I am using a Smarthome YC-4000B and I am having stability issues on the reception of commandes:
Hereafter a debug log for repetitive presses of the A ON button:
Similarly, I never got the D Off button work. Hereafter log for D ON then D Off20;04;DEBUG;Pulses=50;Pulses(uSec)=210,840,750,240,150,840,750,270,150,840,750,240,150,840,750,240,150,840,750,270,150,840,150,870,150,840,750,240,150,840,750,270,150,840,750,270,120,840,750,270,150,840,150,870,150,840,750,270,150,6990;
20;05;AB400D;ID=41;SWITCH=1;CMD=ON;
20;06;DEBUG;Pulses=50;Pulses(uSec)=270,840,750,240,150,840,750,270,150,870,720,270,150,840,750,240,150,840,750,240,150,870,150,840,150,840,750,240,150,840,750,240,150,840,750,270,150,840,750,240,150,870,150,840,150,840,750,270,150,6990;
20;07;AB400D;ID=41;SWITCH=1;CMD=ON;
20;09;DEBUG;Pulses=50;Pulses(uSec)=270,870,750,270,150,840,750,240,150,840,750,270,150,840,750,270,120,840,750,240,150,840,150,840,150,870,720,270,120,840,750,240,150,840,750,270,150,840,750,240,150,840,150,840,150,870,720,270,150,6990;
20;0A;AB400D;ID=41;SWITCH=1;CMD=ON;
20;0E;DEBUG;Pulses=50;Pulses(uSec)=300,870,750,240,150,840,750,270,150,870,750,240,150,840,750,270,150,840,750,270,120,840,750,270,150,840,750,270,150,870,720,270,150,870,720,240,150,840,750,270,750,270,750,270,750,270,750,270,150,6990;
20;0F;Eurodomest;ID=0aaaaa;SWITCH=00;CMD=ON;
I have had this issue with R42. I am now using R43 - but it is the same behavior.20;9A;DEBUG;Pulses=50;Pulses(uSec)=210,840,750,240,150,870,720,270,150,840,750,240,150,840,750,240,150,840,750,270,150,870,750,270,150,870,750,240,150,840,750,240,150,840,150,870,120,840,750,240,150,870,150,840,150,840,750,270,150,6990;
20;9B;AB400D;ID=41;SWITCH=4;CMD=ON;
20;9C;DEBUG;Pulses=50;Pulses(uSec)=240,840,750,270,150,840,750,240,150,840,750,240,150,840,750,240,150,840,750,270,150,840,750,240,150,840,750,270,150,840,750,270,150,840,150,870,120,840,750,240,150,870,720,270,120,840,150,840,150,6990;
20;9D;Kaku;ID=50;SWITCH=16;CMD=OFF;
Any idea?
Thanks!
Rico