Let's Control It

ManS-H

That is correct. However.....no matter if I edit this before uploading, or enter the details afterwards by having access to the Sonoff, and click submit, it does not change. In this example it does accept the name change for the Sonoff module Mod2, but not the SSID. http://i66.tinypic.com/hv1l6f.jp...

ManS-H

dev0 wrote:512k/64k for the H801

Hello Dev0, that is not correct. The H801 has the same flash chip as the ESP-01, Flash Chip ID: 1327328
So you can use 1M (64K SPIFFS) for the H801.

I did it with my H801 and it going perfect.

ManS-H

Those boards are interesting indeed. I guess if it is used for projects like Domoticz that they work fine, and they safe a lot of space and energy. Maybe add an extra Sonoff to turn the Banana Pi on and off :lol: I wonder if this power supply, being sold as a LED power supply, and with build in EMI...

ManS-H

After a day trying and trying I am unable to find the solution. I keep getting error messages. warning: espcomm_sync failed error: espcomm_open failed error: espcomm_upload_mem failed If you follow the video, the guy is using putty. Do the same again. Connect the Sonoff and use Putty. 1 - command: ...

ManS-H

Thank you very much for the help. I have been trying to flash the Sonoff with the Arduino UNO, without succes. Also I have been trying again by following the video mentioned and also that failed. Arduino makes clear that compiling goes fine without any problem. I didn't know the correct amount of t...

ManS-H

I used the version R120. Strange enough it does not start it's own WiFi network like "ESP_0" I just wanted to try to upgrade it to the R145 version. On that I get the following error: stat ESPEasy_R120_1024.bin failed Did you use for flashing the 1024 file? I made my first mistake with fl...

ManS-H

I have bought 4 Sonoff modules, the version with WiFi only. Today I decided to use one of them and flash them with ESPeasy. The result is that the module does not create a new WiFi network, also the LED does not turn on. The flash went fine, no problems there, but once the flash procedure is done i...

ManS-H

Hi Guy's I'm currently testing with a relay board on an ESP module to control my household lighting. A second ESP is placed in the wall behind the existing wall switches. The wall switch is connected with a GPIO and a pull-up resistor. https://www.zelfbouw-domotica.be/224-thickbox_default/1-pole-sw...

ManS-H

Another sonoff device! https://www.itead.cc/sonoff-touch.html https://www.youtube.com/watch?v=JdeZ7tMgeNw Seems be based on ESP8285 with 1MB built in flash To day i received my Sonoff POW, inside was this leaflet. It shows another Touch switch the you described. See this one also not on http://www....

ManS-H

Hi, I'm very new to this, but I managed to set up my 2 D1 mini's. I flashed them with the ESPEasy_R120_4096.bin and after that I connected them to my WiFi. Now there are 2 things I like to do: 1. connect 1 with the TCRT5000 pulse meter, but I can't find a n00b section where this is explained. I nee...

ManS-H

I've created a basic plugin (29) for Milight emulation. Only responds to group 1. New item in devices - Milight RGBW. Set pins used and udp port for milight emulation. Only does basic colour/brightness plus a couple new other http commands. To use drop the plugin into the source directory and compi...

ManS-H

Hi i want to do the same in my house, i bought already the relais and ESP but i have a question: i see that you used the AXA wallsender to connect to the relais. do you actually need this extra wallsender? it makes it a bit more expensive. it looks that this wallsender has no active components, so ...

ManS-H

Sketch too big; There is not enough space, you have to remove some unused plugins. Please keep in mind that this is my support thread to request two new ESPEasy features/options and not a support thread for my plugin (that is still in development). dev0, problem solved, i can create a binfile so th...

ManS-H

512k/64k for the H801 Compiling ESPEasy_R147_RC8 with this settings i see this: Sketch uses 427,305 bytes (98%) of program storage space. Maximum is 434,160 bytes. Global variables use 50,012 bytes (61%) of dynamic memory, leaving 31,908 bytes for local variables. Maximum is 81,920 bytes. When i us...

ManS-H

Dear all, Due to personal reasons, i have to stop active development on ESP Easy. So this would be a good moment to hand over the project maintenance to members of the community. If anyone wants to take over the project control on github, please contact me by PM, so i can add you as a team member o...

ManS-H

You have to comple with ESPEasy R124 at least. See __ReleaseNotes.ino For my information, you compile the plugin with esp easy and flashed it in the H801, or do you use the Wemos D1 to send commands to the H801? You can flash it on a H801 or any other ESP8266 device to which your leds are connected...

ManS-H

I use different hardware: DIY with Wemos D1 and cheep Chinese H801 Controllers. Mostly only with warm white and cold white stripes to be able to adjust white color. For my information, you compile the plugin with esp easy and flashed it in the H801, or do you use the Wemos D1 to send commands to th...

ManS-H

Command description can be found on github, too: https://github.com/ddtlabs/ESPEasy-Plugin-Lights Interesting piece of work, but i have a question. What kind of hardware do you use? Is it a ready pcb from a firm or is it diy hardware. Is possible to tell what kind of hardware you use for this plugi...

ManS-H

Looks like DNS setting is incorrect or the provided IP does not 'relay' DNS requests. At least, without a working DNS, ESP Easy will not be able to get the current time and will start at 0:01... Thanks Martinus, That's the solution. I changed ESP DNS: 192.168.0.1 in 8.8.8.8 and the time is correct ...

ManS-H

Hello,

Is it possible to put a Wiki button on the forum, like Domoticz had?

: Wiki.JPG (27.71 KiB) Viewed 1609 times

ManS-H

@mans-h : I did not even know it defaults to an existing ntp server, but what happens if you use nl.pool.ntp.org ? I have that in all my ESPs. Edit: You are right about the default. It is here. I used your sugesstion: nl.pool.ntp.org and europe.pool.ntp.org When i fill the optional settings for IP,...

ManS-H

However, if you specify a static ip you need to give an NTP server (or pool) But this is from the Wiki: NTP Hostname Can be left empty as it defaults to pool.ntp.org. Can be changed here if needed. And the time from my Ziggo modem/router is: Current Time: Wed. Nov 16 19:35:37 2016 It's possible tha...

ManS-H

I see a strange thing with Build 120 and also at Build 145RC. When i fill the optional settings for IP etc. in Config i see that the time isn't correct. When i remove the settings the time is okay again. I did a reboot after the changes.

: Config; 145-4.JPG (56.96 KiB) Viewed 26883 times

: Main; 145-3.JPG (65.28 KiB) Viewed 26883 times

: Config; 145-2.JPG (57.07 KiB) Viewed 26883 times

: Main; 145-1b.JPG (68.3 KiB) Viewed 26883 times

: Tools - Advanced; 145-1a.JPG (60.03 KiB) Viewed 26883 times

ManS-H

Did you cross TX and RX?

ManS-H

Use a terminal program like ESPlorer. You can view the settins with command: settings
With WifiSSID <SSID> and WifiKey <Wifi WPA key> you can change your settings.

Then Save and Reboot

Succes.

: ESPEasy Commands.JPG (196.28 KiB) Viewed 3558 times

ManS-H

Yep, but isn't only submit
. But also reboot, and that wasn't in the wiki.

ManS-H

Since yesterday the window of my lavatory is onder full control of ESP Easy and Domoticz. For ESP Easy I used a Witty Board and a 2 channel relay board with opto. WC Raam.jpg ESP12F & Relais_rev01.jpg I modified a AXA wall switch and connect it with the relay board. Schakelaar.jpg The relays swi...

ManS-H

I've got a question, must i fill in all my ESP's the same number to make de Nodelist visible?

ManS-H

Welcome Eugene and Ton on this fantastic ESPEasy forum.

ManS-H

Nice, Martinus. Very helpfull.

ManS-H

Looks good, Martinus

ManS-H

Richard,
What kind of switches did you use? Pulse or the normal On/Off switches

ManS-H

Neteye,

Pin EN is CH_PD

ManS-H

Nice product that Awox Smartplug, but i dont like this in the specifications :
POWER
100-120 V, 10 A, 60Hz

It's not a type error, het the German Specifications:
STROMVERSORGUNG
100-120 V, 10 A, 60Hz

ManS-H

linasg wrote:In real the SSID and WPA key is to filled, Timezone Offset: I tried set 0; 1; 120 min but still nothing

Your ESP DNS: 212.59.1.1 is that correct?

Is't not 192.168.20.1 ?

Try 192.168.20.1 that is for me the only thing whats different with my settings.

ManS-H

I tried both servers, NTP still does not work . My settings are as follows (See pictures) What am I doing wrong? Thank You Try to leave the optional settings of ESP empty and fill the SSID and the WPAKey, maybe that is the problem. And i see that yoy have filled, Timezone Offset: (Minutes) with 1 m...

ManS-H

Hello I try to work with 108 and 115 ver. but still my NTP qere didn't get time from NTP server. I think all my setings is corect IP: 192.168.20.100/GW"192.168.20.1/SM:255.255.255.0/DNS:212.59.1.1 NTP enabled. But system time is looks like start time... Also I tried different NTP Hostnames but...

ManS-H

As there were some doubts on upgrading the black ESP-01 version modules though OTA, i decided to run an extra test to verify this process from R78 to current R108: Thanks Martinus to take time for my problem. When I started with the ESP-01 I followed the Arduino IDE Tutorial step by step, and here ...

ManS-H

My 3 devices are 2x ESP-1 and 1x Sonoff. I build the ESP's in a Lamp and AXA windowopener. Now i must remove them,connect them to a pc for updating. I like the OTA feature, but not for me working. I'm not sure if OTA feature works on 512k devices (eg. blue ESP-01) ;) Determine the size of the flash...

ManS-H

i've had similar problems when I did an update from R78 to R108. Directly after flashing the new version I removed power, connected Rx and Tx together.Reconnected power and waited a few minutes so the ESP has time to clear the data memory. Then disconnected power and removed the Rx/Tx short, reconn...

ManS-H

flash-erase multiple times in this forum (widespread ) here: http://www.esp8266.nu/forum/viewtopic.php?f=6&t=1732#p8014 and here: http://www.esp8266.nu/forum/viewtopic.php?f=6&t=55&p=8120&hilit=erase+flash#p8055 like: C:\Python27>esptool.py -p COM4 -b 115200 erase_flash Connecting.....

ManS-H

Dylan,

It's settings, or reset or reboot without the ""

ManS-H

Dylantje wrote:sorry..
I do not now any commands...
I try Reset and others:
http://www.esp8266.nu/index.php/ESPEasy ... _Reference

No thing change

P0rt is: 115200 and not 9600

When you type "settings", "reset" or "reboot" you must see something,

ManS-H

Dylantje wrote:nice stuff:
ScreenShot141.jpg

A reset i did try from esplorer...
Only no change

Try the ESPEasy commands.

ManS-H

Dylantje wrote:
ManS-H wrote:
Dylantje wrote:
Yep that is what i do...
Writing flash i see, and done @ the end...
Try this with the 78 & 108 version

Only the loop is every time there...

Try: http://esp8266.ru/esplorer/ and show us what you see.

ManS-H

Dear all, I did something wrong with my ESP Node MCU.... I did try to upgrde the firmware from 78 to108 with the webinterface. This option was looking ok. Only now is the esp in a reboot loop.... Is there a way to reset or factory-settings or clean the flash, or? Sounds similar what i had. Try to f...

ManS-H

Dear all, I did something wrong with my ESP Node MCU.... I did try to upgrde the firmware from 78 to108 with the webinterface. This option was looking ok. Only now is the esp in a reboot loop.... Is there a way to reset or factory-settings or clean the flash, or? Sounds similar what i had. Try to f...

ManS-H

Based on the logfiles, it looks like the ESP crashes from within some early stage in the SDK and it never gets to the ESP Easy application. This can happen if a certain flash area gets corrupted. So the only way is to erase the flash with some other tool. When i have time, i will try to run tests o...

ManS-H

Try this to erase Flash ? http://www.esp8266.nu/forum/viewtopic.php?f=6&t=1732#p8014 I will, but what program must i use with this command? C:\Espressif\utils>esptool.py -p COM3 -b 115200 erase_flash Update: C:\Python27>esptool.py -p COM4 -b 115200 erase_flash Connecting... A fatal error occurr...

ManS-H

Hello, I've got a serious problem with updating of my ESP's. I have 3x ESP-01 and 1x Sonof with R78. Working without any problem. Today i started with updating the devices with R105. I used EasyOTA, but all the devices didn't work any more, the Blue Led of Wifi was burning very bright and that's it...

Search found 281 matches