Problem with keypress ever 1 sec

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
ljmarkus
New user
Posts: 2
Joined: 20 May 2019, 14:13

Problem with keypress ever 1 sec

#1 Post by ljmarkus » 20 May 2019, 14:19

Hello,

I use the Aurel TX6M HCS Sender and wen i pressed ever 1 sec one Key, RFLink not decode the Signal.

Code: Select all

2019-05-20 14:08:55 - 20;05;DEBUG;Pulses=156;Pulses(uSec)=360,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,3900,660,330,660,330,660,330,270,720,660,330,270,720,660,330,270,720,270,720,660,330,660,330,270,720,690,330,270,720,270,720,270,720,660,330,660,330,270,720,270,720,660,330,660,330,270,720,660,330,270,720,660,330,660,330,270,720,270,720,660,330,660,330,270,720,270,720,660,330,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,690,330,270,720,660,330,270,720,270,720,270,720,690,330,270,720,270,720,270,720,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,660,330,690,330,270,720,660,330,660,330,660,6990;
20;06;Keeloq;ID=9e57;SWITCH=02;CMD=ON;BAT=OK;
2019-05-20 14:08:56 - 20;07;DEBUG;Pulses=156;Pulses(uSec)=360,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,3900,660,330,660,330,270,720,270,720,690,330,270,720,270,720,270,720,660,330,660,330,270,720,270,720,270,720,660,330,270,720,270,720,270,720,690,330,660,330,270,720,660,330,660,330,270,720,660,330,270,720,660,330,270,720,660,330,270,720,690,330,270,720,660,330,270,720,660,330,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,660,330,270,720,660,330,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,690,330,660,330,270,720,660,330,660,330,660,6990;
2019-05-20 14:08:57 - 20;08;DEBUG;Pulses=156;Pulses(uSec)=360,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,3900,270,720,660,330,660,330,660,330,690,330,270,720,270,720,270,720,270,720,270,720,270,720,660,330,270,720,270,720,270,720,660,330,270,720,660,330,270,720,660,330,270,720,660,330,690,330,270,720,270,720,660,330,270,720,270,720,270,720,270,720,270,720,660,330,270,720,660,330,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,690,330,270,720,660,330,270,720,270,720,270,720,690,330,270,720,270,720,270,720,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,690,330,660,330,270,720,660,330,660,330,660,6990;
2019-05-20 14:08:58 - 20;09;DEBUG;Pulses=156;Pulses(uSec)=360,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,3900,690,330,270,720,270,720,270,720,270,720,270,720,690,330,690,330,270,720,270,720,660,330,660,330,270,720,660,330,660,330,660,330,660,330,660,330,270,720,270,720,660,330,270,720,270,720,660,330,660,330,270,720,270,720,270,720,270,720,270,720,270,720,690,330,270,720,660,330,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,660,330,270,720,690,330,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,660,330,660,330,660,6990;
2019-05-20 14:08:59 - 20;0A;DEBUG;Pulses=156;Pulses(uSec)=360,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,330,270,3900,270,720,270,720,660,330,270,720,270,720,270,720,660,330,690,330,660,330,270,720,660,330,660,330,270,720,660,330,270,720,270,720,660,330,270,720,270,720,270,720,660,330,660,330,660,330,660,330,270,720,660,330,270,720,270,720,270,720,660,330,660,330,690,330,270,720,660,330,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,660,330,270,720,660,330,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,270,720,270,720,660,330,270,720,270,720,270,720,270,720,660,330,660,330,270,720,660,330,660,330,660,6990;
Whats wrong?

Thanks,
Markus
Last edited by ljmarkus on 20 May 2019, 15:35, edited 1 time in total.

User avatar
Stuntteam
Site Beheer
Posts: 787
Joined: 27 Jan 2016, 16:46

Re: Problem with keypress ever 1 sec

#2 Post by Stuntteam » 20 May 2019, 14:37

Nothing.
Pressing a button just shortly or pressing it very long does not generate a different signal.
This means RFlink does not need to repeat the same signal over and over.
All works as expected.

What do you believe is wrong then?
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

ljmarkus
New user
Posts: 2
Joined: 20 May 2019, 14:13

Re: Problem with keypress ever 1 sec

#3 Post by ljmarkus » 20 May 2019, 14:48

okay,

is there any way to activate the decode the same signal?

Thanks,
Markus

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests