Hi,
I bought a SPS-260 Chuango siren. I currently didn't succeeded in doing the siren working with RFLink.
I put the siren in learning mode (turn on, then press the learning button - a red led lights and a quick buzzer sound can be heard), but nothing happened when I send this code :
10;Chuango;ece9d7;02;ON;
Any help is welcome
[RESOLVED] Chuango SPS-260 Siren
Moderators: rtenklooster, Voyager, BertB, Stuntteam
[RESOLVED] Chuango SPS-260 Siren
Last edited by WoodySlum on 01 Apr 2017, 14:46, edited 1 time in total.
Re: Chuango SPS-260 Siren
You dont have a remote control?
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: Chuango SPS-260 Siren
Nope, the siren has only a learn button, no remote provided. It is designed to work with Chuango alarm, however I saw that Chuango devices should be supported with RFLink before buying.
Re: Chuango SPS-260 Siren
Some news. I successfully made this device working with this example :
1/ Turn on siren
2/ Push the learn button until a 'bip' is heard
3/ Send this kind of code through RFLink : 10;ev1527;000080;1;ON;
4/ Siren should bip one time to confirm that code has been learned
5/ You're done !
To trigger siren :
10;ev1527;000080;2;ON;
To stop siren :
10;ev1527;000080;1;ON;
1/ Turn on siren
2/ Push the learn button until a 'bip' is heard
3/ Send this kind of code through RFLink : 10;ev1527;000080;1;ON;
4/ Siren should bip one time to confirm that code has been learned
5/ You're done !
To trigger siren :
10;ev1527;000080;2;ON;
To stop siren :
10;ev1527;000080;1;ON;
Re: [RESOLVED] Chuango SPS-260 Siren
Thanks Woody for this informations.
Now, i have to learn how to make domoticz use this!
Now, i have to learn how to make domoticz use this!
Who is online
Users browsing this forum: No registered users and 17 guests