Temp no decode

Post here about devices that are not yet or not fully supported

Moderators: rtenklooster, BertB, Voyager, Stuntteam

Post Reply
Message
Author
Patmoorea
Normal user
Posts: 2
Joined: 18 Feb 2019, 20:41

Temp no decode

#1 Post by Patmoorea » 17 Apr 2019, 02:51

Hello
I use rflink for a while for my home automation everything works wonders I just bought a weather station https://en.aliexpress.com/item/Num-riqu ... 6c37614QLI rflink decode that randomly or when we support on the button to send the signal of the snde even I noticed that it was necessary to press twice the button so that it is to decode an idea?
below an extract from the debug rflink

08:27:08.388 -> 20;72;Xiron;ID=5D03;TEMP=0123;HUM=95;BAT=OK;
08:27:15.717 -> 20;73;RFUDEBUG=ON;
08:27:18.157 -> 20;74;DEBUG;Pulses=114;Pulses(uSec)=450,1770,450,840,420,840,420,840,420,840,420,1800,420,360,420,3750,420,840,420,1800,420,840,420,1800,420,1800,420,1830,420,840,420,1800,420,1800,420,1800,420,1800,420,840,420,840,420,840,420,840,420,1800,420,840,420,840,420,1830,420,840,420,1800,420,840,420,840,420,1830,420,1800,420,1830,420,1800,420,1800,420,840,420,1800,420,1830,390,870,420,840,420,840,420,840,420,1800,420,600,420,3750,420,840,390,1830,390,840,390,1830,420,1800,420,1800,420,840,420,1800,420,1830,390,1830,390,1830;
08:27:18.393 -> 20;75;DEBUG;Pulses=144;Pulses(uSec)=390,840,360,1740,360,1740,360,1770,330,900,360,1860,360,1920,300,1860,390,1860,360,870,390,870,390,870,390,900,360,1860,360,900,360,900,330,1890,360,870,390,1830,390,870,390,870,360,1890,330,1860,360,1890,330,1890,360,1860,390,870,390,1830,390,1860,360,870,390,870,390,900,360,930,330,1860,390,600,390,3780,390,870,390,1860,360,870,390,1890,300,1920,330,1830,390,870,420,1830,420,1830,390,1860,390,1890,330,960,300,960,300,870,420,870,390,1830,420,840,420,870,390,1830,390,870,360,1950,270,1110,150,900,390,1830,390,1830,420,1830,420,1830,390,1860,360,3360,330,1860,390,870,420,840,420,840,420,870,390,1830,390,6990;
08:27:21.406 -> 20;76;DEBUG;Pulses=114;Pulses(uSec)=450,1770,450,810,450,810,420,840,420,840,420,1800,420,330,450,3720,450,840,420,1770,450,810,420,1800,420,1800,420,1800,450,810,450,1800,420,1800,420,1800,420,1800,420,840,420,840,420,840,420,840,450,1800,420,840,420,840,420,1800,420,840,420,1830,390,840,420,870,420,1800,420,1800,420,1800,420,1800,420,1800,390,870,390,1830,420,1800,450,810,420,810,420,840,420,840,420,1800,420,360,420,3750,390,840,420,1800,420,840,420,1800,420,1800,420,1800,420,870,390,1830,420,1800,450,1800,420,1800;
08:27:21.655 -> 20;77;DEBUG;Pulses=146;Pulses(uSec)=450,810,360,1770,330,1770,330,1800,300,930,330,1830,390,1830,390,1830,390,1830,390,870,390,870,390,900,360,900,360,1860,390,840,420,870,390,1830,390,870,390,1860,360,870,390,870,360,1860,360,1860,420,1830,390,1830,390,1830,390,870,390,1830,390,1860,360,870,390,870,420,840,390,870,390,1830,390,390,390,3780,390,870,390,1860,360,870,390,1830,390,1830,390,1830,390,870,390,1830,390,1830,390,1830,390,1830,420,870,390,870,390,870,390,870,360,1830,420,870,390,870,390,1860,360,870,420,1830,390,870,390,870,390,1830,390,1830,390,1830,390,1860,360,1830,420,870,390,1830,390,1860,360,870,390,870,390,870,390,870,360,1860,360,6990;

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests