FirePlace Jolly Mec

Post here about devices that are not yet or not fully supported

Moderators: Voyager, BertB, rtenklooster, Stuntteam

Post Reply
Message
Author
swil
Normal user
Posts: 1
Joined: 06 Nov 2018, 14:50

FirePlace Jolly Mec

#1 Post by swil » 06 Nov 2018, 15:21

Hi all

I m trying to decode data between my remote en fireplace, hope someone can help me ;)

Details :
fireplace : jolly synthesis 80
with his remote
that contain this ASK Transceiver

I had cuptured some data with
- le rflink,
- audacity : https://drive.google.com/open?id=1Aguuj ... z-B9mJmmCh
- protocol analyser : http://wiki.nethome.nu/doku.php/analyzer/start, nothing usable.
- Rc-switch and some protocolless fork … nothing usable.

by reading .wav captured with audacity
i got this :
- press remote to show requested temp, set to 20
- press remote to show requested temp, set to 20
- press remote to show requested temp, set to 21
- press remote to show requested temp, set to 21
- press remote to show requested temp, set to 22

https://drive.google.com/open?id=1qpb2O ... mEoGzDvZfe | https://drive.google.com/open?id=1ThqBA ... jGG19dmYEL

Here is my work with captures, pictures …
rflink show two debug lines for ONE command on remote.

for now, i'm unable to determine the period … i think this is PWM.
as visible in .wav, trame are pretty identicals … else start and end.
- start : i think this is the temperature ?
- end : the CRC ?
but i cant find my temperatures (20 / 21 / 22) in the small different part.

I'm now completly stuck … so if you want to help me, be welcom !

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests