Meiantec 868Mhz devices

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
Jean-Nicolas
Normal user
Posts: 4
Joined: 11 Mar 2018, 12:27

Meiantec 868Mhz devices

#1 Post by Jean-Nicolas » 11 Mar 2018, 12:33

My Meian Door contacts & motion detectors are not recognized by a Nodo shop 868MHz RFLink using RfLink 1.48 version.
I thought these devices were Visonic compatible.

Did I miss something ?

Thanks

User avatar
Stuntteam
Site Beheer
Posts: 666
Joined: 27 Jan 2016, 16:46

Re: Meiantec 868Mhz devices

#2 Post by Stuntteam » 12 Mar 2018, 13:03

Make a debug log and send that to me..
Here are instructions on how to do that:
http://www.rflink.nl/blog2/development
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Jean-Nicolas
Normal user
Posts: 4
Joined: 11 Mar 2018, 12:27

Re: Meiantec 868Mhz devices

#3 Post by Jean-Nicolas » 12 Mar 2018, 14:06

Thanks,

I attached a file with debug info for door contact and PIR.

Regards,
Attachments
Meian 868 Devices Debug.zip
(2.2 KiB) Downloaded 166 times

Jean-Nicolas
Normal user
Posts: 4
Joined: 11 Mar 2018, 12:27

Re: Meiantec 868Mhz devices

#4 Post by Jean-Nicolas » 20 Mar 2018, 17:02

Any feedback ?

Jean-Nicolas
Normal user
Posts: 4
Joined: 11 Mar 2018, 12:27

Re: Meiantec 868Mhz devices

#5 Post by Jean-Nicolas » 23 Mar 2018, 18:47

Does anyone have an idea of the problem.
As far as I know The meian MD 210R 868Mhz door contact is the same than the Atlantic's one which is supported by RFLink V1.48.

The debug info I get look strange as there is just an alternance of short and long pulse :
20;20;DEBUG;Pulses=223;Pulses(uSec)=2220,300,690,300,690,300,720,300,720,330,690,300,690,270,720,270,750,300,690,300,690,300,690,300,720,270,720,300,690,330,660,300,690,300,690,300,690,300,690,330,690,270,750,300,690,270,720,300,720,300,690,300,720,300,690,300,690,330,660,330,660,270,720,270,720,300,720,300,690,300,720,270,750,270,3900,270,720,330,690,300,690,300,720,330,690,300,720,330,690,300,690,270,750,270,720,300,720,270,720,300,690,300,720,300,720,300,720,330,660,300,690,300,690,300,690,300,690,270,720,300,720,270,720,300,690,270,750,300,690,270,720,270,720,330,660,330,690,300,720,300,720,300,720,300,690,300,690,300,3900,300,720,270,720,300,720,300,690,330,690,270,720,330,690,270,720,330,690,300,690,270,720,240,750,300,720,270,750,300,720,270,720,270,750,300,690,300,690,300,720,300,720,270,690,300,720,300,690,270,750,240,750,300,720,270,750,270,750,300,690,300,690,300,720,300,720,300,720,330,660,300,720,300,6990;

I wonder if my RFLink is working properly.

Davison
Normal user
Posts: 1
Joined: 19 Apr 2018, 09:17

Re: Meiantec 868Mhz devices

#6 Post by Davison » 19 Apr 2018, 09:19

I'm having the same issue.
Know what, I'm happy to say this phone casino register uk is generous with info. There you can find any info you need. This is great, huh?

Menfin
Normal user
Posts: 1
Joined: 25 Nov 2020, 09:05

Re: Meiantec 868Mhz devices

#7 Post by Menfin » 25 Nov 2020, 09:09

Same issue with Meian MD210 868 mhz
Did you find a solution ?

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests