Code: Select all
avrdude -v -p atmega2560 -c stk500 -P /dev/ttyUSB0 -b 115200 -D -U flash:w:/home/pi/RFLink.cpp.hex:i
Now I have put an NRF24L01 on the arduino to use some MiLight stuff.
In the wiki:
But I do not use the windows loader program. (I cannot, no MS crap in my house I 'm afraid )Use the latest RFlink Loader to flash the latest firmware.
After flashing, select the serial port, enable serial port logging and press the button to enable MiLight/NodoNRF.
Questions:
How to send and what commands to enable the milight part.
And are these commands static?.
Or do I have to send them again after reboot or powerloss?