someone can help me ?
here a doorbell ELEPOWSTAR very nice product but impossible to SEND informations to the wall receiver
RFLINK can received the trame but not transmitted it.
i have tried all protocols. If some seems similars no way no ringbell. I only have a ringtone with RCswitch from arduino sketch with protocol 1 pulse 185 look at the end of this post
-----------------
20;23;DEBUG;Pulses=511;
Pulses(uSec)=180,390,180,390,150,390,510,60,510,30,150,5610,510,60,120,420,510,60,510,60,150,420,150,390,510,30,540,0,540,30,540,30,150,390,540,30,150,420,150,390,540,60,510,60,510,60,120,
450,120,450,120,450,120,450,90,450,480,90,510,60,120,5640,510,60,120,420,510,30,570,30,150,420,150,420,510,60,510,60,510,60,480,90,120,450,510,90,90,450,120,450,480,90,480,90,480,90,90,450,
90,450,90,450,90,450,90,450,480,90,480,90,90,5640,510,60,120,450,510,60,510,60,120,450,120,450,480,90,480,90,480,90,480,90,90,450,480,90,90,450,90,450,480,90,480,90,480,90,90,450,90,450,90,
450,90,450,90,450,480,90,480,90,120,5640,480,90,90,450,480,90,480,90,90,450,90,450,480,90,480,90,480,90,480,90,90,450,480,90,90,480,90,450,480,90,480,90,480,90,90,450,90,450,90,450,90,450,90,
450,480,90,480,90,90,5670,480,90,90,450,480,90,480,90,90,450,90,450,480,90,480,90,480,90,480,90,90,450,480,90,90,450,90,450,480,90,480,90,480,90,90,450,90,480,90,480,90,450,90,450,480,90,480,
90,90,5670,480,90,90,480,480,90,480,90,90,450,90,450,480,90,480,90,480,90,480,90,90,450,480,90,90,450,90,450,480,90,480,90,480,90,90,480,90,480,90,480,90,480,90,480,480,90,480,90,90,5670,480,
90,90,450,480,90,480,90,90,450,90,450,480,90,480,90,480,90,480,90,90,480,480,90,90,480,90,480,480,90,480,90,480,90,90,480,90,480,90,480,90,480,90,480,480,90,480,90,90,5670,480,90,90,450,480,90,
480,90,90,480,90,480,480,90,480,90,480,90,480,90,90,480,480,90,90,480,90,480,480,90,480,90,480,90,90,480,90,480,90,480,90,480,90,480,480,90,480,90,90,5670,480,90,90,480,480,90,480,90,90,480,60,
480,480,90,480,90,480,90,480,90,90,480,480,90,90,480,90,480,480,90,480,90,480,90,90,480,90,450,90,450,90,480,90,480,480,90,480,90,90,5700,480,90,90,480,480,90,480,120,60,480,90,480,480,90,480,
90,480,90,480,90,90,480,480,90,90,480,90,450,480,90,480,90,480,90,90,480,90,480,90,480,90,480,90,480,480,90,480,120,90;
20;24;Doorbell;ID=9e9c;SWITCH=1;CMD=ON;CHIME=01;
------------------------
rflink send command:
10;Doorbell;ID=9e9c;SWITCH=1;CMD=ON;CHIME=01;
20;25;CMD UNKNOWN;
------------------------
but works with this in arduino sketch :
////
Code: Select all
#include <RCSwitch.h>
....
mySwitch.setProtocol(1);
//Optional set pulse length.
mySwitch.setPulseLength(185);
//Optional set number of transmission repetitions.
mySwitch.setRepeatTransmit(3);
.......
//button 3
Serial.println("Envoi Button 3");
mySwitch.send("101000111101001010000011");
Trames received with RCSwitch :
SONNETTE BUTTON 1 9e9c ---> 1001111010011100
Decimal: 11785091 (24Bit) Binary: 101 1001111010011100 00011 Tri-State: not applicable PulseLength: 185 microseconds Protocol: 1
Raw data: 5784,556,216,168,584,556,216,556,212,172,580,168,584,552,216,552,220,552,216,552,220,160,592,552,220,164,592,164,588,556,216,556,216,556,216,160,592,164,596,160,592,164,592,160,588,552,220,548,224,
SONNETTE BUTTON 2 1e94 --> 0001111010010100
Decimal: 2347651 (24Bit) Binary: 001 0001111010010100 00011 Tri-State: not applicable PulseLength: 185 microseconds Protocol: 1
Raw data: 5732,96,576,264,448,600,392,128,692,16,644,116,124,456,508,592,168,632,156,596,180,564,172,560,228,80,644,116,628,524,228,116,128,128,348,104,100,184,532,200,560,168,600,124,628,508,232,528,284,
with "101 0001111010010100 00011" middle part 0001111010010100 ----> ID= 1e94
10;Doorbell;ID=1e94;SWITCH=1;CMD=ON;CHIME=01;
and thanks for sharing and your project.