Let's Control It

toffel969

A warm welcome from Saarbrücken!

toffel969

It is not + version. Now I power it from USB port, so what is yours suggestions, how I must power it? you need to connect it to the gpio by using a 3,3/5v logiv level converter, all the info is there check the wiki https://www.letscontrolit.com/wiki/index.php/HC-SR04 https://www.letscontrolit.com/w...

toffel969

If it is not the "+" version, no surprise. The gpio being 5v tolerant or not, the US needs 5v logic level to drive the speaker to send out a ping

toffel969

Isn't there a way to store the values in an mqtt broker, not that I'm using it, I just remember having read about it on the forum...

toffel969

HEllo, Thank you for your reply, In my case it's not possible to modulate temperature there is only a dry contact input, your idea is interesting! I will try to implement it. I also have a lot of ideas but not sure how to implement, sorted by importance : 1 - I would like to schedule different temp...

toffel969

I have the same problem. It kills the servos rather quickly... a fix would be desirable.

toffel969

vader wrote: ↑27 Dec 2017, 15:23 I have no LCD to test it, but the WIKI says:
SendToHTTP <IP address>, <Portnumber>, <command>

You are right, please ignore my previous post.

toffel969

try

Code: Select all

On System#Boot do
    timerSet,1,10
endon
On Rules#=1 do
  SendToHTTP <IP>,80/control?cmd=lcd,1,1,test123
  lcd,2,1,- %systime% -
  timerSet,1,10
endon

You had a "," to many after the port number

toffel969

Maybe somebody ( with more coding abilities than me) can adapt the logic used for long pulse command to make a non-blocking pwm fade command

toffel969

The <fade-time> seems to be ignored for me?? For example; http://192.168.1.105/control?cmd=pwm,2,512 and http://192.168.1.105/control?cmd=pwm,2,512,10 both take the led up to half brightness instantaneously. Any suggestions? 10= 10msec, I doubt you can see the difference, try values from 1000=1 sec

toffel969

Dear everybody, This is my first post ;) (ESP Easy is very cool I use it everyday!) I already use the level control function (DHT22 + Relay for Gaz boiler) with a simple web interface. But I would like to play with PID control instead. What is the easiest way to do? Thank you in advance for your he...

toffel969

If you use an extender like the PCF8574 ( https://www.letscontrolit.com/wiki/index.php/PCF8574 ) a relay should not be doing crazy things anymore? It states that the PCF8574 keeps the GPIO states at ESP8266 reboot. I made that statement, it's true, I tried. You can reboot/reset the esp, gpio of pcf...

toffel969

Hi, in my house i am using Merten Argus Basic smoke detectors, which I want to become smart. They look good and Pollin has them for EUR 15,-/per 3 PCs. I bought them for 18,- each some years ago :cry: I have found out, that they use an IC called A5366CLWT. datasheet is here https://www.digikey.at/p...

toffel969

Hello to all, i've tried to search on the forum but I have not found a clear solution. I have this scenario: Domoticz 3.8153 on a raspberry pi 1 esp8266 flashed with esp easy v2.0.0-dev12 and a 4 relay modules for now i've configured only 1 relay, but the problem is simple, i can control the relay ...

toffel969

To make it clear we are talking about 3 different delays here.:
1 delay in rules
2 delay of devices
3 general message delay (advanced tab)
The TO Needs to remove 1 from rules. 2 of the switch must be 0. 3 is advised to 100msec( I can confirm papperones positive experience)

toffel969

One needs to be very careful when sourcing SSR. There are lots of fakes and parts with underdimensioned components, f.e. : https://www.youtube.com/watch?v=DxEhxjvifyY http://www.instructables.com/id/The-inner-workings-of-Counterfeit-FOTEK-SSRs/ My experience with ebay/Ali is equally bad. That's why ...

toffel969

I was hoping to do something like the code below instead (wanted to avoid having to wait 1 second for the first action to fire), but it doesn't work. Action1 is never triggered. Any idea how to work around this? on Button#State=1 do delay,300 if [Button#State]=0 //Action1 if button is short pressed...

toffel969

+1 :D i agree , ssr downright suck when trying to switch DC :lol: with AC they do have their advantages(switching at zero current, no arc, no wear), but downsides like leakage current (important when using low power LED) and heat generation must be considered in their application as well as their m...

toffel969

I've my own custom made solution, which is way better than sonoff, up to 3 relays and can control anything from 230VAC down to 5VDC :mrgreen: https://www.letscontrolit.com/wiki/index.php/User:Papperone/Module3xRelay It's small enough (80x60 mm) and I just need to design an enclosure fro external us...

toffel969

On a Sonoff you can't, since the power supply for the ESP part is drawn from mains. On the little device in this topic: you don't need to, since the relay will only be used for switching, so it doesn't really care what is attached. That is exactly what I am trying to point out. You can achieve the ...

toffel969

http://www.instructables.com/id/Wireles ... rduino-RF/

like this

toffel969

Yep, can be done with the internal communication over UDP.... https://www.letscontrolit.com/wiki/index.php/EasyGlobalSync Yes UDP is possible, but due to protocol it is not very reliable (no ack) Rather use http for that purpose. Everything you need to know for this is summed up in the rules tutori...

toffel969

As an idea, if you need to have the relay on a different purpose than switching mains, one can cut the traces to mains. On a Sonoff you can't, since the power supply for the ESP part is drawn from mains. On the little device in this topic: you don't need to, since the relay will only be used for sw...

toffel969

As an idea, if you need to have the relay on a different purpose than switching mains, one can cut the traces to mains.

toffel969

Sure, check the timer section of the rules tutorial: https://www.letscontrolit.com/wiki/inde ... rial_Rules

toffel969

Hello i want to control the temperatur with a simple 2-state control (on/off). My rules does not work and i don't know why. Does anyone see an error in my rule? Also if i test the relais with the gpio command they are inverted: 1 -> Off and 0 ->On (but this is a minor problem) on DS18#Temperature i...

toffel969

Bienvenue!

toffel969

Wow, who extended that part of the wiki so nicely?

Thanks shardan and grovkillen, you guys are awesome

toffel969

Because up to R148, there is no controller tab, so only one can be put into config at all. Thats why I asked, I didn't really see the part about the positions

. If you are already on Mega dev12 , then I can probably not help you.

toffel969

My bad, its just the first 13 links that contain info on email plugin for ESP easy Mega (2.0). But seriously, this is the end of this conversation, not productive. I'm pretty sure most devs/expierienced users just ignore requests that can be answered by search function/reading the wiki. I shall do t...

toffel969

Pro Mini Extender allows I/O transfers. Any way to transfer items other than I/O (like calculated values, generated alarms, control commands)? I'm hoping I'm missing something really simple here... Thanks TaskValueSet via Serial connection. Create Dummy device on ESP. Whenever the Arduino gots Data...

toffel969

Seems like a bug in the I2C expander plugin.

However, you should be able to workaround in rules, pending a fix of the plugin.

On dev#port>0.5 do
....

On dev#port>0.5 do

....

not very elegant, but should work time beeing

toffel969

If you have serial access then you could try to set the wrong wifi pw/ssid. It should return to ap mode after failing to connect. But what is that gonna help you? In ap mode you can just connect to wifi. But it should also show you its ip via serial output while connecting. For all commands https://...

toffel969

Given the battery operation, Shardans way is probably better. Also leaves the option to measure supply voltage once a day with analog, probably a good idea to get a warning notification before the juice runs out.

toffel969

Just call an event from domoticz . Instead of "gpio,13,0" as command take "event,aus". It will trigger the event aus.same works within rules

toffel969

You will probably have to remove the leds from block for battery op

toffel969

This one should work for you. https://www.ebay.de/i/322626735255?chn=ps&dispItem=1&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F707-134425-41852-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.de%25252Fi%25252F322626735255%25253Fchn%25253Dps%252526dispItem%25253D1%252...

toffel969

Check for LM 393. It basically is an IC that allows you to convert "two short circuit wires" into a reliable 1/0, sensitivity adjusted by poti. You can buy them as ready to use block. They have 2 outputs, digital and analog, where analog is proportional / inverse proportional to resistance...

toffel969

Huh, the time it took to create the little animation to show me how to search in Google may have been just as easily used to provide some information. It leaves me wondering why have forums at all when Google can be used as the master oracle. Reminds me of the old days cliche "read the manual&...

toffel969

Add

http://

to your URLs

toffel969

What version are you using?

toffel969

Is the search function broken?
http://lmgtfy.com/?q=email+notification+espeasy

toffel969

Yes correct

toffel969

All information required for this is nicely summed up in the wiki: https://www.letscontrolit.com/wiki/inde ... rial_Rules

toffel969

hi there, I want to make my smoke detector smart by attaching an esp to it. there is a trigger output on the smoke detector which goes to high on alarm. with it I will power up the esp - this means no deep sleep setup and absolutely no power consumption during standby. what do I have to add to rule...

toffel969

Do you get any serial feedback when trying to reboot?

After flashing connect via arduino ide serial monitor.
I had the same problem with sonoff. When connected to serial it showed numbers running up and after a minute or so it booted into ap mode

toffel969

I've tested it and does not work for me. I mean, you can not transmit values to an event. The parser seems to ignore more than 1 value after "event". It is only interested in the event name.... :D The messed rules seem to be an issue of core 2.4.0.... :? You can send values, check the wik...

toffel969

I just tested this on one of my nodes running R142

it definitly works the way I described

toffel969

vader wrote: ↑23 Oct 2017, 19:20 Not working. Messed the rules! BTW: TaskValueSet need 3 parameter...

You are right about the TaskValueSet needing 3 parameters. But then there is no reason y th shouldn't work

toffel969

The other options seems to retain the state on MQTT, that is if you use MQTT at all

Search found 469 matches