Visonic Power Max 868Mhz

Post here about devices that are not yet or not fully supported

Moderators: rtenklooster, BertB, Voyager, Stuntteam

Post Reply
Message
Author
ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Visonic Power Max 868Mhz

#1 Post by ayasystems » 01 Sep 2016, 22:28

Hi

Is visonic power max 868Mhz supported??

Here is my log

http://pastebin.com/UsuHMzDc

Is normaly have several entries on debug mode per second? It is not normal in my 433 device, only in 868

Regards

About visonic:

http://www.visonic.com/spain/es/Product ... ct-234-wpp

MCT-234 ESPECIFICACIONES:
Frecuencias (MHz): 433.92 MHz ú 868.95, (especificar según necesidades)
Modulación: ASK (ON-OFF keying)
Duración de Transmisión: Cada botón al ser presionado causa una transmisión d hasta 2 seg.
Alimentación: Pila alcalina de 12 V. tipo GP23A o equivalente.

costo
Normal user
Posts: 490
Joined: 21 Nov 2015, 15:03

Re: Visonic Power Max 868Mhz

#2 Post by costo » 01 Sep 2016, 23:59

It specifies this device as: Encoding: 28-bit ID, 4-bit and 32-bit function code jump.

I think this means the code changes every time you push a button. That is called a rolling code.
RFLink and most universal encoders/decoders cannot generate a rolling code.

User avatar
Stuntteam
Site Beheer
Posts: 618
Joined: 27 Jan 2016, 16:46

Re: Visonic Power Max 868Mhz

#3 Post by Stuntteam » 02 Sep 2016, 09:22

Generating rolling codes is not needed to receive alarm system sensors.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: Visonic Power Max 868Mhz

#4 Post by ayasystems » 02 Sep 2016, 09:32

So... Could be decoded Visonic 868Mhz by Rflink?

costo
Normal user
Posts: 490
Joined: 21 Nov 2015, 15:03

Re: Visonic Power Max 868Mhz

#5 Post by costo » 02 Sep 2016, 23:08

It specifies this device as: Encoding: 28-bit ID, 4-bit and 32-bit function code jump.

In theory, if RFLink has the right plugin, this code could be decoded.
That is, it would show you the 28 bit ID and probably the 4 bit function.
As far as I know, for now this plugin has not been written .

juanjogarciac
Normal user
Posts: 1
Joined: 08 Nov 2016, 21:24

Re: Visonic Power Max 868Mhz

#6 Post by juanjogarciac » 08 Nov 2016, 21:28

Hi all,

In Europe Visonic work over 868Mhz. How can help you to support this device? Is the code different with 433Mhz? I believe we only need to receive changes and we don't need rooling.

Thank you !!

Juanjo

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests