Visonic Power Max 868Mhz

Post here about devices that are not yet or not fully supported

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Visonic Power Max 868Mhz

#1 Post by ayasystems » 01 Sep 2016, 22:28

Hi

Is visonic power max 868Mhz supported??

Here is my log

http://pastebin.com/UsuHMzDc

Is normaly have several entries on debug mode per second? It is not normal in my 433 device, only in 868

Regards

About visonic:

http://www.visonic.com/spain/es/Product ... ct-234-wpp

MCT-234 ESPECIFICACIONES:
Frecuencias (MHz): 433.92 MHz ú 868.95, (especificar según necesidades)
Modulación: ASK (ON-OFF keying)
Duración de Transmisión: Cada botón al ser presionado causa una transmisión d hasta 2 seg.
Alimentación: Pila alcalina de 12 V. tipo GP23A o equivalente.

costo
Normal user
Posts: 490
Joined: 21 Nov 2015, 15:03

Re: Visonic Power Max 868Mhz

#2 Post by costo » 01 Sep 2016, 23:59

It specifies this device as: Encoding: 28-bit ID, 4-bit and 32-bit function code jump.

I think this means the code changes every time you push a button. That is called a rolling code.
RFLink and most universal encoders/decoders cannot generate a rolling code.

User avatar
Stuntteam
Site Beheer
Posts: 658
Joined: 27 Jan 2016, 16:46

Re: Visonic Power Max 868Mhz

#3 Post by Stuntteam » 02 Sep 2016, 09:22

Generating rolling codes is not needed to receive alarm system sensors.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: Visonic Power Max 868Mhz

#4 Post by ayasystems » 02 Sep 2016, 09:32

So... Could be decoded Visonic 868Mhz by Rflink?

costo
Normal user
Posts: 490
Joined: 21 Nov 2015, 15:03

Re: Visonic Power Max 868Mhz

#5 Post by costo » 02 Sep 2016, 23:08

It specifies this device as: Encoding: 28-bit ID, 4-bit and 32-bit function code jump.

In theory, if RFLink has the right plugin, this code could be decoded.
That is, it would show you the 28 bit ID and probably the 4 bit function.
As far as I know, for now this plugin has not been written .

juanjogarciac
Normal user
Posts: 1
Joined: 08 Nov 2016, 21:24

Re: Visonic Power Max 868Mhz

#6 Post by juanjogarciac » 08 Nov 2016, 21:28

Hi all,

In Europe Visonic work over 868Mhz. How can help you to support this device? Is the code different with 433Mhz? I believe we only need to receive changes and we don't need rooling.

Thank you !!

Juanjo

inversions
Normal user
Posts: 1
Joined: 09 Oct 2020, 21:52

Re: Visonic Power Max 868Mhz

#7 Post by inversions » 09 Oct 2020, 21:58

Has there been any progress in supporting Visonic 868MHz devices?
I bought my RFLink believing Visonic were already supported, but it seems not.
It would be really great if these devices could be supported.

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests