Let's Control It

Dylantje

How did you wiring to the esp?

Dylantje

Hard to get for me that mqtt...
Please how can i use mqtt with esp easy and Domoticz?
Is this option good for communication iin Domoticz?

Dylantje

Ik denk dat manjh bedoelt zonder de behuizing ;) nee hoor, dit is prima. Verbluffend hoeveel modellen er zijn. Ik gebruik zelf al een paar jaar een stel sensors die er net weer anders uitzien, maar hetzelfde werken. Toch zit er inwendig echt verschil in... [ als ik tijd heb :x wil ik daar ook wel f...

Dylantje

manjh wrote:ehm... foto van de hw pls

Zoiets?

Dylantje

China 7:

http://nl.aliexpress.com/item/High-grad ... 72351.html

: ScreenShot268.jpg (7.01 KiB) Viewed 31314 times

: ScreenShot269.jpg (120.91 KiB) Viewed 31309 times

Dylantje

China 6:
http://nl.aliexpress.com/item/KERUI-Wir ... 55636.html

: ScreenShot267.jpg (7.15 KiB) Viewed 33785 times

: ScreenShot269.jpg (103.45 KiB) Viewed 33778 times

Dylantje

Dear all..
Some have a good peace of firmware for the ESP to create a range extender or bridge.

My first option should be just a plugin type, that is use the copy settings from my router.

Dylantje

dear...
I have this sensor to..
Do you have this working in Domoticz?
Do you use a formula?

Or how do you get this working???

And yes a wiki love this wiki's..

xxx

Dylantje

the different frimware is for different hardware... RFXcom and RFXcomE And the 433 and 315 options... Perhaps in the future RFlink has new options...../ new hardware.... they have the same problem... I use the RFXcom years, great Hardware. I use RFlink from the almost the start. Also great hardware ...

Dylantje

i followed the link from the first post, mentioned there, that the sensor could work with 3.3 volt, but the user used a formula for the analog input: uv = uv * (3300 / 1023.0); // millivolts so you have to use a formula on the analog input, i guess...?? http://www.esp8266.nu/index.php/EasyFormula (...

Dylantje

The output from the ESP is i think not compatible with Domoticz...

: ScreenShot264.jpg (39.63 KiB) Viewed 15609 times

The lux is working great...
Is there option that the "Module" can work with this sensor icw Domoticz?

Dylantje

China 5
http://nl.aliexpress.com/item/433MHz-Wi ... 84439.html

: ScreenShot263.jpg (5.96 KiB) Viewed 33862 times

: ScreenShot269.jpg (129.21 KiB) Viewed 33779 times

Dylantje

China 4
http://nl.aliexpress.com/item/KERUI-Wir ... 53463.html

: ScreenShot262.jpg (4.88 KiB) Viewed 33862 times

: ScreenShot269.jpg (121.77 KiB) Viewed 33780 times

Dylantje

China 3:
http://nl.aliexpress.com/item/KERUI-Wir ... 00710.html

: ScreenShot261.jpg (7.4 KiB) Viewed 33880 times

: ScreenShot262.jpg (116.24 KiB) Viewed 33781 times

Dylantje

China 2:
http://nl.aliexpress.com/item/Smart-Wir ... Title=true

: ScreenShot260.jpg (6.95 KiB) Viewed 33881 times

: ScreenShot262.jpg (132.96 KiB) Viewed 33782 times

Dylantje

Can some one please tell me what data is sending the ESP to domoticz?
In what format?
The format should be:
UV;TEMP (10.2;18.5) or without temp: 10.2;0
I do not understand this,some one?

Dylantje

ai..
Stom...
dacht dat we bij 78 waren...
Maar dat is de espeasy....

Zie wel dat ik er een paar achter loop dus ga maar eens updaten kijken wat we nog gaan vinden in de buurt..

Thanks

Voor al jullie moois!!

Dylantje

Domoticz is simple and have a lot of protocols
when you understand ESPeasy with MQTT and Domoticz should work

Dylantje

Waar is laatste firmware te vinden?

Op de site:
https://sourceforge.net/projects/rflink/ niet
Op de blog niet
op de shop niet
google verdwaald..

Ergens een simpele link, voor als die nieuwe komt...
Moet ik meer hardware aanschaffen?>>

Dylantje

Guys....

Please..

Did it....
God find the A0 pin wher i do have to put the dat from the Ssensor...

Only now is killing the data my dummy sensor in Domotcz..

: ScreenShot245.jpg (30.29 KiB) Viewed 15647 times

Try first 1 and then a second...

Is this a Domoticz issue or a Esp?

Dylantje

Hello...

Try Domoticz with the esp...
You like this !!

Dylantje

mqqt is a no go for me.. I do not understand....
If you have a great how to....[ please ]
I will try to trace my family mobilephones with mqqt...

Why openhab and not Domoticz? [ more protocols ]

Hello..
Great time here.. [ i have ]

Dylantje

Great....
Is there hardware to buy?
To print in 3D?

Dylantje

Mooie zet... Maar hoe? Ik sluit de milight erop aan? En dan? Optie deze thread in Engels? Of een wiki met daarop werkende hardware? Alleen zou het updaten van de RF iets mooier kunnen [ in Domoticz weliswaar maar wie gebruikt deze niet?? ] maar nu moet ik mijn arduino uit mijn omgeving sleutelen om....

Dylantje

mmm Heb de stoute schoenen aangetroken na de deceptie van de mysensors op batterijen... Mijn idee. China pir hardware gebruiken om evt, leuke sensors te bouwen.. 1 gekocht En beeld in de RF link,,, Misschien iets om thread te maken met werkende hardware?? EDIT: Deze werkt MINDER goed, lijkt telken v...

Dylantje

Please some one??
What module do i need to use in the Espeasy

Dylantje

Do i need to connect all the wires...
GND VCC and the 2 hardware pins?

Dylantje

Dear.. i do have my 5 volt fan from china... Please some can help me make this fan works with the ESP... [ and domoticz ] I try: The dummy switchs: http://192.168.5.101/control?cmd=Pulse,12,0,600 Where i put the pin to 3.3v and a other time to 5volt ... And the ground to D6 Also the the ground and t...

Dylantje

mmm China has arrived here....
When i have time ... Give the lux a try...
Is it possible to set a lux and the Uv @ the 2 hardware pins?
Or perhaps 2 lux sensors on these pins...

I need more of then 1 sensor that is using the hardware pins

Dylantje

It is normal i2c bus, so you have to choose the ic2 pins. At the moment you have to alter the source a bit to support the 0x5c address of the bh1750.

Dear...
I am not so smart as you think perhaps...
I do not what the ic2 pins are...
Are this the hardware pins?

: ScreenShot225.jpg (32.74 KiB) Viewed 29806 times

Dylantje

So far I've tried only the BH1750. At least with the BH1750 it is possible to use two sensors on the same bus. "With the ADDR pin grounded, the address is as you have it 0x23, the other address is 0x5C (a simple bit inversion)." + Please tell me how i this is working in the easpeasy? What...

Dylantje

Does dis one send burst signal???

Dylantje

And are these workings/ supported?
What is the battery live?

Dylantje

Dear All, Is there some one that have waterproof sensors working... The Kaku waterproof motion have a burst signal. Zwave does not have more then 1 waterproof sensor. [ that one has a battery drains ] what i am looking for. A waterproof motion sensor A waterproof door contact. I hope there a some So...

Dylantje

is there perhaps a option that this going to work...
Is the hardware that is needed on the RFlink?

I buy one [ when i am @ Ikea ] or i will support one to a developer [ paypal ] to try it.

Dylantje

mmmm

Nope i am a domboo..
I build houses.... no sensors....
Sorry

Dylantje

ManS-H wrote:https://www.mysensors.org/build/uv

It have a analog output, so what do you think of Analog input?

Thanks..
Only...

: ScreenShot221.jpg (106.56 KiB) Viewed 15920 times

Then???

Dylantje

I hope it works better for you, my first order from China was 7 weeks, second was 9 weeks. Still waiting for the third, currently at 8 weeks. Shipping to Italy takes a little longer for some reason. It has taken over 3 weeks to get a letter 250 km within Italy! That is why i ordered more sensors......

Dylantje

Ok..

Only what device must i select in the esp

Dylantje

Dear all.
other sensor in the house...

http://www.ebay.com/itm/221534090900?_t ... EBIDX%3AIT

Will give a try..
Only what pin do i need??? can i use?

Dylantje

Perhaps buy this 2....
And try them...

And let us now....

Dylantje

When i get this sensor...
What "module" do i need in the ESP?
Just the analog, shows no pin?

: ScreenShot220.jpg (87.96 KiB) Viewed 17151 times

And i d'not now what to to use in that way

Dylantje

mmm When i get the sensor i wil give it a try... Hope you will help me @ that time.. xx You had better put a link with the sensor_type you have ordered. My mistake that I assumed you had bought a model with a [lineair output] edit: analog output. I understand from another topic you bought yourself ...

Dylantje

Found the Answer..

: ScreenShot219.jpg (88.75 KiB) Viewed 2798 times

Dylantje

Should be a nice extra....
RFlink support 2.4Ghz...

Is this perhaps possible?

Dylantje

Dear....
Is there perhaps a waterproof motionsensor suported bij the RFlink?
And then a sensor that is give no brust signal like the KaKu device

Dylantje

Sorry that i break in... Only i do have a other Uv sensor. And i wil get this working in Domoticz and ESP to.. So i hope this is no problem.. My sensor: http://www.ebay.com/itm/321971504239?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Whit a pinout of: http://i232.photobucket.com/a...

Dylantje

mmm When i get the sensor i wil give it a try...
Hope you will help me @ that time..
xx

Dylantje

Most cheap UV modules generate a analog output voltage that is proportional to the amount of UV so this is perfectly compatible with ESPEasy. Connect the outputPin of the module to the ADC pin of the ESP and make the voltage-range between 0-1 volt if nescessary. Some NodeMCU boards take an ADC inpu...

Dylantje

hahaha thanks.. Did change my typo...:-) Thanks .. I do have the sensors working: :-) ScreenShot176.jpg Still have a alarm working, for the temp.... [ can make scenes with Domoticz... ] Only i must wait on the lux.. [ Chinese :-( ] And wat i am also looking for is a UV sensor [ The dragon needs a re...

Search found 255 matches