Mmmm looks great
I see some PINS on the board (flashing)
Are there perhaps more PINS avaleble fit Just like a pir or dht sensor
Search found 255 matches
- 18 Dec 2016, 14:43
- Forum: ESP Easy: Hardware
- Topic: Ebay Wifi Relay boards
- Replies: 55
- Views: 46852
- 18 Dec 2016, 13:16
- Forum: ESP Easy: Hardware
- Topic: Ebay Wifi Relay boards
- Replies: 55
- Views: 46852
Re: Ebay Wifi Relay boards
What are the different specs??
https://www.tindie.com/products/Armtron ... y-for-iot/
Whit this one?
https://www.tindie.com/products/Armtron ... y-for-iot/
Whit this one?
- 18 Dec 2016, 12:50
- Forum: ESP Easy: Hardware
- Topic: Ebay Wifi Relay boards
- Replies: 55
- Views: 46852
Re: Ebay Wifi Relay boards
MMM Thanks will order on of these!!!
incl a power supply on board great!!
Doe you have perhaps the exact dimensions...
Need to build this in a place...
incl a power supply on board great!!
Doe you have perhaps the exact dimensions...
Need to build this in a place...
- 17 Dec 2016, 00:26
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 187860
Re: H801 : RGB controller based on ESP8266 avalaible from China
mmm try to understand this with Domoticz... For 1 controller. I need to solder the pins I need to flash the ESPeasy firmware [ what setting do i need for the pin or why do i flash with ESPeasy??? ] I need to create 1 dummy RGBW switch Make sure the ip and names are correct, Make the 777 or? What map...
- 16 Dec 2016, 23:24
- Forum: ESP Easy: Software
- Topic: Realy board dimming [ Dombo ]
- Replies: 1
- Views: 2096
Realy board dimming [ Dombo ]
Dombo question...
I use a relay board.
Only is there perhaps a option to dim the light that is on this board?? [ channel ]
In my eyes.. when the board have contact set the power on the pin @ 50% ....
And that with a http:// command....
Or a better solution?
I use a relay board.
Only is there perhaps a option to dim the light that is on this board?? [ channel ]
In my eyes.. when the board have contact set the power on the pin @ 50% ....
And that with a http:// command....
Or a better solution?
- 16 Dec 2016, 22:03
- Forum: ESP Easy: Hardware
- Topic: Ebay Wifi Relay boards
- Replies: 55
- Views: 46852
Ebay Wifi Relay boards
Dear All, Someone now of this board can be flashed with Espeasy? http://www.ebay.com/itm/5V-4-Channel-Wifi-Relay-module-for-Arduino-LinkNode-R4-/282282424425?hash=item41b957f869:g:4cMAAOSwo4pYUOxy And 8 channel: http://www.ebay.com/itm/LinkSprite-8-Channel-Wifi-Relay-Module-Arduino-compatible-/28228...
- 14 Dec 2016, 23:11
- Forum: ESP Easy: General Discussion
- Topic: relais with ESP
- Replies: 0
- Views: 1584
relais with ESP
Dear All, I wil try to switch 6 [ led garden] lights with a relaisbord. Looks that it is work easy, icm with Domoticz. [ send just HTTP commands ] Only when the esp have a reboot the status of my relais is not correct Is there a solution possible? See something in the ESP software [ hardwaresettings...
- 14 Dec 2016, 22:30
- Forum: RFLink: Nederlands support forum
- Topic: Hoe schakel je milight lampen van CW naar WW
- Replies: 2
- Views: 3663
Re: Hoe schakel je milight lampen van CW naar WW
Je hebt er niet veel aan...
Maar een Yeelight wifi werkt veeel beter en is supported hardware in Domoticz..
Maar een Yeelight wifi werkt veeel beter en is supported hardware in Domoticz..
- 13 Dec 2016, 15:47
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 187860
Re: H801 : RGB controller based on ESP8266 avalaible from China
got him.... When i have time.. Just flash ESP Then mount the strip. [ picture please? ] Only what type of script is it? [ how do i set the script? ] And in Domoticz run a dummy, or can i run a dummy rgbw? [ what type? ] i do have 1 ESP do i need to change the script ? Or can i run it, when i buy mor...
- 28 Nov 2016, 09:17
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 187860
Re: H801 : RGB controller based on ESP8266 avalaible from China
thanks, for the fast repay..
Only i do not understand the gpi0 part.
Perhaps when i got the controller.
Hope you will help me when i got it @ home..
Only i do not understand the gpi0 part.
Perhaps when i got the controller.
Hope you will help me when i got it @ home..
- 28 Nov 2016, 08:08
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 187860
Re: H801 : RGB controller based on ESP8266 avalaible from China
@ Ledfreak3d... Great job!! Did order 1 of these to.. so hope i get it fast.. Please can give a small how to... do i need to flash the esp on it? How? [ see no pins or something.. ] Or just directly from my Wifi to the controller? And rgb incl a extra pin... can a controll a rgbw? How is it show in ...
- 24 Nov 2016, 20:52
- Forum: ESP Easy: General Discussion
- Topic: Relais Problem
- Replies: 11
- Views: 11620
Re: Relais Problem
:-) I did use espeasy buttons in the esp. Only you say that have to remove this, and that works much better, the gpio direct command. Only still i have a react time of 2-3 seconds... and still the pelletstove is going to high when i push the button. I did buy a SSR relais on ebay only not @ home: ht...
- 18 Nov 2016, 23:31
- Forum: ESP Easy: Projects / Applications
- Topic: WS2801 led strip
- Replies: 16
- Views: 21362
Re: WS2801 led strip
WS2801 perhaps working on the esp?
- 16 Nov 2016, 21:54
- Forum: RFLink: Unsupported devices
- Topic: Ikea "TRÅDFRI" smart lights serie based on ZigBee Light Link (ZLL)
- Replies: 25
- Views: 39706
Re: Ikea "TRÅDFRI" smart lights based on ZigBee Light Link (ZLL)
MMMThere are other possibilities as well.
What are the other options?
Can i solder the cc2530 on the pins, when they are in use for the other receiver?
2 wires 1 pin, no problem?
- 14 Nov 2016, 23:05
- Forum: RFLink: Unsupported devices
- Topic: Xiaomi Mi Smart Home
- Replies: 7
- Views: 19268
Re: Xiaomi Mi Smart Home
i will give a doorcontact [ from xiaomi ] for free to test/make it work..
Pm me
Pm me
- 07 Nov 2016, 01:15
- Forum: ESP Easy: General Discussion
- Topic: Relais Problem
- Replies: 11
- Views: 11620
Re: Relais Problem
hvdwolf wrote:I forgot something: You can use the pulse command.
http://www.letscontrolit.com/wiki/index.php/GPIO
mw
When i do that the relais stays on open....
There is no off command...
- 06 Nov 2016, 19:34
- Forum: ESP Easy: Projects / Applications
- Topic: AXA Remote 2.0 and ESP Easy
- Replies: 24
- Views: 27254
Re: AXA Remote 2.0 and ESP Easy
jaloers
Great job!!!
Great job!!!
- 27 Oct 2016, 22:29
- Forum: RFLink: Unsupported devices
- Topic: Ikea "TRÅDFRI" smart lights serie based on ZigBee Light Link (ZLL)
- Replies: 25
- Views: 39706
Re: Ikea "TRÅDFRI" smart lights based on ZigBee Light Link
Perhaps a webshop in BE....Ikea Tradfri..
When thtis going to work...
Is my whole house with Home Automation..
Cannot wait..
Good luck guys
Like to hear when i can buy some hardware....[ from the nodo webshop.. ]
- 26 Oct 2016, 21:29
- Forum: ESP Easy: Projects / Applications
- Topic: WS2801 led strip
- Replies: 16
- Views: 21362
Re: WS2801 led strip
kick..
Someone have this working with the espeasy software?
Looking for a rgbw controller...
With a esp and with domoticz..
Someone have this working with the espeasy software?
Looking for a rgbw controller...
With a esp and with domoticz..
- 26 Oct 2016, 21:26
- Forum: ESP Easy: General Discussion
- Topic: Relais Problem
- Replies: 11
- Views: 11620
Re: Relais Problem
It sounds as if you configured a device in EspEasy as input switch. That even gives strange effects with your relais (trust me. I had the same). Simply remove that switch device from Esp Easy and control your gpio pin from your domoticz frontend via the gpio 0/1 command. No device needed on the Esp...
- 24 Oct 2016, 19:38
- Forum: ESP Easy: General Discussion
- Topic: UV
- Replies: 4
- Views: 5742
Re: UV
Dear Ton.
Do not have time for this @ the moment..
When i have time hope you wil help me..
Thanks for your post
Do not have time for this @ the moment..
When i have time hope you wil help me..
Thanks for your post
- 21 Oct 2016, 16:28
- Forum: Introduce yourself
- Topic: Hello from Holland
- Replies: 5
- Views: 5337
Re: Hello from Holland
hello... great time here.. What system you have?? Watch @ Pv output... Upload your panels to that site..and you can there make your temp working with a integrated system.... http://pvoutput.org/intraday.jsp?id=15321&sid=15807 Your meteo system can you upload data with Domoticz Why lan?? Wifi is ...
- 11 Oct 2016, 21:13
- Forum: ESP Easy: General Discussion
- Topic: Relais Problem
- Replies: 11
- Views: 11620
Re: Relais Problem
mm did try this no luck @ all.
How is your config?
Edit.
When i set my Relais in the ESP as button low or as switch. [ and in Domoticz 1 sec off ]
Sometimes my relais is going on and off servel times. While i push 1 time @ the button...
How is your config?
Edit.
When i set my Relais in the ESP as button low or as switch. [ and in Domoticz 1 sec off ]
Sometimes my relais is going on and off servel times. While i push 1 time @ the button...
- 10 Oct 2016, 22:06
- Forum: ESP Easy: General Discussion
- Topic: Relais Problem
- Replies: 11
- Views: 11620
Re: Relais Problem
mgennip wrote:/control?cmd=pulse,12,1,500
switches GPIO12 to 5volts for 500ms
Works fine for my Dru fire place
mmm
And is he switching auto off then?
Or how do set this in Domoticz?
Edit:
With a relais?
- 10 Oct 2016, 20:53
- Forum: ESP Easy: General Discussion
- Topic: Relais Problem
- Replies: 11
- Views: 11620
Relais Problem
Dear all. Use multiple ESP with different sensors, GREAT work for this cheap board!! I use the espeasy icw Domoticz [ always the last beta ] 1 problem. I use 1 esp nodemuc for the control of my pellet stove. Almost perfect. 1 problem, the relais i give the Http command like in the wiki. http://<ESP ...
- 14 Aug 2016, 22:06
- Forum: ESP Easy: General Discussion
- Topic: $5 WiFi Dev Board Running Linux
- Replies: 10
- Views: 12535
Re: $5 WiFi Dev Board Running Linux
Better Battery live??
- 11 Aug 2016, 18:44
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291136
Re: ESP Easy Releases
That problem i had to when i diid a update on the fly..ambassadoro wrote:I tried a sonoff-device, now I cannot reach it any more. It said, Update ok and then it dissapeared.
Just the "old" way is the best in my eyes..
- 10 Aug 2016, 21:48
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291136
Re: ESP Easy Releases
Thanks guys for the really great work..
Flash some of my nodemcu with R120 ... [ not work with them yet ] flashing was simple as always..
Flash some of my nodemcu with R120 ... [ not work with them yet ] flashing was simple as always..
- 10 Aug 2016, 13:07
- Forum: ESP Easy: Hardware
- Topic: HC-SR501 PIR issue's
- Replies: 31
- Views: 37781
Re: HC-SR501 PIR issue's
Is the radar 5.8Ghz the best option?
- 10 Aug 2016, 13:05
- Forum: ESP Easy: Software
- Topic: Cannot see the Webinterface
- Replies: 2
- Views: 2512
Re: Cannot see the Webinterface
costo wrote:Sometimes it helps to clear cache of your browser.
Or maybe the ESP got a new IPnumber from your router. Log in on your router to see the IP's on your network.
Thanks the refresh was working..
Sometimes are the simplest thing to easy to understand
- 10 Aug 2016, 12:30
- Forum: Introduce yourself
- Topic: Hello from Holland
- Replies: 5
- Views: 5337
Re: Hello from Holland
hello
Dutchman to
Dutchman to
- 28 Jul 2016, 12:09
- Forum: ESP Easy: Software
- Topic: Cannot see the Webinterface
- Replies: 2
- Views: 2512
Cannot see the Webinterface
mmm I run version 108 on 3 of my esp8266 chips.
Only a strange behavior of this version...
After a day or 2-3 i cannot login any more to the webui...
The device are working good...
After a reboot everything is working ok..........
For a few days...
xxx
Only a strange behavior of this version...
After a day or 2-3 i cannot login any more to the webui...
The device are working good...
After a reboot everything is working ok..........
For a few days...
xxx
- 25 Jul 2016, 21:06
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
Thanks all..
I give up..
try a other board...
Hard to get for me..
I give up..
try a other board...
Hard to get for me..
- 25 Jul 2016, 19:01
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
flash-erase multiple times in this forum (widespread ) here: http://www.esp8266.nu/forum/viewtopic.php?f=6&t=1732#p8014 and here: http://www.esp8266.nu/forum/viewtopic.php?f=6&t=55&p=8120&hilit=erase+flash#p8055 like: C:\Python27>esptool.py -p COM4 -b 115200 erase_flash Connecting.....
- 25 Jul 2016, 13:39
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
Did everything again...
Is there no way to reset the flash?
Try to upload the new firmware:
No changesIs there no way to reset the flash?
- 25 Jul 2016, 12:48
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
sorry..
I do not now any commands...
I try Reset and others:
http://www.esp8266.nu/index.php/ESPEasy ... _Reference
No thing change
I do not now any commands...
I try Reset and others:
http://www.esp8266.nu/index.php/ESPEasy ... _Reference
No thing change
- 25 Jul 2016, 12:18
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
nice stuff:
Only no change
A reset i did try from esplorer...Only no change
- 25 Jul 2016, 11:51
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
Sounds similar what i had. Try to flash R108 directly with a serial connection. That works for me. Do you have a little how to?? Or a link Connect your device with a usb port and use the program inside ESPEasy_R108 Flash.png Fill the Comport, Flashsize en Build, that's all :D Yep that is what i do....
- 25 Jul 2016, 10:02
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Re: Reboot Loop
Dear all, I did something wrong with my ESP Node MCU.... I did try to upgrde the firmware from 78 to108 with the webinterface. This option was looking ok. Only now is the esp in a reboot loop.... Is there a way to reset or factory-settings or clean the flash, or? Sounds similar what i had. Try to f...
- 25 Jul 2016, 08:20
- Forum: ESP Easy: General Discussion
- Topic: Reboot Loop
- Replies: 21
- Views: 19752
Reboot Loop
Dear all,
I did something wrong with my ESP Node MCU....
I did try to upgrde the firmware from 78 to108 with the webinterface.
This option was looking ok.
Only now is the esp in a reboot loop....
Is there a way to reset or factory-settings or clean the flash, or?
I did something wrong with my ESP Node MCU....
I did try to upgrde the firmware from 78 to108 with the webinterface.
This option was looking ok.
Only now is the esp in a reboot loop....
Is there a way to reset or factory-settings or clean the flash, or?
- 18 Jul 2016, 16:25
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 694364
Re: New ESP gadget
did that no differencestozett wrote:adjust sensitivity on the pir?
- 18 Jul 2016, 09:29
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 694364
Re: New ESP gadget
I have a 5 pins Sonoff, so the fifth pin.
My pir:
http://2.bp.blogspot.com/-gKmipFgKO-w/V ... Sensor.png
My pir:
http://2.bp.blogspot.com/-gKmipFgKO-w/V ... Sensor.png
- 17 Jul 2016, 20:11
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 694364
Re: New ESP gadget
mmm
Perhaps someone have a solution for this problem??? There was the whole day nobody @ home...
Perhaps someone have a solution for this problem??? There was the whole day nobody @ home...
- 16 Jul 2016, 20:33
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 694364
Re: New ESP gadget
I am Happy... Thanks all... Flashed 2 sonoff with 5 pins... The hardest part is let go the black button on the good moment... Espeasy runs on 2 of my Sonoff!!! Works great.. ScreenShot114.jpg And got a pir on the ESP working to..:-) THANKS!!!! Edit: Somebody have this options working In Domoticz? Sc...
- 16 Jul 2016, 09:58
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 694364
Re: New ESP gadget
The pin with the square (first/left) is 3.3, then TX, RX, GND. You can ignore the fifth PIN for flashing. Make sure you got the right drivers for your USB2TTL, set everything up, push & hold the black button on your sonoff and THEN plug the whole thing into your USB. I understand the pins.. I n...
- 15 Jul 2016, 21:07
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 694364
Re: New ESP gadget
Help...:-( I have multiple 5 pins Sonoff ESP.. I used 3 different USB ttl.. No succes with the flash tool. I try R78 and R108.. Where do i go wrong? I can flash a nuc.. Only this Sonoff is a little different. I think i go wrong with the pins.. I try to change them.. no succes Some one have a good wo...
- 14 Jul 2016, 08:32
- Forum: ESP Easy: Software
- Topic: R108 issues
- Replies: 6
- Views: 6385
Re: R108 issues
mmm I do have problems to.. Is did flash 108 over my 78 version...[ with the flashtool ] After that my ESP became in a restart loop. Flash back to 78 loop to. Strange thing, i my mind is a flash a clean start.?? Only the ESP did remember al my old device[ dht,,1 wire etc ] How can i get a clean flas...
- 09 Jul 2016, 18:10
- Forum: ESP Easy: General Discussion
- Topic: New Version 108
- Replies: 0
- Views: 2464
New Version 108
Dear all, What are the different optiosn in the new 108 version. Is see some new hardware, is there a list for the new options. 1 thing i see.. mqtt Helper? ScreenShot092.jpg What type of sensor do i need the give this optin? [ or sensors? ] ScreenShot093.jpg And how is this mqtt working? And this i...
- 18 Jun 2016, 08:59
- Forum: RFLink: Unsupported devices
- Topic: Ikea ANSLUTA support
- Replies: 13
- Views: 13660
Re: Ikea ANSLUTA support
Stuntteam wrote:I picked one up at ikea..
CC2500 RF chip is used.
It will take time to analyze the signal and see if it can be implemented.
Price?
What paypal?
- 15 Jun 2016, 07:07
- Forum: ESP Easy: Projects / Applications
- Topic: ATO (Automatic Top Off)
- Replies: 7
- Views: 8813
Re: ATO (Automatic Top Off)
Perhaps this is the problem: