Weather sensor TFA 30.125 supported but not working

[glsf91]

I have a TFA 30.3125 weather sensor. According to the list it is supported.

But it doesn't show up in RFLink (latest version). I tried several other versions without success. I can see other weather sensors so my RFLink with RXB6 is working.

With debug I see:
20;0A;DEBUG;Pulses=88;Pulses(uSec)=1200,720,1440,780,1410,840,1380,840,540,870,1350,870,510,900,1320,900,1320,900,1290,900,1320,930,1290,930,1290,930,1290,930,1290,930,1290,930,480,930,1290,930,1290,930,480,930,1290,930,480,930,480,930,480,930,1290,930,480,930,480,930,1290,930,1290,930,1290,930,1290,930,1290,930,1290,930,450,930,480,930,450,930,1290,930,480,930,480,930,1290,930,480,930,450,930,1290,930,480,6990;
20;0B;DEBUG;Pulses=52;Pulses(uSec)=1290,900,450,870,1200,870,450,900,450,870,420,900,1290,930,450,930,480,930,1290,930,1290,930,1260,930,1290,930,1290,930,1260,930,450,930,450,930,480,930,1260,930,450,930,450,930,1290,930,450,930,450,930,1260,930,480,6990;
20;0C;DEBUG;Pulses=88;Pulses(uSec)=1500,810,1380,840,1350,870,1350,870,510,870,1320,900,510,900,1320,900,480,900,510,930,480,900,1290,930,1290,930,1290,930,1290,930,1290,930,480,930,1290,930,1290,930,1290,930,1290,930,480,930,450,930,1290,930,1260,930,480,930,450,930,1290,930,1290,930,1260,930,1260,930,1260,930,1260,930,450,930,450,930,1290,960,1260,960,450,960,450,930,1260,930,450,960,1260,960,1260,960,1260,6990;
20;0D;DEBUG;Pulses=50;Pulses(uSec)=960,900,1200,900,420,900,420,900,1200,900,1230,960,450,960,450,960,1260,960,1260,960,1260,960,1260,960,1260,960,1260,960,450,960,450,960,1260,960,1260,960,450,960,450,960,1260,960,450,960,1260,960,1260,960,1260,6990;

I think it is the lines with Pulses=88.

How can I make this working?