Telco protocol

Post here about devices that are not yet or not fully supported

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
nenessjunior
New user
Posts: 1
Joined: 09 Aug 2020, 13:16

Telco protocol

#1 Post by nenessjunior » 09 Aug 2020, 13:19

Hello, can you decode these frames received from a telco brand remote control?
Thank you




10;rfdebug=on;
20;08;RFDEBUG=ON;
20;09;DEBUG;Pulses=192;Pulses(uSec)=240,90,270,330,270,360,360,240,240,360,300,330,240,390,210,390,240,360,240,390,240,360,210,390,240,390,210,390,210,390,210,420,210,390,180,420,210,390,210,420,210,420,180,420,180,420,180,420,180,180,390,210,390,180,390,180,390,180,390,210,390,180,390,210,390,180,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,3690,360,600,360,240,780,240,360,240,360,630,360,240,360,240,360,240,360,240,750,240,360,240,360,660,360,240,750,240,360,660,750,240,360,240,360,660,360,270,330,240,750,660,750,660,750,240,360,660,750,660,750,660,330,270,750,660,750,660,330,270,330,270,750,270,330,270,330,660,330,270,330,270,750,660,750,270,330,270,330,660,750,660,330,270,330,270,750,270,330,270,330,660,330,270,330,270,300,6990;
20;0A;DEBUG;Pulses=188;Pulses(uSec)=840,150,330,270,300,300,390,210,270,360,240,360,270,330,240,360,210,390,210,390,210,390,180,420,210,390,210,420,180,420,180,420,210,390,180,420,180,420,210,420,210,420,210,420,180,420,180,180,420,180,390,180,390,180,390,210,390,180,390,180,390,180,360,210,360,210,360,210,390,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,3690,360,600,360,240,780,630,780,210,360,240,360,630,360,240,360,240,750,630,750,240,360,240,360,240,360,630,750,240,360,630,750,240,360,240,360,660,750,660,750,240,360,240,360,660,750,240,360,660,750,660,750,240,360,240,360,660,330,240,330,270,330,270,750,660,750,240,360,240,360,660,330,270,750,240,360,270,330,270,330,660,750,240,360,660,330,270,750,660,750,270,330,270,330,660,330,6990;
20;0B;DEBUG;Pulses=196;Pulses(uSec)=990,510,300,330,420,180,240,360,240,360,270,360,420,180,180,420,240,360,270,330,240,360,210,390,240,360,210,390,210,390,210,390,180,420,210,390,180,420,210,420,210,420,180,420,210,420,180,420,180,180,390,180,390,180,390,180,390,180,360,210,390,180,390,210,360,210,360,210,390,180,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,3690,360,210,360,630,780,240,360,630,360,240,360,240,360,240,780,630,750,240,360,630,360,240,360,240,750,240,360,660,360,240,750,630,360,240,360,240,330,240,360,240,360,240,750,660,330,240,750,660,750,240,360,240,360,660,330,270,330,270,330,270,750,660,750,660,750,270,330,660,330,270,330,270,330,270,330,270,330,270,330,270,750,270,330,270,360,660,330,270,750,660,750,240,360,660,330,270,330,270,330,270,330,6990;
20;0C;DEBUG;Pulses=194;Pulses(uSec)=810,360,270,330,450,180,240,360,1020,390,210,390,210,390,240,360,240,390,240,390,210,390,210,390,210,390,210,420,210,390,210,390,210,390,180,420,180,420,180,420,180,420,180,420,180,420,180,180,390,180,390,180,390,180,390,180,390,180,390,180,390,180,360,210,390,180,360,210,390,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,210,360,3690,360,600,360,240,780,240,390,240,390,240,360,630,360,240,360,240,360,240,750,240,360,240,360,240,360,630,750,630,780,240,360,240,360,240,360,240,360,660,330,270,750,660,750,660,750,660,330,270,750,660,750,660,330,270,750,270,360,270,330,660,330,270,330,270,750,270,330,270,360,240,360,660,330,270,330,270,750,270,360,270,330,270,330,270,360,660,750,660,330,270,750,270,330,270,330,270,330,660,330,270,300,6990;

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest