHT a name in tasksettings?
It should be DHT to let the string [DHT#Temperature] display the value temperature, and for humidity the same.
Probably also you need to activate the box 'Send Data" and give IDX/Var a number >1
It should be DHT to let the string [DHT#Temperature] display the value temperature, and for humidity the same.
Probably also you need to activate the box 'Send Data" and give IDX/Var a number >1
- 02 Jul 2016, 21:21
- Forum: RFLink: Nederlands support forum
- Topic: wat ideetjes
- Replies: 5
- Views: 6297
Re: wat ideetjes
protocol (aangezien nu ookal 686, 2.4 enz wordt ondersteunt) Ik neem aan dat je 868 bedoeld i.p.v. 686. 315Mhz 433Mhz 868 Mhz maakt in principe geen verschil, alleen een kwestie van een andere tranceiver (receiver+transmitter). Voor de rest ben ik het er mee eens. Source code zou welkom zijn maar i...
- 02 Jul 2016, 21:14
- Forum: ESP Easy: Hardware
- Topic: ESP8266 512kb and i2c
- Replies: 2
- Views: 3012
Re: ESP8266 512kb and i2c
@ alexshf:
Are you using an ESP-01 with 512kbit ?
Are you using an ESP-01 with 512kbit ?
- 02 Jul 2016, 02:32
- Forum: ESP Easy: General Discussion
- Topic: Wemos D1mini + Oled Shield Display Issue
- Replies: 7
- Views: 6029
- 02 Jul 2016, 02:29
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 290921
Re: ESP Easy Releases
May I please ask what the IDE version and ESP boards versions are to compile the latest source? I can compile R78 with 1.6.5 and ESP 2.0.0 but it fails using the latest (108) code. Thank you Just use ESP Core 2.1.0 and it will compile. Look at the first line in the source code, it says: #define ESP...
- 01 Jul 2016, 15:36
- Forum: ESP Easy: Software
- Topic: Solved: systime gives uptime
- Replies: 5
- Views: 5037
Re: Solved: systime gives uptime
Found the problem, it was in the config file of my own ESP easy where I had changed 2 values by accident. In the optional settings, where I define the fixed I.P. there was an error. For ESP subnet I had given my local DNS/Router I.P. and for ESP DNS I had given the subnet 255.255.255.0 Afterall it i...
- 01 Jul 2016, 14:54
- Forum: Introduce yourself
- Topic: Hong Kong
- Replies: 1
- Views: 3524
Re: Hong Kong
Welcome to the Domoticz - ESPEasy community.
- 01 Jul 2016, 14:53
- Forum: ESP Easy: Hardware
- Topic: Konke Smart MiniK socket
- Replies: 7
- Views: 17796
Re: Konke Smart MiniK socket
As I read the documentation, there is a 8Mbit flash chip onboard. This is 1 MByte which is good for ESPEasy including the flash-OTA. So in my opinion there is no need to replace the memory chip for easy working with ESPEasy. I think we are still waiting for a cheap small board to replace existing AC...
- 01 Jul 2016, 00:33
- Forum: ESP Easy: General Discussion
- Topic: Reboot router, ESPEasy doesn't reconnect?
- Replies: 14
- Views: 14543
Re: Reboot router, ESPEasy doesn't reconnect?
Later versions of both mqttpubsubient and also the ESP8266 library mean that on my system both the released build and the beta versions give compile errors. Later today I need to experiment with libraries to see what I can get to work. This could be tricky for those less knowledgable, so a released...
- 29 Jun 2016, 11:20
- Forum: ESP Easy: General Discussion
- Topic: Slow response after several commands
- Replies: 2
- Views: 3260
Re: Slow response after several commands
It is not a bug, it is normal behavior for a TCP-ip connection. Reliability is more important than speed.
- 28 Jun 2016, 19:24
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90185
Re: Measure VCC
I have tested this feature on a WeMos D1 mini and it is working as on every ESP8266 I have seen so far. WeMos has, just as the NodeMCU board, 2 resistors on the ADC/Tout pin, 100k to ground and 220k to the external ADC pin. This means the ADC is always loaded with 100k which is not allowed when meas...
- 28 Jun 2016, 19:17
- Forum: ESP Easy: Software
- Topic: Solved: systime gives uptime
- Replies: 5
- Views: 5037
Re: systime gives uptime
Thank you for your reply, good to know that for others it still works. For me it used to work with %systime% in the display but it stopped working. After a reboot It displays 0:00 and then counts the uptime. Because it works for you I may have an issue with the pihole addblocker or dns server. Proba...
- 28 Jun 2016, 13:57
- Forum: ESP Easy: Software
- Topic: Solved: systime gives uptime
- Replies: 5
- Views: 5037
Re: systime gives uptime
No answer yet.
Is there anyone who can read system time as GMT , from pool.ntp.org ?
If yes then maybe I have an issue in my network.
Is there anyone who can read system time as GMT , from pool.ntp.org ?
If yes then maybe I have an issue in my network.
- 27 Jun 2016, 23:46
- Forum: ESP Easy: Hardware
- Topic: MAX6675 K Type Thermocouple
- Replies: 3
- Views: 5613
Re: MAX6675 K Type Thermocouple
The MAX31855 is just like Max6675 SPI compatible. The only way I can think to connect SPI-bus with ESPEasy is via the Pro Mini Extender. The libraries for SPI, Max6675 and I2C must be on the Pro-Mini including a sketch. The value you want to send to the ESP needs to be global and integer. Then this ...
- 27 Jun 2016, 23:09
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 693192
Re: New ESP gadget
@ Monkey Town See the schematic here: http://wiki.iteadstudio.com/images/6/6b/Sonoff_schmatic.pdf the 5-pin header is in the right top of the schematic: 1 - Vcc 3.3V 2 - TX 3 - RX 4 - Gnd 5 - SCL = pin9 of ESP8266 which is GPIO14 So the first 4 are the same as on the 4-pin Sonoff , there is just an ...
- 27 Jun 2016, 19:43
- Forum: ESP Easy: General Discussion
- Topic: AP "ESP_0XXXXX" after flashing and no login page
- Replies: 5
- Views: 6030
Re: AP "ESP_0XXXXX" after flashing and no login page
great for you Roman.
I never succeeded in installing esptool
That is one reason I always use Arduino IDE.
I never succeeded in installing esptool
That is one reason I always use Arduino IDE.
- 27 Jun 2016, 19:04
- Forum: ESP Easy: General Discussion
- Topic: AP "ESP_0XXXXX" after flashing and no login page
- Replies: 5
- Views: 6030
Re: AP "ESP_0XXXXX" after flashing and no login page
Compiling without errors needs the right IDE and the right libraries. If you want to compile R78 you need to use an older version of the Arduino IDE, 1.6.5 and not 1.6.9 Also you need to install the ESP8266 Libraries v 2.0.0. When you want to compile newer beta versions of ESPEasy you need to instal...
- 27 Jun 2016, 00:51
- Forum: ESP Easy: Software
- Topic: Solved: systime gives uptime
- Replies: 5
- Views: 5037
Solved: systime gives uptime
I set in : Tools > advanced > the 'Use NTP' box and used 'pool.ntp.org' as NTP hostname but I do not get the GMT time on my display, instead it will show me the uptime in hours & minutes. I am sure it used to work this way some time ago but it stopped working for some reason. Do other users of N...
- 27 Jun 2016, 00:26
- Forum: ESP Easy: General Discussion
- Topic: AP "ESP_0XXXXX" after flashing and no login page
- Replies: 5
- Views: 6030
Re: AP "ESP_0XXXXX" after flashing and no login page
Now when I reboot the chip it starts a AP with the SSID "ESP_0XXXXX" where XXXXX are the last digits of the MAC Address. When the AP comes with the last digits of it's mac address that make me believe that you did not succeed in flashing the ESP's. These SSID's are generated by the AT-fir...